How to make Back Plate - Trinity Blood Sister Esther - YOGA Cosplay(GyakuYoga) [Tutorial of Cosplay weapon,aromor,prop]



ツイート

Trinity Blood
Sister Esther
How to make Back Plate

Materials
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5piece
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 10cm
→5mm thick 100cm X 10cm
→10mm thick 100cm X 30cm
-Liquid super glue 5pieces
-Hot melt(glue gun) 10piece
-Safety pin 3piece
-Cord 5m

[Painting materials]
1.When undercoat is Gesso
-Gesso 50ml
-Paintbrush 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

2.When undercoat is Wood glue thinned with water
-Wood glue 50ml
-Water a little
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of sticky glue in Japan) 50ml
-lacquer thinner 50ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
1000Yen (about 130Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Paint tools (brush etc)

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Circle cutter
-Super glue Accelerator

Work time
10Hours

Spec
-

Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

-If accedents happens, it's self-responsibility. Keep safety environment.

Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.

Thanks, everybody!

Jun,17,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy your cosplay!

Jun,17,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy make your props!

More history

Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan).

There are many breks for cutting out every parts.

Building
Cut material into the Templates form.
Cut out 10mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.

EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.

Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.

↑刃はついてないので→の替え刃とセットで買うこと

●10mm厚コスプレボードを楽天で買う

●10mm厚コスプレボードをAmazonで買う

●10mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)

Cut out the innder to ring form.
Cut out with a Box cutter etc.

Slant it with Box cutter etc.
Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)

Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.

When you use 100ml, you can make a armorset or about two, three weapons.

Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
Cut out 10mm thick EVA foam.
Glue with a Liquid super glue.

●1.5mm厚コスプレボードを楽天で買う

送料無料の5枚セット

●1.5mm厚コスプレボードをAmazonで買う

●2mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)

Shave it into a mountain form with a Box cutter etc.

I finished shaving.

Glue the shaving side with a Liquid super glue.
The surface becomes round.

Cut out 1.5mm or 2mm thick EVA foam.
Glue with a Liquid super glue.

I finished glueing.
Mark pattern by penn.

Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
Heap with a Hot melt(glue gun).

ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい！

Glue a Safety pin with a Hot melt(glue gun) for equiping.
(There is also a method that use Velcro. Details are here.)

Make pricles.
Cut out 5mm thick EVA foam.

●5mm厚コスプレボードを楽天で買う

送料無料の5枚セット

●5mm厚コスプレボードをAmazonで買う

●5mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)

Glue with a Liquid super glue.

ハンダゴテで撫でてパーツのカドを落とす(臭気は吸わない事)。もしくは刃物で削ぎ落とす。
(実際には火を使って溶かしましたが、コスプレ造形用ボードに火気を使う事は安全面から非推奨です。
混乱を避けるために実際の作業写真を掲載しましたが、
作る際は安全な作業工程で代替するか、作業工程を飛ばしてください。
作業は自己責任です、安全面に最大限配慮お願い致します。)

Paste codes.
Glue with a Hot melt(glue gun).

Please follow and donate
Please follow my twitter.

Please donate me.

Painting
Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities　page】
Gesso or Black Gesso
黒いジェッソと詰替えパック

白いジェッソと詰替えパック

2.Wood glue thinned with water
This is so easy.

【Merit】
-Someone can get
-Someone can use easy

【Demerit】
-Drying time is a little long.

【Commodities　page】

3."Bond G17"(one of liqud glue in Japan)
This is dangerous method, it's most likely happening fire.
I wrote about this method as a archive,
However I don't recommend this.
I don't use this method now, I use other method now.
If accedents happens, it's self-responsibility.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Commodities　page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner