How to make fate like chalice
Materials
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece
[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 40cm
→5mm thick 100cm X 70cm
→10mm thick 100cm X 60cm
-"Bond G17"(one of sticky glue in Japan) 100ml
-Liquid super glue 5pieces
-Hot melt(glue gun) 10pieces
-Wire 100cm
-PVC pipe (diameter 2.2cm) 1piece
[Painting materials]
1.When undercoat is Gesso
-Gesso 100ml
-Paintbrush 1piece
-lacquer paint(Bottle lacquer paint , Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece
2.When undercoat is Wood glue thinned with water
-Wood glue 100ml
-Water a little
-Paintbrush 1piece -Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint , Lacquer Spray etc) proper quantity*
-Masking tape 1piece
3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of sticky glue in Japan) 100ml
-lacquer thinner 100ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint , Lacquer Spray etc) proper quantity*
-Masking tape 1piece
*The paiting area is written in the package, refer it. Details are here .
Materials cost
5000Yen (about 100Yen = 1dollar)
Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc (Use also a "Pro blade" and a "Blade breaker" )
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Pipe cutter or Saw
-Paint tools (brush etc)
Convenient tools when you have -Standard art knife,Cushion grip art knife
-Circle cutter
-Super glue Accelerator
This spary can harden Super glue instantly. Details are here .
←100ml ←420ml
Work time
18hours
Spec
Height 50cm
Cup diameter 60cm
Template data
I threw away the Templates , so I can't upload.
Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.
-When you dig mterials etc with Soldering iron , make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.
-Don't use fire near the things which are easy to burn such as paint, thinner
etc.
-When you finished using tools, pull an outlet.
-Read labels of materials and tools, and understand how to use.
Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.
Thanks for donation of YouTube's SUPER THANKS !
Thanks for donation ! micaelahpetersen-san!
I'm so glad my Mihawk's NIGHT tutorial helped you!
Please make it too you!
Thanks for donation ! AnyaHigure-san!
I'm so glad my works helped you!
More history
Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan) .
When you want to know how to make Templates , browse this page .
I use this site's hemisphere type Templates for the cup.
Thank you very much.
The page of hemispere type Templates.
I finished making the Templates .
Building
Make a cup.
Cut material into the Templates form.
Cut out 5mm thick EVA foam .
EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.
Introduction video
VIDEO
Use a sharp blade. For example, "Pro Blade" .
This is so sharp.
←10枚入り
←50枚入りお得パック
I always use "Running fire box cutter" ,"Blade breaker" ,Cutting mat .
"Blade breaker" can break the blade easily.
Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
●5mm厚COSボードをAmazonで買う
●5mm厚COSボードを楽天で買う
●5mm厚コスプレボードをAmazonで買う
●5mm厚コスプレボードを楽天で買う
Make a hole with a Box cutter etc .
Glue with a Liquid super glue .
When you use a Super glue Accelerator , Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)
Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.
VIDEO
When you use 100ml, you can make a armorset or about two, three weapons.
←100ml ←420ml
I finished glueing.
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam .
●1.5mm厚COSボードをAmazonで買う
●1.5mm厚COSボードを楽天で買う
●1.5mm厚コスプレボードをAmazonで買う
●1.5mm厚コスプレボードを楽天で買う
Glue with a Liquid super glue .
Carve the pattern with a Soldering iron .(Don't breathe in the smoke and don't put in eyes)
ギャクヨガが使っているハンダゴテです、コテ台付き。
Draw patterns with a Hot melt(glue gun) .
ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい!
Cut 1.5mm or 2mm thick EVA foam thin.
Glue with a Liquid super glue .
Cut material into the Templates form.
Cut out 5mm thick EVA foam .
Glue with a Liquid super glue .
Round off the corners with a Box cutter etc .
Cut out 10mm thick EVA foam .
You must use a tool for cutting out a fair circle. Details are here .
Cut with a Box cutter etc .
Glue with a Liquid super glue .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
↑ギャクヨガ愛用ライター、使いやすい! ガスがなくなったらボンベで充填しましょう
Make a stem.
Cut material into the Templates form.
Cut out 5mm thick EVA foam .
Glue with a Liquid super glue .
Cut it into slant with a Box cutter etc .
Cut out 10mm thick EVA foam .
