My profile & Contact	Tweet

How to make Boots


Materials
[Materials for making templates]
-Drawing paper 10piece
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 30cm
-Synthetic leather 100cm X 30cm
-"Bond G17"(one of sticky glue in Japan) 100ml
-Liquid super glue 3piece
-Hot melt(glue gun) 5pieces
-Velcro 50cm
-Shoes

[Painting materials]
-

Materials cost
4000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Paint tools, such as a paintbrush

Convenient tools when you have
-Art knife PRO
-Super glue Accelerator

Work time
25Hours

Spec
-

Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.


-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Make the template
Make Templates from Drawing paper.
When you want to know how to make Templates, browse this page.



When you make a ideal from, cut open it. Use it.


Building
Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.

PUストレッチレザー 生地 無地 全52色 白 黒 緑 銀系 17色 布幅130cm 50cm以上10cm単位販売 価格：179円（税込、送料別) (2019/11/10時点)

レザーストレッチニット厚手 生地 無地 計37色 赤 ピンク 黄 オレンジ 茶 紫系 20色 布幅140cm 50cm以上10cm単位販売 価格：204円（税込、送料別) (2019/11/10時点)

フェイクレザー 生地 無地 計36色 白 黒 緑 青 紫系 20色 布幅140cm 50cm以上10cm単位販売 価格：179円（税込、送料別) (2019/11/10時点)

メタルエナメル 全20色 無地 黒 白 青 紫 緑 オレンジ 赤 ピンク系 布幅135cm 50cm以上10cm単位販売 価格：204円（税込、送料別) (2019/11/10時点)

ソフトエナメル 生地 無地 42色 モノトーン、ゴールド・シルバー系 全42色 布幅130cm 50cm以上10cm単位販売 価格：191円（税込、送料別) (2019/11/10時点)

Inflate by putting in a towel etc and desiccate. Desiccate as this state, then it be beautiful.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************

-------------------------------------------------------------------------------------------------------
【1.5mm厚COSボードを楽天で買う】

COSボード Sサイズ(450mm×600mm) 1.5mm厚 白 価格：359円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 1.5mm厚 白 価格：672円（税込、送料別) (2019/10/23時点)

COSボード Lサイズ(900mm×1800mm) 1.5mm厚 白 価格：1681円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 1.5mm厚 黒 価格：672円（税込、送料別) (2019/10/23時点)

COSボード（シールタイプ）Mサイズ(600mm×900mm) 1.5mm厚 白 価格：1120円（税込、送料別) (2019/10/23時点)

【1.5mm厚COSボードをキャラヌノで買う】

-------------------------------------------------------------------------------------------------------
【1.5mm厚コスプレボードをAmazonで買う】


【1.5mm厚コスプレボードを楽天で買う】

コスプレボード　白1.5mm×660mm×1000mm 価格：605円（税込、送料別) (2019/10/23時点)

コスプレボード　黒1.5mm×660mm×1000mm 黒だから裏塗り処理を省略出来る 価格：660円（税込、送料別) (2019/10/23時点)

コスプレボードシール　白1.5mm×660mm×500mm 接着剤不要のシール接着、装飾等に 価格：594円（税込、送料別) (2019/10/23時点)

コスプレボードシール　黒1.5mm×660mm×500mm 接着剤不要のシール接着、装飾等に 価格：682円（税込、送料別) (2019/10/23時点)

-------------------------------------------------------------------------------------------------------

**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************

Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About super glue
I use general liquid super glue.

**********************************************************************

Glue with a Liquid super glue.


I finished glueing.


Paste with "Bond G17"(one of sticky glue in Japan).


Make a ribbon.
Make a ring form and a belt.


Bend belt to photo and let it pass.


It become ribbon,when it completed letting it pass.
Take off ring and it be compact at time of storing.


Attatch the ring with Rivet.(Shown part by red line)
Attach Rivet with a striking stick. Details are here.
Glue Velcro with "Bond G17"(one of sticky glue in Japan) or a Hot melt(glue gun). Detailes are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.




↑ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい！

Please
I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.












Return to Top page