My profile & Contact

Monster Hunter World
How to make Origin set armor's slinger (with templates)



Materials
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5sheets

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 30cm
→3mm thick 100cm X 30cm
→5mm thick 100cm X 50cm
→10mm thick 100cm X 50cm
-Styrofoam
→30mm thick 100cm X 30cm
-Synthetic leather 100cm X 20cm
-"Bond G17"(one of liqud glue in Japan) 100ml
-Wood glue 200ml
-Liquid super glue 5pieces
-Hot melt(glue gun) 10pieces
-Aluminum stick 2piece
-Velcro 10cm
-Elastic cord 1piece
-Cord 5m
-Flour small quantity
-Magnet 4pieces
-Reel for a name plate 1piece

[Painting materials]
1.When a undercoat is Gesso
-Gesso 100ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 100ml
-lacquer thinner 100ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
2000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Paint tools, such as a paintbrush
-Pliers

Convenient tools when you have
-Art knife PRO
-Circle cutter
-Super glue Accelerator

Work time
19hours

Spec
Weight 300g

Template data
PDF format(A4 size)1/2 PDF format(A4 size)2/2

-How to print is here.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

1/2 Completion drawing


2/2 Completion drawing


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.


-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.


Tutorial video
When you watch this video before reading this page, you can understand this page better.


How to make templates
Make Templates from "Kousakuyousi"(one of hard paper in Japan).



How to build
Cut material into the Templates form.
Cut out 10mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


-------------------------------------------------------------------------------------------------------
【10mm厚COSボードをキャラヌノで買う】


【COSボードを楽天で買う】

-------------------------------------------------------------------------------------------------------
【10mm厚コスプレボードをAmazonで買う】


【コスプレボードを楽天で買う】

-------------------------------------------------------------------------------------------------------

**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************




Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About super glue
I use general liquid super glue.

**********************************************************************


Cut material into the Templates form.
Cut out 5mm thick EVA foam.

-------------------------------------------------------------------------------------------------------
【5mm厚COSボードをキャラヌノで買う】


【COSボードを楽天で買う】

-------------------------------------------------------------------------------------------------------
【5mm厚コスプレボードをAmazonで買う】


【コスプレボードを楽天で買う】

-------------------------------------------------------------------------------------------------------

Glue with a Liquid super glue.


I finished glueing.


Cut material into the Templates form.
Cut out 2mm or 1.5mm thick EVA foam.
Glue with a Liquid super glue.

-------------------------------------------------------------------------------------------------------
【1.5mm厚COSボードをキャラヌノで買う】


【COSボードを楽天で買う】

-------------------------------------------------------------------------------------------------------
【1.5mm厚コスプレボードをAmazonで買う】


【コスプレボードを楽天で買う】

-------------------------------------------------------------------------------------------------------

Make holes on the patterns of the Templates. Mark them with a pen.


I finished marking.


Draw patterns with a Hot melt(glue gun).



Use a Reel for a name plate.


Remove unnecessary parts.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.
Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.
Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


I finished glueing.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Glue with a Liquid super glue.


Cut a thick Aluminum stick and a thin Aluminum stick.
Cut it into appropriate length with a Pliers.


You must insert the thin one in the thick one.


Glue the thick one.
Glue with a Liquid super glue.


I finished glueing.


Glue the thin one.
Glue with a Liquid super glue.


Glue only the edge. (Surrounded part by red circle)
I finished glueing.


Glue Magnet.
Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 10mm thick EVA foam.


Glue with a Liquid super glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)

←ガス充填式ライターとガスボンベを使うとお得

Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Glue with a Liquid super glue.


I finished glueing.


Cut material into the Templates form.
Cut out 3mm thick EVA foam.

-------------------------------------------------------------------------------------------------------
【3mm厚COSボードをキャラヌノで買う】


【COSボードを楽天で買う】

-------------------------------------------------------------------------------------------------------
【3mm厚コスプレボードをAmazonで買う】


【コスプレボードを楽天で買う】

-------------------------------------------------------------------------------------------------------

Dig a pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)



Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Make holes on the patterns of the Templates. Mark them with a pen.


