My profile & Contact	Tweet

Monster Hunter
Gore Magala set
How to make shin armor (with templates)


Materials
[Materials for making templates]
-Drawing paper 10sheets
-Scotch tape(Sellotape) 1piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→5mm thick 100cm X 50cm
-Synthetic leather for the mantle 100cm X 30cm
-Fur 10cmm X 30cm
-"Bond G17"(one of sticky glue in Japan) 100ml
-Wood glue 100ml
-Liquid super glue 5pieces
-Hot melt(glue gun) 10pieces
-Zipper 2pieces
-Flour one bag

[Painting materials]
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
2000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Paint tools, such as a paintbrush

Convenient tools when you have
-Art knife PRO
-Gas toach
-Heat gun
-Super glue Accelerator

Work time
18hours

Spec
-

Template data
PDF format(A4 size)

-How to print is here.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Size:Free size
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

Completion drawing


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.


-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.


Tutorial video
When you watch this video before reading this page, you can understand this page better.


Make the template
Make Templates from Drawing paper.
When you want to know how to make Templates, browse this page.



Cut open.
Copy to new Drawing paper and make a fair copy.


Assemble the fair copy.


When you make a ideal from, cut open it. Use it.


Building
Cut material into the Templates form.
Cut out 5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************

-------------------------------------------------------------------------------------------------------
【5mm厚COSボードを楽天で買う】

COSボード Sサイズ(450mm×600mm) 5mm厚 白 価格：583円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 5mm厚 白 価格：1120円（税込、送料別) (2019/10/23時点)

COSボード Lサイズ(900mm×1800mm) 5mm厚 白 価格：3249円（税込、送料別) (2019/10/23時点)

COSボード Sサイズ(450mm×600mm) 5mm厚 黒 価格：650円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 5mm厚 黒 価格：1344円（税込、送料別) (2019/10/23時点)

【5mm厚COSボードをキャラヌノで買う】

-------------------------------------------------------------------------------------------------------
【5mm厚コスプレボードをAmazonで買う】


【5mm厚コスプレボードを楽天で買う】

コスプレボード 白5mm×660mm×500mm 価格：517円（税込、送料別) (2019/10/23時点)

コスプレボード 白5mm×660mm×1000mm 価格：990円（税込、送料別) (2019/10/23時点)

コスプレボード　白5mm×1000mm×2000mm 価格：3564円（税込、送料別) (2019/10/23時点)

コスプレボード　黒5mm×660mm×1000mm 黒だから裏塗り処理を省略出来る 価格：1320円（税込、送料別) (2019/10/23時点)

コスプレボード　黒5mm×1000mm×2000mm 黒だから裏塗り処理を省略出来る 価格：4180円（税込、送料別) (2019/10/23時点)

-------------------------------------------------------------------------------------------------------

**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************

Make holes on the patterns of the Templates. Mark them with a pen.


I finished marking.


Cut it into slant with a Box cutter.


Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About super glue
I use general liquid super glue.

**********************************************************************

Cut out for making a hollow.


Shift the position. Glue with a Liquid super glue.


Shift the position. Glue with a Liquid super glue.


The hollow was made.


Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.


↑ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい！

Bend by heating with a Gas toach or a Lighter or a Heat gun.(Be careful about fire)
(When the area is large, using Gas toach is easier.)



↑ギャクヨガ愛用ライター、使いやすい！ ガスがなくなったらボンベで充填しましょう


I finished bending.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Glue with a Liquid super glue.


Bend by heating with a Gas toach or a Lighter or a Heat gun.(Be careful about fire)
(When the area is large, using Gas toach is easier.)


I finished bending.


Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.


Glue with a Liquid super glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke, be careful about fire)


Cut a Zipper.


Lock the edge with a Liquid super glue.


Glue with a Hot melt(glue gun).


Make rivets with a Hot melt(glue gun).


Present state.


Mix Wood glue and Flour.



Paint mixed one.
Dry it for one day.
The surface becomes rough.


Painting
Begin painting.
Paint gray color as undercoat color with Lacquer Spray.


Paint purple with Lacquer Spray.


Stick Masking tape on the point you don't want to paint.



Paint dark purple with Lacquer Spray.


Actually, I used a Airbrush too.
If you want to make light and shade, use it.
About Airbrush is here.

←私が使っているエアブラシとコンプレッサー

After painting
Cut out Synthetic leather.

PUストレッチレザー 生地 無地 全52色 白 黒 緑 銀系 17色 布幅130cm 50cm以上10cm単位販売 価格：179円（税込、送料別) (2019/11/10時点)

レザーストレッチニット厚手 生地 無地 計37色 赤 ピンク 黄 オレンジ 茶 紫系 20色 布幅140cm 50cm以上10cm単位販売 価格：204円（税込、送料別) (2019/11/10時点)

フェイクレザー 生地 無地 計36色 白 黒 緑 青 紫系 20色 布幅140cm 50cm以上10cm単位販売 価格：179円（税込、送料別) (2019/11/10時点)

メタルエナメル 全20色 無地 黒 白 青 紫 緑 オレンジ 赤 ピンク系 布幅135cm 50cm以上10cm単位販売 価格：204円（税込、送料別) (2019/11/10時点)

ソフトエナメル 生地 無地 42色 モノトーン、ゴールド・シルバー系 全42色 布幅130cm 50cm以上10cm単位販売 価格：191円（税込、送料別) (2019/11/10時点)

Glue it on Fur.
Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



I finished glueing.

フェイクファー 全4色 無地 黒 白 茶系 布幅150cm 50cm以上10cm単位販売 価格：199円（税込、送料別) (2018/4/6時点)

Cut out with a Box cutter.


Glue with a Hot melt(glue gun).


I finished glueing.


Please
I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.
















Return to Top page