Glues used for "EVA foam"

-Super glue & Super glue accelerator
Generally EVA foam is glued Liquid super glue.
Use liquid type.

Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well

Then you should use a following spray.
I always use this.
Watch video.

Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←420ml

About super glue
I use general liquid super glue.

Below is the movie of Instant gule Accelerator.

-Hot melt(glue gun)
Melt stick by thing like gun, and paste melted thing.

-Store:D.I.Y shop
-Price:1000Yen (about 100Yen = 1dollar)
It's sold all over the world.

-Store:D.I.Y shop
-Price:10piece 100〜200Yen (about 100Yen = 1dollar)
It's sold all over the world.


Usage is Setting stick and pulling trigger.
Then melted stick come out.
The melted stick can stick.
It can stick various thing. There are a few things which can't stick.
*There are things can't stick. Details are later.

There are various color stick. But use only Black.
It can also write pattern.

Watch this video.

*Hot melt(glue gun) is hard to paste on slippery things.
In case of that,damage surface with Box cutter. Then pasting gets well.

In case of this Synthetic leather.

Damage surface with Box cutter.

Paste. Pasting gets good, when you do this way.

-Bond G17

It's sticky liqud glue.
Don't use fire after painting until drying, because "Bond G17"burns easily. Don' use Lighter etc until drying.

There are commody in tube and commodity in can.
It's sold only in Japan.
But, there are some similar things in except japan.

1kg can
-Store:Japanse D.I.Y shop
-Price:1500Yen (about 100Yen = 1dollar)

-Store:Japanse D.I.Y shop
-Price:100Yen~ (about 100Yen = 1dollar)

Main use are below.
-Undercoat for painting EVA foam
-Paster cloths and synthetic leather to EVA foam
-Paste EVA foam cut big

Use broken piece of EVA foam like above photo in painting.

Watch this video.

About thing like BondG17.

From Joy san. Thank you!
>I've found though, that you've mentioned about not knowing an equivalent for Bond G17.
> I'd like to report that in the United Kingdom we have a product,
>that may be available elsewhere in the world, that seems to do the same as Bond G17 in terms of sealing.
>The band is Evo-Stick Impact Adhesive, and similarly, Evo-Stick Adhesive Thinner and Cleaner.
>I've tested this with near perfect success. It takes approximately 2 hours to be dry, but I have found leaving it for 4 Hours before painting works best.
>The adhesive in the UK can be purchased and general home and DIY stores for around £4.99 for a tin of 250ml,
>but smaller tubes can be brought for £2.99. They also do larger quantities as well. The cleaner is in a tin with a screw-cap, and is £3.99.
>I purchased mine in a store called Homebase.

From Bonnie san. Thank you!
>I saw the Glues used for "Lion Board" page on your website.
>From what I can read, ボンドG17 seems to be a type of ネオプレンゴム/neoprene-based glue.
>Therefore most brands of 'contact cement' available overseas should work for these tutorials.
>Here are some types I have seen in the United States.
>Scotch-Weld, made by 3M
>Weldwood Contact Cement, made by DAP
>I have used both of these to glue EVA foam.
>Your website inspired me to buy some LionBoard when I visited Japan, I like it much better than EVA foam (EVA is softer and easily damaged.)
>Thank you for posting so many wonderful tutorials!

Cleaning gate.
Riquid left around mouth after using.

In the case, use cloth.

Wipe the cloth.

It's become beautiful.

How to thin
If you want to thin, mix lacquer thinner.
Don't use thinner for plastic models.
It coagulates, if you use thinner for plastic models.
Use commodity selling in D.I.Y shop, the one such as following photo.

Please support me by donating
If my tutorials supports you, please support me.
You can donate to me from 1$ with PayPal.
I'm gonna use donation to make new props, thanks.
Click this ↓.

Thanks for donating! kurisura-san!
I'm so glad my Kimetsu tutorials helps you!
I'll keep up doing my best!

Thanks for donating! Alice-san!
I'm so glad my tutorials helps you!
I'll keep up doing my best!

Thanks for donating! maria-san!
I'll keep up my best in the future!

More history

Please subscribe and follow
Please subscribe my channel!

Please follow my twitter!

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.