Fate/Grand Order
How to make Bunyan's chainsaw (with templates)
Watch tutorial video at first
[Fate/Grand Order]Chainsaw tutorial [How to make props]
Materials
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Packaging tape(parcel tape) 1piece
[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 20cm
→3mm thick 100cm X 10cm
→5mm thick 100cm X 30cm
→10mm thick 100cm X 60cm
-Liquid super glue 8pieces
-Hot melt(glue gun) 10pieces
-Wire 20cm
-Aluminum stick 1piece
[Painting materials]
1.When undercoat is Gesso
-Gesso 100ml
-Paintbrush 1piece
-lacquer paint(Bottle lacquer paint , Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece
2.When undercoat is Wood glue thinned with water
-Wood glue 100ml
-Water a little
-Paintbrush 1piece -Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint , Lacquer Spray etc) proper quantity*
-Masking tape 1piece
3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of sticky glue in Japan) 100ml
-lacquer thinner 100ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint , Lacquer Spray etc) proper quantity* -Masking tape 1piece
*The paiting area is written in the package, refer it. Details are here .
Materials cost
3000Yen (about 100Yen = 1dollar)
Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc (Use also a "Pro blade" and a "Blade breaker" )
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Paint tools (brush etc)
-Pinvice or Prick punch etc -Nippers
Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Circle cutter
-Super glue Accelerator
Work time
18hours
Spec
Weight 550g
Length 85cm
Template data
PDF format(A4 size)1/3 PDF format(A4 size)2/3 PDF format(A4 size)3/3
How to download & print
Read this .
Additional explanation
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue .
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam .
1/3 Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print ".
2/3 Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print ".
3/3 Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print ".
Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.
-When you dig mterials etc with Soldering iron , make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.
-Don't use fire near the things which are easy to burn such as paint, thinner
etc.
-When you finished using tools, pull an outlet.
-Read labels of materials and tools, and understand how to use.
Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.
Thanks for donation of YouTube's SUPER THANKS !
Thanks for donation ! micaelahpetersen-san!
I'm so glad my Mihawk's NIGHT tutorial helped you!
Please make it too you!
Thanks for donation ! AnyaHigure-san!
I'm so glad my works helped you!
More history
Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan) . When you want to know how to make Templates of weapons, browse this page .
Building the blade
Make a blade.
Cut material into the Templates form.
Cut out 5mm thick EVA foam .
EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.
Introduction video
VIDEO
Use a sharp blade. For example, "Pro Blade" .
This is so sharp.
←10枚入り
←50枚入りお得パック
I always use "Running fire box cutter" ,"Blade breaker" ,Cutting mat .
"Blade breaker" can break the blade easily.
Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
●5mm厚COSボードをAmazonで買う
●5mm厚COSボードを楽天で買う
●5mm厚コスプレボードをAmazonで買う
●5mm厚コスプレボードを楽天で買う
Use a Aluminum stick .
You can substitute various metalic sticks.
Cut it into appropriate length with Nippers.
Mark.
Cut out with a Box cutter etc .
Glue the Aluminum stick .
Glue with a Liquid super glue .
When you use a Super glue Accelerator , Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)
Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.
VIDEO
When you use 100ml, you can make a armorset or about two, three weapons.
←100ml ←420ml
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam .
Glue with a Liquid super glue .
●1.5mm厚COSボードをAmazonで買う
●1.5mm厚COSボードを楽天で買う
●1.5mm厚コスプレボードをAmazonで買う
●1.5mm厚コスプレボードを楽天で買う
I finished glueing.
Cut material into the Templates form.
Cut out 3mm thick EVA foam .
●3mm厚COSボードをAmazonで買う
●3mm厚COSボードを楽天で買う
●3mm厚コスプレボードをAmazonで買う
●3mm厚コスプレボードを楽天で買う
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam .
You must use a tool for cutting out a fair circle. Details are here .
Glue with a Liquid super glue .
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam .
Glue with a Liquid super glue .
Building the body
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
●10mm厚COSボードをAmazonで買う
●10mm厚COSボードを楽天で買う
●10mm厚コスプレボードをAmazonで買う
●10mm厚コスプレボードを楽天で買う
Cut out to make a hollow.
Shift the position. Glue with a Liquid super glue .
I finished glueing.
Cut unnecessary parts with a Box cutter etc .
I finished cutting.
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam .
Glue with a Liquid super glue .
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Glue with a Liquid super glue .
Glue with a Liquid super glue .
I finished glueing.
Cut material into the Templates form.
Cut out 5mm thick EVA foam .