You must use a tool for cutting out a fair circle. Details are here .
Glue with a Hot melt(glue gun) .
Cut out 10mm thick EVA foam .
You must use a tool for cutting out a fair circle. Details are here .
Glue with a Liquid super glue .
I finished glueing.
Cut out 10mm thick EVA foam .
You must use a tool for cutting out a fair circle. Details are here .
Glue with a Liquid super glue .
Form by shaving with a Box cutter etc .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Glue with a Liquid super glue .
Heap a Hot melt(glue gun) for reinforcement.
Cut 1.5mm or 2mm thick EVA foam thin.
Glue with a Liquid super glue .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Draw patterns with a Hot melt(glue gun) .
Cut out 10mm thick EVA foam .
You must use a tool for cutting out a fair circle. Details are here .
Glue with a Liquid super glue .
Cut with a Box cutter etc .
Glue with a Liquid super glue .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Mark pattern by penn.
Carve the pattern with a Soldering iron .(Don't breathe in the smoke and don't put in eyes)
I finished carving.
Cut out 10mm thick EVA foam .
You must use a tool for cutting out a fair circle. Details are here .
Glue with a Liquid super glue .
Cut with a Box cutter etc .
I finished cutting.
Glue with a Liquid super glue .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Carve the pattern with a Soldering iron .(Don't breathe in the smoke and don't put in eyes)
Glue with a Liquid super glue .
Upper view.
Bend wires.
Glue with a Hot melt(glue gun) .
Cut 1.5mm or 2mm thick EVA foam thin.
Glue with a Liquid super glue .
Make a core.
Cut a PVC pipe .
PVC pipe can be cut with a saw.
But a Pipe cutter is more better.
It can cut quickly and neatly.
This is a video of cutting method of PVC pipe , bending method, jointing method.
VIDEO
I finished cutting.
Cut out 10mm thick EVA foam .
You must use a tool for cutting out a fair circle. Details are here .
Glue with a Liquid super glue .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Make a base.
Cut out 10mm thick EVA foam .
Paste with "Bond G17"(one of sticky glue in Japan) .
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(You may glue with a Liquid super glue . However "Bond G17"(one of sticky glue in Japan) is useful for the large area.)
Paste together only the edge with Liquid super glue .
I finished glueing.
Form by shaving with a Box cutter etc .
Remove the corner by toasting with a Lighter .(Don't breathe in the smoke, be careful about fire)
Please follow and subscribe
Please follow my Facebook & twitter!
Please subscribe my channel!
Painting
Begin painting.
At first, paint undercoat on EVA foam .
The effects are as follows.
-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.
1. Gesso
This is easy.
【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint .
-There are several colors one, white black etc.
【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan) .
Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan) .
【Commodities page】
Gesso or Black Gesso
or
【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
2. Wood glue thinned with water
This is so easy.
【Merit】
-Someone can get
-Someone can use easy
【Demerit】
-Drying time is a little long.
【Commodities page】
3. "Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.
【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.
【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it
easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.
【Commodities page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner
&
-About paint
I use following paint.
You can use acrylic paint , when you use Gesso .
I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial. But this method is danger, then I don't recommend.
I recommend Gesso or Wood glue thinned with water.
Paint "Bond G17"(one of sticky glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.
Dry it about 2 ~ 6 hours.
Paint gray color as undercoat color with Lacquer Spray .
Paint gray color as undercoat color with Lacquer Spray .
Paint white color with Lacquer Spray .
Paint white pearl color with Lacquer Spray .
Stick Masking tape on the point you don't want to paint.
ギャクヨガは細かいところは10mm幅(左の商品)、広い所は30mm幅(右の商品)を使ってます
Paint black with Lacquer Spray .
Paint gold Bottle lacquer paint by Drybrush painting.
Drybrush painting is easy, you can do it with a paint brush.
Read here or watch this video.
VIDEO
When you paint Bottle lacquer paint , use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel
paints after dry.),
panint stick, thinner.
I finished painting.
Paint black color as undercoat color with Lacquer Spray .
Paint gold Bottle lacquer paint by Drybrush painting.
Complete
VIDEO
Dismantle state.
How to assemble.
Complete.
Please follow Twitter
About using for business
When you use my contents for business, follow this rule .