My profile & Contact

Make boader lines to EVA foam

-Make boader lines with "Lion Board"
Make thing cutting 5mm thick EVA foam small as border.
Shave corner with Box cutter.


-------------------------------------------------------------------------------------------------------
y5mmŒ๚COSƒ{[ƒh‚๐ƒLƒƒƒ‰ƒkƒm‚ล”ƒ‚คz


yCOSƒ{[ƒh‚๐Šy“V‚ล”ƒ‚คz

-------------------------------------------------------------------------------------------------------
y5mmŒ๚ƒRƒXƒvƒŒƒ{[ƒh‚๐Amazon‚ล”ƒ‚คz


yƒRƒXƒvƒŒƒ{[ƒh‚๐Šy“V‚ล”ƒ‚คz

-------------------------------------------------------------------------------------------------------

Paste with Liquid super glue.


Toast with Lighter and remove corner.

ฉƒKƒX[“UŽฎƒ‰ƒCƒ^[‚ฦƒKƒXƒ{ƒ“ƒx‚๐Žg‚ค‚ฦ‚จ“พ

I finished toasting.


After painting.
*How to make this example is here.


-Make boader lines with Hot melt(glue gun)
Serve Hot melt(glue gun) to boaders.
It's easier than above process.


After painting. It's not beautifull than above process.
But It's good depending on the atmosphere of the work.
Use by your liking.
*How to make this example is here.


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.


-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Return to Top page