Additional explanation
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Size:Free size
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.
Completion image Caution Bellow photo is a image photo aftet completing. Caution Don't print bellow photo. Caution Read "How to print".
Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.
-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.
-Don't use fire near the things which are easy to burn such as paint, thinner
etc.
-When you finished using tools, pull an outlet.
-Read labels of materials and tools, and understand how to use.
Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.
Make the template
Make Templates from Drawing paper.
When you want to know how to make Templates, browse this page.
When you make Templates of the head, use a mannequin head.
Repeat cutting and pasting.
Repeat cutting and pasting.
Repeat cutting and pasting.
Repeat cutting and pasting.
When you make a ideal from, cut open it. Use it.
Building
Cut material into the Templates form.
Cut out 5mm thick EVA foam.
EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.
Introduction video
Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り
←50枚入りお得パック
Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.
Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)
Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.
When you use 100ml, you can make a armorset or about two, three weapons.
←100ml ←420ml
Heat a swelling with a Heat gun, and press by a finger.
The swelling becomes flat.(Don't breathe in the smoke, be careful about fire)
(Actually I used fire, but it's dangerous method. I recommend Heat gun or Steam iron.
If accedents happens, it's self-responsibility)
Heat a swelling with a Heat gun, and press by a finger.
The swelling becomes flat.(Don't breathe in the smoke, be careful about fire)
(Actually I used fire, but it's dangerous method. I recommend Heat gun or Steam iron.
If accedents happens, it's self-responsibility)
Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.
ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい!
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
Glue Synthetic leather on the backside with a "Bond G17"(one of sticky glue in Japan) for reinforcement. Detailed process is here. Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
Form by shaving with a Box cutter etc.
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)