Additional explanation
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Size:Free size(Adjust if needed)
-Mentions of "x1","x2" etc are the numbers of sheets. (If you need both arms or both legs etc, cut the number of double.) -Mentions of "2mm" , "5mm" etc are thickness of EVA foam.
Completion image Caution Bellow photo is a image photo aftet completing. Caution Don't print bellow photo. Caution Read "How to print".
Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.
-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.
-Don't use fire near the things which are easy to burn such as paint, thinner
etc.
-When you finished using tools, pull an outlet.
-Read labels of materials and tools, and understand how to use.
Please support me
If my tutorials supported you, please support me.
-Support method 1
Please join my YouTube channel's membership.
Just ＄0.99 per month.
These are membership benefits.
-Early access of new videos
-Prioritize replying to comments
-Videos for only members
etc
-Support method 2
Please suppor me by YouTube's SUPER THNAKS.
It's the supporting function for Youtube videos.
It look like SUPER CHAT.
Click this banner.
Make the template
Make body.
Make Templates from Drawing paper.
Wrap Drawing paper to a shin and stick Packaging tape.
Cut open it. Repeat cutting and pasting.
Repeat cutting and pasting.
Cut open.
Copy to new Drawing paper and make a fair copy.
Assemble the fair copy.
When you make a ideal from, cut open it. Use it.
When you want to know how to make Templates, browse this page.
Building
Make a body.
Cut material into the Templates form.
Cut out 5mm thick EVA foam.
EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.
Introduction video
Use a sharp blade. For example, "Pro Blade".
This is so sharp. ←10枚入り ←50枚入りお得パック
Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.
↑刃はついてないので→の替え刃とセットで買うこと
●5mm厚コスプレボードを楽天で買う
送料無料の5枚セット
●5mm厚コスプレボードをAmazonで買う
●5mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)
Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)
Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.
When you use 100ml, you can make a armorset or about two, three weapons.
Glue with a Liquid super glue.
Heat it by Heat gun or Steam iron. Bend it and keep the form. (Actually I used fire, but it's dangerous method. I recommend Heat gun or Steam iron.
If accedents happens, it's self-responsibility)
Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.
Glue Cloth or Synthetic leather on points with burdens.
ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい！
Make belts.
Cut out 1.5mm or 2mm thick EVA foam. Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here. Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
チューブ入り(箱入り)の方が使い勝手はいいですが、缶入りの方がコスパは断然良いです。
Paint mixed one twice with brush. Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
However don't paint to parts made by Plastic sheets.
Dry it about 2 ~ 6 hours.
Please follow X(Twitter)
Please follow my X(twitter).
