Yo-kai Gakuen Y
How to make Wildboy's gun (with templates)
Watch tutorial video at first
[Yo-kai Gakuen Y]Wildboy's gun tutorial - [Yo-kai watch JAM Yo-kai Academy Y] handgun tutorial
Materials
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 20cm
→3mm thick 100cm X 10cm
→5mm thick 100cm X 20cm
→10mm thick 100cm X 30cm
-Liquid super glue 9pieces
-Hot melt(glue gun) 10pieces
-Iron gardening stick (diameter 0.8cm) 1piece
[Painting materials]
1.When undercoat is Gesso
-Gesso 50ml
-Paintbrush 1piece
-lacquer paint(Bottle lacquer paint , Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece
2.When undercoat is Wood glue thinned with water
-Wood glue 50ml
-Water a little
-Paintbrush 1piece -Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint , Lacquer Spray etc) proper quantity*
-Masking tape 1piece
3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of sticky glue in Japan) 50ml
-lacquer thinner 50ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint , Lacquer Spray etc) proper quantity*
-Masking tape 1piece
*The paiting area is written in the package, refer it. Details are here .
Materials cost
2500Yen (about 100Yen = 1dollar)
Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc (Use also a "Pro blade" and a "Blade breaker" )
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Paint tools (brush etc) -Compass cutter -Tools to cut Iron gardening stick(Freeway coping saw , Nippers, etc)
Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Circle cutter
-Super glue Accelerator
Work time
23hours
Spec
Weight 180g
Length 35cm
Template data
PDF format(A4 size)
How to download & print
Read this .
Additional explanation
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue .
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam .
Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print ".
Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.
-When you dig mterials etc with Soldering iron , make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.
-Don't use fire near the things which are easy to burn such as paint, thinner
etc.
-When you finished using tools, pull an outlet.
-Read labels of materials and tools, and understand how to use.
Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.
Thanks for donation of YouTube's SUPER THANKS !
Thanks for donation ! micaelahpetersen-san!
I'm so glad my Mihawk's NIGHT tutorial helped you!
Please make it too you!
Thanks for donation ! AnyaHigure-san!
I'm so glad my works helped you!
More history
Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan) .
When you want to know how to make Templates of weapons, browse this page .
Building the lower flame
Cut material into the Templates form.
Cut out 5mm thick EVA foam .
Cut out 10mm thick EVA foam .
EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.
Introduction video
VIDEO
Use a sharp blade. For example, "Pro Blade" .
This is so sharp.
←10枚入り
←50枚入りお得パック
I always use "Running fire box cutter" ,"Blade breaker" ,Cutting mat .
"Blade breaker" can break the blade easily.
Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
●5mm厚COSボードをAmazonで買う
●5mm厚COSボードを楽天で買う
●5mm厚コスプレボードをAmazonで買う
●5mm厚コスプレボードを楽天で買う
●10mm厚COSボードをAmazonで買う
●10mm厚COSボードを楽天で買う
●10mm厚コスプレボードをAmazonで買う
●10mm厚コスプレボードを楽天で買う
Glue with a Liquid super glue .
When you use a Super glue Accelerator , Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)
Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.
VIDEO
When you use 100ml, you can make a armorset or about two, three weapons.
←100ml ←420ml
Glue with a Liquid super glue .
I finished glueing.
Cut out 1.5mm or 2mm thick EVA foam .
●1.5mm厚COSボードをAmazonで買う
●1.5mm厚COSボードを楽天で買う
●1.5mm厚コスプレボードをAmazonで買う
●1.5mm厚コスプレボードを楽天で買う
Glue with a Liquid super glue .
I finished glueing.
Cut unnecessary parts with a Box cutter etc .
I finished cutting.
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Glue with a Liquid super glue .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
↑ギャクヨガ愛用ライター、使いやすい! ガスがなくなったらボンベで充填しましょう
Building the upper flame
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Glue with a Liquid super glue .
I finished glueing.
Round off the corners with a Box cutter etc .
Cut out 1.5mm or 2mm thick EVA foam .
Glue with a Liquid super glue .
Cut unnecessary parts with a Box cutter etc .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Cut material into the Templates form.
Cut out 5mm thick EVA foam .
Round off the corners with a Box cutter etc .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Cut out 1.5mm or 2mm thick EVA foam .
Cut out with a Punch .
Glue with a Liquid super glue .
I finished glueing.
Glue with a Liquid super glue .
I finished glueing.
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Glue with a Liquid super glue .
Cut out 1.5mm or 2mm thick EVA foam .
Glue with a Liquid super glue .
I finished glueing.
Cut unnecessary parts with a Box cutter etc .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Glue with a Liquid super glue .
I finished glueing.
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
You must use a tool for cutting out a fair circle. Details are here .
Form by shaving with a Box cutter etc .
I finished shaving.
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Cut material into the Templates form.
Cut out 5mm thick EVA foam .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Glue with a Liquid super glue .
I finished glueing.
Building the cylinder
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Glue with a Liquid super glue .
Cut material into the Templates form.
Cut out 10mm thick EVA foam .
Shave it into a mountain form with a Box cutter etc .
Bend with a Lighter while pushing the shaving side.
Bend with a Lighter while pushing the shaving side.