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Glue with a Liquid super glue .
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Glue with a Liquid super glue .
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Glue with a Liquid super glue .
Present state.
Present state.
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Mark holes on the Templates .
Cut out to make a hollow.
Mark holes on the Templates .
Cut out to make a hollow.
Shift the position. Glue with a Liquid super glue .
Shift the position. Glue with a Liquid super glue .
I finished glueing.
Cut unnecessary parts with a Box cutter etc .
I finished cutting.
Cut unnecessary parts with a Box cutter etc .
I finished cutting.
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam .
Glue with a Liquid super glue .
Glue with a Liquid super glue .
Heap a Hot melt(glue gun) for reinforcement.
ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい!
Cut material into the Templates form.
Cut out 5mm thick EVA foam .
Glue with a Liquid super glue .
Building the grip
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Glue with a Liquid super glue .
Round off the corners with a Box cutter etc .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
↑ギャクヨガ愛用ライター、使いやすい! ガスがなくなったらボンベで充填しましょう
Make hole with a Pinvice or Prick punch etc.
Use a wire.
Cut it with Pliers or Nippers.
Glue with a Liquid super glue .
Make hole with a Pinvice or Prick punch etc.
Glue with a Liquid super glue .
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Glue with a Liquid super glue .
Round off the corners with a Box cutter etc .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Use a wire.
Cut it with Pliers or Nippers.
Glue with a Liquid super glue .
Glue with a Liquid super glue .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Building the circle form emblem
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam .
Present state.
Please follow and subscribe
Please follow my Facebook & twitter!
Please subscribe my channel!
Painting
Begin painting.
At first, paint undercoat on EVA foam .
The effects are as follows.
-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.
1. Gesso
This is easy.
【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint .
-There are several colors one, white black etc.
【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan) .
Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan) .
【Commodities page】
Gesso or Black Gesso
or
【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
2. Wood glue thinned with water
This is so easy.
【Merit】
-Someone can get
-Someone can use easy
【Demerit】
-Drying time is a little long.
【Commodities page】
3. "Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.
【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.
【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it
easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.
【Commodities page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner
&
-About paint
I use following paint.
You can use acrylic paint , when you use Gesso .
I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial. But this method is danger, then I don't recommend.
I recommend Gesso or Wood glue thinned with water.
Paint "Bond G17"(one of sticky glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.
Paint gray color as undercoat color with Lacquer Spray .
Paint gray color as undercoat color with Lacquer Spray .
Paint gray color as undercoat color with Lacquer Spray .
Paint white color with Lacquer Spray .
Stick Masking tape on the point you don't want to paint.
ギャクヨガは細かいところは10mm幅(左の商品)、広い所は30mm幅(右の商品)を使ってます
Paint pink with Lacquer Spray .
Paint pink with Lacquer Spray .
Stick Masking tape on the point you don't want to paint.
Paint gray with Lacquer Spray .
Paint silver with Lacquer Spray .
Stick Masking tape on the point you don't want to paint.
Paint with Lacquer Spray .
Mark holes on the Templates .
Paint black Bottle lacquer paint with a paint brush.
When you paint Bottle lacquer paint , use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel
paints after dry.),
panint stick, thinner.
Stick Masking tape on the point you don't want to paint.
Paint red color with Lacquer Spray .
Peel Masking tape softly.
Stick Masking tape on the point you don't want to paint.
Paint blue with Lacquer Spray .
Peel Masking tape softly.
Glue with a Liquid super glue .
Actually, I used a Airbrush too.
If you want to make light and shade, use it.
About Airbrush is here .
●初心者にオススメ
安価なUSB充電式エアブラシ。
これ一つでエアブラシ塗装が手軽に行えます、60分充電すれば45分稼働できます。
エアブラシ塗装を手軽に始めるならまずはこれ。
●本格的に始めるなら
Mr.カラーを作っているクレオスのエアブラシセットです。
エアブラシ塗装に必要なものが一式セットになった定番商品です。
ギャクヨガも昔使ってました。
電源はコンセント接続です。
●ギャクヨガが使っている物を使いたいなら
性能は高いですが高価です。
ホースは別途購入が必要です。
After painting Wrap plastic tape.
Complete
Please watch the tutorial video too.
VIDEO
Visitor's works
きいち さん
チェーンソーはギャクヨガ様の型紙を使わせていただきました。
サイトには型紙だけではなく詳細な作り方も掲載されていて、
初心者の自分でもここまでできて驚いています。ありがとうございました!
Please follow Twitter
About using for business
When you use my contents for business, follow this rule .