Monster Hunter series
"Yukumono Soubi"
How to make Woven hat



Materials
[Materials for making templates]
-Drawing paper 10piece
-"Kousakuyousi"(one of hard paper in Japan) 5piece
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→5mm thick 100cm X 150cm
-Synthetic leather 100cm X 50cm
-Cloth 100cm X 100cm
-Liquid super glue 5pieces
-Hot melt(glue gun) 10piece
-"Jiyujizai"(one of wire in Japan) 50cm
-Velcro 50cm
-Cord 5m

[Painting materials]
1.When undercoat is Gesso
-Gesso 50ml
-Paintbrush 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

2.When undercoat is Wood glue thinned with water
-Wood glue 50ml
-Water a little
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of sticky glue in Japan) 50ml
-lacquer thinner 50ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
2000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Paint tools (brush etc)
-Pinvice or Prick punch etc

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator

Work time
24Hours

Spec
-

Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan).
When you want to know how to make Templates, browse this page.



When you make a ideal from, cut open it. Use it.


Please support me by donating
If my tutorials supports you, please support me.
You can donate to me with PayPal.
I'm gonna use donation to make new props, thanks.
Click this ↓.


Thanks for donating from donation form! xxCatnip-san!
I'm so glad my Longinus tutorial helped you!


Thanks for donating from donation form! killercredo-san!
I'm so glad my Tengen utorial helped you!


Thanks for donating from donation form! Talengard-san!
I'm so glad my tutorials helped you!
Please enjoy cosplay of Jujutsu Kainsen(*^^*)


More history

Building
Cut material into the Templates form.
Cut out 5mm thick EVA foam.




EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.

Introduction video





コスプレ造形向けボードはネット通販で手軽に買えます。
ちなみに、COSボードとコスプレボードの違いは特にないと感じます、お好みでどうぞ。

●5mm厚COSボードをAmazonで買う


●5mm厚COSボードを楽天で買う

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Sサイズ(450mm×600mm) 5mm厚 白
価格:583円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Mサイズ(600mm×900mm) 5mm厚 白
価格:1120円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Lサイズ(900mm×1800mm) 5mm厚 白
価格:3249円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Sサイズ(450mm×600mm) 5mm厚 黒
価格:650円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Mサイズ(600mm×900mm) 5mm厚 黒
価格:1344円(税込、送料別) (2019/10/23時点)

●5mm厚コスプレボードをAmazonで買う


●5mm厚コスプレボードを楽天で買う

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

コスプレボード 白5mm×660mm×500mm
価格:517円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

コスプレボード 白5mm×660mm×1000mm
価格:990円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

コスプレボード 白5mm×1000mm×2000mm
価格:3564円(税込、送料別) (2019/10/23時点)





Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.



Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)





Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←420ml

About super glue
I use general liquid super glue.



Glue with a Liquid super glue.


Glue with a Liquid super glue.


Mark pattern by penn.


Mark pattern by penn.


Carve the pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)


ギャクヨガが使っているハンダゴテです、コテ台付き。

Make top parts.
Cut out 5mm thick EVA foam.


Glue with a Liquid super glue.


Please subscribe and follow
Please subscribe my channel!


Please follow my twitter!


Painting
Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.


1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities page】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or

2.Wood glue thinned with water
This is so easy.

【Merit】
-Someone can get
-Someone can use easy

【Demerit】
-Drying time is a little long.

【Commodities page】


3."Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity.
 Then you can't get it easily.
 Please use others. For example, you can substitute wood glue for it.
-You must thin it with lacquer thinner.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Tutorial video】


【Commodities page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner
&

-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.



I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial. But this method is danger, then I don't recommend.
I recommend Gesso or Wood glue thinned with water.


Paint "Bond G17"(one of sticky glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Paint gray color as undercoat color with Lacquer Spray.


Paint ocher color with Lacquer Spray.


After painting
Paste cloth together with "Bond G17"(one of sticky glue in Japan).



Paste cloth together with "Bond G17"(one of sticky glue in Japan).


Paste cloth together with "Bond G17"(one of sticky glue in Japan).


Paste cloth together with "Bond G17"(one of sticky glue in Japan).


Glue Velcro with "Bond G17"(one of sticky glue in Japan) or a Hot melt(glue gun). Detailes are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.




ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい!

Stick inner side too.
Glue Velcro with "Bond G17"(one of sticky glue in Japan) or a Hot melt(glue gun).








Cut Synthetic leather to cord loop form.
Glue with a Hot melt(glue gun).
Let codes pass to the cord loop.
(Length of cord can change by changing position of tie when it do it In this way.)


Equipping state.


Tie up and undo for fitting cord of neck.


Make a feather.
A feather is real one.
Use a "Jiyujizai"(one of wire in Japan) of diameter 3.2mm.
Use a "Jiyujizai"(one of wire in Japan) as a core.
Glue with a Liquid super glue.

←様々な太さ有り

Paint blue with Lacquer Spray.


I finished painting.


Make hole with a Pinvice or Prick punch etc.
Stick the feather.



Bend "Jiyujizai"(one of wire in Japan) at inner for prevention falling out.


Complete
















About using for business
When you use my contents for business, follow this rule.