My profile & Contact

Attack on titan(shingeki no kyojin)
How to make "3d maneuver gear"(Rittai kidou souti) (with templates)
Comic version
Painting part



Return to Vol.3 (tank and anchor part)

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.


-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to paint
Stick Masking tape on the point you don't want to paint.



Stick Masking tape on the point you don't want to paint.


Stick Masking tape on the point you don't want to paint.


Stick Masking tape on the point you don't want to paint.


How to paint
Begin painting.
At first, paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities page】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2."Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity.
 Then you can't get it easily.
 Please use others. For example, you can substitute wood glue for it.
-You must thin it with lacquer thinner.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Tutorial video】


【Commodities page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner
-for big things -for small things
-------------------------------------------------------------------------------------------
-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.

-------------------------------------------------------------------------------------------

I use Gesso in this tutorial.


Paint Gesso twice or three times with a brush.
Dry it about 2 ~ 6 hours.


Dry it about 2 ~ 6 hours.


Dry it about 2 ~ 6 hours.


Dry it about 2 ~ 6 hours.


Paint black color as undercoat color with Lacquer Spray.


Paint black color as undercoat color with Lacquer Spray.


Paint black color as undercoat color with Lacquer Spray.


Paint black color as undercoat color with Lacquer Spray.


Paint silver with Lacquer Spray.


Paint silver with Lacquer Spray.


Paint silver with Lacquer Spray.


Paint silver Bottle lacquer paint with a paint brush.


When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.



Paint silver Bottle lacquer paint with a paint brush.


Paint Bottle lacquer paint with a paint brush.


Paint Bottle lacquer paint with a paint brush.


*if you made the blade by [Vol.1 Easy method]
Draw lines with a Magic Marker.


I finished drawing.


After painting
[bonus tutorial vol.1 Fit the rotating fan into the tank]
Use a mini electric fan.


Cut cumbersome parts with a saw.


Fan is small, then become big.
Cut silver tapes to fan foam.


Stick the taples on original fan.


Cut material into the Templates form.
Cut out 10mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.
Make the hole put in the electric fan.

Pattern paper of this part.

PDF format (A4size) JPG format
Click Click



-------------------------------------------------------------------------------------------------------
【10mm厚COSボードを楽天で買う】

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Sサイズ(450mm×600mm) 10mm厚 白
価格:986円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Mサイズ(600mm×900mm) 10mm厚 白
価格:1849円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Lサイズ(900mm×1800mm) 10mm厚 白
価格:6274円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Sサイズ(450mm×600mm) 10mm厚 黒
価格:1232円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Mサイズ(600mm×900mm) 10mm厚 黒
価格:2353円(税込、送料別) (2019/10/23時点)

【10mm厚COSボードをキャラヌノで買う】

-------------------------------------------------------------------------------------------------------
【10mm厚コスプレボードをAmazonで買う】


【10mm厚コスプレボードを楽天で買う】

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

コスプレボード 白10mm×660mm×500mm
価格:880円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

コスプレボード 白10mm×660mm×1000mm
価格:1540円(税込、送料別) (2019/10/23時点)

-------------------------------------------------------------------------------------------------------



Paste the cut parts into the tank.
Glue with a Liquid super glue.

Don't paste the rid, then make a structure that the rid can put on and take off.
Make a difference in level for preventing that the rid fall out inside of tank.

Cut out 1.5mm or 2mm thick EVA foam.
Glue with a Liquid super glue.


-------------------------------------------------------------------------------------------------------
【1.5mm厚COSボードを楽天で買う】

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Sサイズ(450mm×600mm) 1.5mm厚 白
価格:359円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Mサイズ(600mm×900mm) 1.5mm厚 白
価格:672円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Lサイズ(900mm×1800mm) 1.5mm厚 白
価格:1681円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Mサイズ(600mm×900mm) 1.5mm厚 黒
価格:672円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード(シールタイプ)Mサイズ(600mm×900mm) 1.5mm厚 白
価格:1120円(税込、送料別) (2019/10/23時点)

【1.5mm厚COSボードをキャラヌノで買う】

-------------------------------------------------------------------------------------------------------
【1.5mm厚コスプレボードをAmazonで買う】


【1.5mm厚コスプレボードを楽天で買う】

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

コスプレボード 白1.5mm×660mm×1000mm
価格:605円(税込、送料別) (2019/10/23時点)

-------------------------------------------------------------------------------------------------------

I finished glueing.


Put the electric fan in the hole.


Switch on, adn fan rotate.


[bonus tutorial vol.2 Fit the hook for anchor]
Use a reel for a name plate.


Cut cumbersome parts.


Cut it into appropriate length.


Paste the tip of reel.
Glue with a Liquid super glue.


**********************************************************************


Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About super glue
I use general liquid super glue.

**********************************************************************


Cut out 0.5mm thick Plastic sheets.



Use a wire.
Cut it with Pliers.
Psate together "Black instant glue(one of instant glue in Japan).



Psate together "Black instant glue(one of instant glue in Japan).


Make a break.


Glue with a Liquid super glue.
Pass the hook through a hole.


Glue with a Hot melt(glue gun).


↑ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい!

Pull.


The hook go back when the hand is released.


Watch belt and wasit cloth part

Please
I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.






























Return to Top page