Glue with a Liquid super glue.


Cut 2mm or 1.5mm thick EVA foam thin.


Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 10mm thick EVA foam.


Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.
Cut out 10mm thick EVA foam.


Glue with a Liquid super glue.
Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Make screw parts.
Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Make a hook.
Cut material into the Templates form.
Cut out 3mm thick EVA foam.
Cut a Aluminum stick.


Glue with a Liquid super glue.


Make a grip.
Cut material into the Templates form.
Cut out 5mm thick EVA foam.
Cut out 2mm or 1.5mm thick EVA foam.


Reinforce 2mm or 1.5mm thick EVA foam.
Glue Synthetic leather on the backside with a Liquid super glue for reinforcement.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue Velcro with "Bond G17"(one of liqud glue in Japan). Detailes are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.




Cut 2mm or 1.5mm thick EVA foam thin.


Glue with a Liquid super glue.


Make a stone.
Cut out 30mm thick Styrofoam.
Glue with Wood glue.


I finished glueing.


Shave with a Box cutter.


Mix Wood glue and Flour.


Mix Wood glue and Flour.


Paint it.


Dry it for one day.
The surface becomes like stones.


Glue Magnet.
Glue with a Liquid super glue.


Stick Masking tape on the point you don't want to paint.



Present state.


How to paint
Begin painting.
At first, paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities page】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2."Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity.
 Then you can't get it easily.
 Please use others. For example, you can substitute wood glue for it.
-You must thin it with lacquer thinner.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Tutorial video】


【Commodities page】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things
-------------------------------------------------------------------------------------------
-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.

-------------------------------------------------------------------------------------------

I use Gesso in this tutorial.


Paint Gesso twice or three times with a brush.
Dry it about 2 ~ 6 hours.


Paint black color as undercoat color with Lacquer Spray.


Paint silver Bottle lacquer paint by Drybrush painting.


Drybrush painting is easy, you can do it with a paint brush.
Read here or watch this video.


When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.


Paint Bottle lacquer paint with a paint brush.


Paint Bottle lacquer paint with a paint brush.


After painting
Glue Cord.
Glue with a Hot melt(glue gun).


Use Iron gardening stick as core.
Cut it.


Insert it.


Glue screw parts.
Glue with a Liquid super glue.


Insert it.


Glue screw parts.
Glue with a Liquid super glue.


Glue a hook.
Glue with a Liquid super glue.


Cut Elastic cord.


Glue with a Hot melt(glue gun).


I finished glueing.


Glue a grip.
Glue with a Hot melt(glue gun).


I finished glueing.


Make a belt.
Cut material into the Templates form.
Cut out 2mm or 1.5mm thick EVA foam.
Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

PUストレッチレザー 生地 無地 全52色 黄 オレンジ 赤 ピンク 青系 17色布幅130cm 50cm以上10cm単位販売
価格:176円(税込、送料別) (2019/1/23時点)


[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

ソフトエナメル 生地 無地 42色 モノトーン、ゴールド・シルバー系 全42色 布幅130cm 50cm以上10cm単位販売
価格:188円(税込、送料別) (2019/1/23時点)




I finished glueing.


Attach a buckle.
Make a hole with a Box cutter.


Glue with a Liquid super glue.


Make holes for a buckle with a Punch.

←手で押しこむだけでお手軽なタイプ←ハンマーで叩くタイプ

Glue with a Liquid super glue.


Please
I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.


















Visitor's works
おにぎりの有さん
またしてもギャクヨガさんの型紙をお借りしてMHWのスリンガーを作りました
ちゃんと動きます 下地のジェッソ以外オール100均
近所の100均は1.5mmのEVAボードしか売ってないので一部重ねまくりました
あ〜楽しかった


Return to Top page