Dragon Quest: The Adventure of Dai
How to make maam's belt for magical gun (with templates)
*Gun tutorial is here


Tutorial video
When you watch this video before reading this page, you can understand this page better.


Materials for the belt
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5sheets

[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 30cm
-Synthetic leather 100cm X 30cm
-"Bond G17"(one of sticky glue in Japan) 200ml
-Liquid super glue 1piece
-Velcro 40cm

[Painting materials]
-

Materials cost to make the belt
1000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Circle cutter
-Super glue Accelerator

Work time to make the belt
3hours

Spec
Weight 1kg

Template data
PDF format(A4 size)

-How to print is here.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

Completion drawing


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan).



Building
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.





EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.

Introduction video




Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.






●1.5mm厚COSボードをAmazonで買う


●1.5mm厚COSボードを楽天で買う

COSボード Sサイズ(450mm×600mm) 1.5mm厚 白 価格：359円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 1.5mm厚 白 価格：672円（税込、送料別) (2019/10/23時点)

COSボード Lサイズ(900mm×1800mm) 1.5mm厚 白 価格：1681円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 1.5mm厚 黒 価格：672円（税込、送料別) (2019/10/23時点)

COSボード（シールタイプ）Mサイズ(600mm×900mm) 1.5mm厚 白 価格：1120円（税込、送料別) (2019/10/23時点)

●1.5mm厚コスプレボードをAmazonで買う


●1.5mm厚コスプレボードを楽天で買う

コスプレボード　白1.5mm×660mm×1000mm 価格：605円（税込、送料別) (2019/10/23時点)

コスプレボード　黒1.5mm×660mm×1000mm 黒だから裏塗り処理を省略出来る 価格：660円（税込、送料別) (2019/10/23時点)

コスプレボードシール　白1.5mm×660mm×500mm 接着剤不要のシール接着、装飾等に 価格：594円（税込、送料別) (2019/10/23時点)

コスプレボードシール　黒1.5mm×660mm×500mm 接着剤不要のシール接着、装飾等に 価格：682円（税込、送料別) (2019/10/23時点)

Cut out Synthetic leather.

PUストレッチレザー 生地 無地 全52色 白 黒 緑 銀系 17色 布幅130cm 50cm以上10cm単位販売 価格：179円（税込、送料別) (2019/11/10時点)

レザーストレッチニット厚手 生地 無地 計37色 赤 ピンク 黄 オレンジ 茶 紫系 20色 布幅140cm 50cm以上10cm単位販売 価格：204円（税込、送料別) (2019/11/10時点)

フェイクレザー 生地 無地 計36色 白 黒 緑 青 紫系 20色 布幅140cm 50cm以上10cm単位販売 価格：179円（税込、送料別) (2019/11/10時点)

メタルエナメル 全20色 無地 黒 白 青 紫 緑 オレンジ 赤 ピンク系 布幅135cm 50cm以上10cm単位販売 価格：204円（税込、送料別) (2019/11/10時点)

ソフトエナメル 生地 無地 42色 モノトーン、ゴールド・シルバー系 全42色 布幅130cm 50cm以上10cm単位販売 価格：191円（税込、送料別) (2019/11/10時点)

Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


I finished glueing.


Glue Velcro with "Bond G17"(one of sticky glue in Japan). Detailes are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



I finished glueing.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.
Glue with "Bond G17"(one of sticky glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



I finished glueing.


Glue with a Liquid super glue.


I finished glueing.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
Glue with "Bond G17"(one of sticky glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


Glue with "Bond G17"(one of sticky glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


I finished glueing.


Make hole with a Punch.

←手で押しこむだけでお手軽なタイプ←ハンマーで叩くタイプ

Attach Rivet with a striking stick. Details are here.


I finished attaching.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


I finished glueing.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


I finished glueing.


Make hole with a Punch.


Attach Rivet with a striking stick. Details are here.


Make hole with a Punch.


Attach Rivet with a striking stick. Details are here.


Please support me by donating
If my tutorials supports you, please support me.
You can donate to me with PayPal.
I'm gonna use donation to make new props, thanks.
Click this ↓.


Thanks for donating from donation form! Serena-san!
I'm so glad my tutorials helped you!



Thanks for donating from donation form! ray-san!
I'm so glad my Nanami's hatchet tutorial helped you!


Thanks for donating from donation form! kinrah-san!
I'm so glad my Kimetsu templates helped you!


More history

Please subscribe and follow
Please subscribe my channel!


Please follow my twitter!


Complete


Please watch the tutorial video too.
















About using for business
When you use my contents for business, follow this rule.