EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video




Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.

●10mm厚コスプレボードを楽天で買う

コスプレボード 白10mm×660mm×500mm 価格：880円（税込、送料別) (2019/10/23時点)

コスプレボード　白10mm×660mm×1000mm 価格：1540円（税込、送料別) (2019/10/23時点)

コスプレボード　黒10mm×660mm×1000mm 黒だから裏塗り処理を省略出来る 価格：2486円（税込、送料別) (2019/10/23時点)

●10mm厚コスプレボードをAmazonで買う

COSボード匠 Sサイズ 10mm厚 白 価格：1,400円（税込、送料別) (2023/5/25時点)

COSボード匠 Mサイズ 10mm厚 白 価格：2,490円（税込、送料別) (2023/5/25時点)

COSボード匠 Sサイズ 10mm厚 黒 価格：1,400円（税込、送料別) (2023/5/25時点)

COSボード匠 Mサイズ 10mm厚 黒 価格：2,490円（税込、送料別) (2023/5/25時点)

Heat it by Heat gun or Steam iron. Bend it and keep the form.
(Actually I used fire, but it's dangerous method. I recommend Heat gun or Steam iron.
If accedents happens, it's self-responsibility)




Make plural pileuses.
Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)






Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.


When you use 100ml, you can make a armorset or about two, three weapons.
←100ml ←420ml


Make more plural pileuses.
Glue with a Liquid super glue.


Make teeth.
Cut out 10mm thick EVA foam.
Glue with a Liquid super glue.


Form by shaving with a Box cutter etc.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)


Form by shaving with a Box cutter etc.


Carve the pattern with a Soldering iron.
(Don't breathe in the smoke and don't put in eyes. If accedents happens, it's self-responsibility.)


ギャクヨガが使っているハンダゴテです、コテ台付き。

Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)



I finished making it smooth.


Make spcae to put a nose in and cheek pad.
Cut out 10mm thick EVA foam.
Glue with a Liquid super glue.
Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.
Glue Cloth or Synthetic leather on points with burdens.


ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい！

Cut a Elastic cord.


Glue a Elastic cord.
Glue with a Hot melt(glue gun).


Make pileuses for a wig.
Make them like above process.


Make them like above process.


Make them like above process.


Stick Masking tape on the point you don't want to paint.


ギャクヨガは細かいところは10mm幅(左の商品)、広い所は30mm幅(右の商品)を使ってます


Please follow and subscribe
Please follow my Facebook & twitter!


Please subscribe my channel!


Painting
Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.


1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities　page】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or

2.Wood glue thinned with water
This is so easy.

【Merit】
-Someone can get
-Someone can use easy

【Demerit】
-Drying time is a little long.

【Commodities　page】


3."Bond G17"(one of liqud glue in Japan)
This is dangerous method, it's most likely happening fire.
I wrote about this method as a archive,
However I don't recommend this.
I don't use this method now, I use other method now.
If accedents happens, it's self-responsibility.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Commodities　page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner
&

-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.


・About mask
In spray painting or lacquer painting, use a mask for painting.
↑フィルタ付きセット商品 ←替えフィルタ


I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial.
But this method is danger, then I don't recommend.
If accedents happens, it's self-responsibility.
I recommend Gesso or Wood glue thinned with water.


Paint "Bond G17"(one of sticky glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Dry it about 2 ~ 6 hours.


Paint thin gray color as undercoat color with Lacquer Spray.


Paint thin gray color as undercoat color with Lacquer Spray.


Paint thin yellow color of Bottle lacquer paint with a Airbrush.





●初心者にオススメ
安価なUSB充電式エアブラシ。
これ一つでエアブラシ塗装が手軽に行えます。
エアブラシ塗装を手軽に始めるならまずはこれ。


●本格的に始めるなら
Mr.カラーを作っているクレオスのエアブラシセットです。
エアブラシ塗装に必要なものが一式セットになった定番商品です。
ギャクヨガも昔使ってました。
電源はコンセント接続です。



●ギャクヨガが使っている物を使いたいなら
性能は高いですが高価です。
ホースは別途購入が必要です。



Paint orange color of Bottle lacquer paint with a Airbrush.


Paint brown color of Bottle lacquer paint with a Airbrush.


Paint red color of Bottle lacquer paint with a paint brush.


Paint black color of Bottle lacquer paint with a Airbrush.


After painting
Glue pileuses for the wig.
Glue with a Hot melt(glue gun).


Toast with Lighter and make hair curl.
(Don't breathe in the smoke and don't put in eyes. If accedents happens, it's self-responsibility.)


Dirth clothes.
Paint black with Lacquer Spray.


Paint black with Lacquer Spray.


I finished painting.


Paint red color with Lacquer Spray.


make hem be frayed with Sand paper(180grit).


Complete







I joined interview movie in Official site of The Last Of Us.
















Visitor's works
ぴえーるさん
ギャクヨガ様のサイトを使用させて頂いてクリッカーの頭を作らせていただきました。
エアブラシを持ってないためかなりアレンジをしてしまいました。
グロテスクな面が多いですが個人的には満足です。ありがとうございました！！


Please follow Twitter
Tweets by gyakuyoga

About using for business
When you use my contents for business, follow this rule.