My profile & Contact

Dig patterns to EVA foam

-Dig lines with soldering iron
When you dig patterns to EVA foam, use Soldering iron.
This is Soldering iron. A tipget heats when a power cord is connected.
A original use is soldering.
There are various wattage. Size of tips are different between wattage.
30wat is most generic.At first you must buy a 30wat commodity.

Use together a stand basicly when you use Soldering iron.
A sponge is for cooling. Before using Soldering iron, wet the sponge.

-Store:D.I.Y shop
-Price:1000Yen (about 100Yen = 1dollar)

-Store:D.I.Y shop
-Price:700Yen (about 100Yen = 1dollar)

Watch movie.

Gasses come out when EVA foam is melted.
You must wear a mask and You make ventilation good in the time of using.

Dig scales with Soldering iron.
(Don't breathe in the smoke and don't put in eyes)

After painting.
*How to make this example is here.

These lines are digged with Soldering iron.
*How to make this example is here.

Soldering iron having a thin tip.
This is a commodity of 23wat.
The tip is considerably thin.

It's good to dig small letters.

After painting.

If you don't have a soldering iron.
It's also good diggin with Box cutter.
But, You should be carefull about cutting too much.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Return to Top page