Trinity Blood
Abel Nightroad(ROM volume 7 version)
How to make Breast protector



Materials
[Materials for making templates]
-Drawing paper 10piece
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 50cm
-Synthetic leather 100cm X 50cm
-"Bond G17"(one of sticky glue in Japan) 100ml
-Liquid super glue 5pieces
-Hot melt(glue gun) 10piece
-Belt 1piece

[Painting materials]
-

Materials cost
1000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Tool set required for rivet

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator

Work time
10Hours

Spec
-

Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Make the template
Make Templates from Drawing paper.



Please support me by donating
If my tutorials supports you, please support me.
You can donate to me with PayPal.
I'm gonna use donation to make new props, thanks.
Click this ↓.


Thanks for donating from donation form! xxCatnip-san!
I'm so glad my Longinus tutorial helped you!


Thanks for donating from donation form! killercredo-san!
I'm so glad my Tengen utorial helped you!


Thanks for donating from donation form! Talengard-san!
I'm so glad my tutorials helped you!
Please enjoy cosplay of Jujutsu Kainsen(*^^*)


More history

Building
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.



EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.

Introduction video





コスプレ造形向けボードはネット通販で手軽に買えます。
ちなみに、COSボードとコスプレボードの違いは特にないと感じます、好みでどうぞ。

●1.5mm厚COSボードをAmazonで買う


●1.5mm厚COSボードを楽天で買う

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Sサイズ(450mm×600mm) 1.5mm厚 白
価格:359円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Mサイズ(600mm×900mm) 1.5mm厚 白
価格:672円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Lサイズ(900mm×1800mm) 1.5mm厚 白
価格:1681円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Mサイズ(600mm×900mm) 1.5mm厚 黒
価格:672円(税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード(シールタイプ)Mサイズ(600mm×900mm) 1.5mm厚 白
価格:1120円(税込、送料別) (2019/10/23時点)

●1.5mm厚コスプレボードをAmazonで買う


●1.5mm厚コスプレボードを楽天で買う

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

コスプレボード 白1.5mm×660mm×1000mm
価格:605円(税込、送料別) (2019/10/23時点)





Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.



Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.










I finished glueing.


Paste cords as boader.
Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)





Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←420ml

About super glue
I use general liquid super glue.



Attach Rivet with a striking stick. Details are here.


Glue Velcro with "Bond G17"(one of sticky glue in Japan) or a Hot melt(glue gun). Detailes are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.




ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい!

Make belts.
Cut out 1.5mm or 2mm thick EVA foam.
Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



I finished glueing.


Attach a buckle.
Attach Eyelet with a Eyelet punch. Detailes are here.


I finished attaching.


Make gold parts.
Cut out 1.5mm or 2mm thick EVA foam.
Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
Glue with a Liquid super glue.


Heap a Hot melt(glue gun) for reinforcement.


Attach belts.
Attach Rivet with a striking stick. Details are here.

Please subscribe and follow
Please subscribe my channel!


Please follow my twitter!


Complete








The red circle is the parts which I made in this time.


About using for business
When you use my contents for business, follow this rule.