I finished bending.
Glue with a Liquid super glue .
I finished glueing.
Cut unnecessary parts with a Box cutter etc .
Cut material into the Templates form.
Cut out 3mm thick EVA foam .
Glue with a Liquid super glue .
●3mm厚COSボードをAmazonで買う
●3mm厚COSボードを楽天で買う
●3mm厚コスプレボードをAmazonで買う
●3mm厚コスプレボードを楽天で買う
I finished glueing.
Cut unnecessary parts with a Box cutter etc .
I finished cutting.
Carve the pattern with a Soldering iron .(Don't breathe in the smoke and don't put in eyes)
ギャクヨガが使っているハンダゴテです、コテ台付き。
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Building the barrel
Cut material into the Templates form.
Cut out 3mm thick EVA foam .
Glue with a Liquid super glue .
Glue with a Liquid super glue .
I finished glueing.
Cut material into the Templates form.
Cut out 5mm thick EVA foam .
Glue with a Liquid super glue .
I finished glueing.
Cut material into the Templates form.
Cut out 3mm thick EVA foam .
Cut out to make a hollow.
Shift the position. Glue with a Liquid super glue .
Glue with a Liquid super glue .
I finished glueing.
Glue with a Liquid super glue .
I finished glueing.
Use a Iron gardening stick (diameter 0.8cm).
Use it as a core.
Cut it wit Freeway coping saw , pliers, nippers, diamond files, etc.
This stick is just a iron stick.
You can substitute various metalic sticks.
園芸用の棒は一応Amazonでも売ってるが異常に高い、ホームセンターや100均で買った方が良い。
I finished cutting.
Glue with a Liquid super glue .
Cut material into the Templates form.
Cut out 3mm thick EVA foam .
Glue with a Liquid super glue .
I finished glueing.
Present state.
Please follow and subscribe
Please follow my Facebook & twitter!
Please subscribe my channel!
Painting
Glue a broken piece of material. Hold it in painting.
(Cut it off after painting.)
ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい!
Begin painting.
At first, paint undercoat on EVA foam .
The effects are as follows.
-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.
1. Gesso
This is easy.
【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint .
-There are several colors one, white black etc.
【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan) .
Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan) .
【Commodities page】
Gesso or Black Gesso
or
【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
2. Wood glue thinned with water
This is so easy.
【Merit】
-Someone can get
-Someone can use easy
【Demerit】
-Drying time is a little long.
【Commodities page】
3. "Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.
【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.
【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it
easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.
【Commodities page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner
&
-About paint
I use following paint.
You can use acrylic paint , when you use Gesso .
I use "Zoukei be-su" as undercoat this time.
But it's sold only in Japan.
Substitute Gesso or Wood glue thinned with water.
Paint "Zoukei be-su" twice with a brush.
Dry it about 2 ~ 6 hours.
Dry it about 2 ~ 6 hours.
Paint gray as undercoat color with Lacquer Spray .
Paint gray as undercoat color with Lacquer Spray .
Paint gray as undercoat color with Lacquer Spray .
Paint gray as undercoat color with Lacquer Spray .
Paint white with Lacquer Spray .
Paint white as undercoat color with Lacquer Spray .
Paint white with Lacquer Spray .
Stick Masking tape on the point you don't want to paint.
ギャクヨガは細かいところは10mm幅(左の商品)、広い所は30mm幅(右の商品)を使ってます
Paint white as undercoat color with Lacquer Spray .
Stick Masking tape on the point you don't want to paint.
Paint dark gray with Lacquer Spray .
Stick Masking tape on the point you don't want to paint.
Paint dark gray with Lacquer Spray .
Paint yellow with Lacquer Spray .
Paint yellow with Lacquer Spray .
Process Masking tape .
Stick Masking tape on a Cutting mat .
Cut out with a Compass cutter.
Stick Masking tape on the point you don't want to paint.
I finished sticking.
Paint green with Lacquer Spray .
Cut out with a Compass cutter.
Stick Masking tape on the point you don't want to paint.
I finished sticking.
Mark the foarm with the Templates .
Stick Masking tape on the point you don't want to paint.
Paint black with Lacquer Spray .
Peel Masking tape softly.
Paint it with a Magic Marker.
Actually, I used a Airbrush too.
If you want to make light and shade, use it.
About Airbrush is here .
●初心者にオススメ
安価なUSB充電式エアブラシ。
これ一つでエアブラシ塗装が手軽に行えます、60分充電すれば45分稼働できます。
エアブラシ塗装を手軽に始めるならまずはこれ。
●本格的に始めるなら
Mr.カラーを作っているクレオスのエアブラシセットです。
エアブラシ塗装に必要なものが一式セットになった定番商品です。
ギャクヨガも昔使ってました。
電源はコンセント接続です。
●ギャクヨガが使っている物を使いたいなら
性能は高いですが高価です。
ホースは別途購入が必要です。
After painting Glue with a Liquid super glue .
Glue with a Liquid super glue .
I finished glueing.
Glue with a Liquid super glue .
I finished glueing.
Complete
Please watch the tutorial video too.
VIDEO
Please follow Twitter
About using for business
When you use my contents for business, follow this rule .