Monster Hunter Rise
How to make the sheath of Mizutsune long sword "Kakaru Kumo Naki" (with templates)
*Sword tutorial is here


Watch tutorial video at first


Materials for the sheath
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Scotch tape(Sellotape) 1pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→3mm thick 100cm X 40cm
→5mm thick 100cm X 100cm
→10mm thick 100cm X 150cm
-Cloth 100cm X 40cm
-Liquid super glue 15pieces

[Painting materials]
1.When undercoat is Gesso
-Gesso 150ml
-Paintbrush 1piece
-Paintbrush 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

2.When undercoat is Wood glue thinned with water
-Wood glue 150ml
-Water a little
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of sticky glue in Japan) 100ml
-lacquer thinner 150ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost to make the sheath
4000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Paint tools (brush etc)

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Gas toach
-Super glue Accelerator

Work time to make the sheath
20hours

Spec
-Sword
Weight 100g
Length 215cm

-Sheath
Weight 100g
Length 168cm

Template data
PDF format(A4 size) Sword 1/2 PDF format(A4 size) Sword 2/2

PDF format(A4 size) Sheath 1/3 PDF format(A4 size) Sheath 2/3 PDF format(A4 size) Sheath 3/3

How to download & print
Read this.

Additional explanation
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

1/2 Sword Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".


2/2 Sword Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".


1/3 Sheath Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".


2/3 Sheath Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".


3/3 Sheath Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.


Thanks for donation of YouTube's SUPER THANKS!


Thanks for donation! micaelahpetersen-san!
I'm so glad my Mihawk's NIGHT tutorial helped you!
Please make it too you!


Thanks for donation! AnyaHigure-san!
I'm so glad my works helped you!


More history

Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan).
When you want to know how to make Templates of weapons, browse this page.



Building the sheath


Cut material into the Templates form.
Cut out 5mm thick EVA foam.
Cut out 10mm thick EVA foam.





EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video




Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.






●5mm厚COSボードをAmazonで買う


●5mm厚COSボードを楽天で買う

COSボード Sサイズ(450mm×600mm) 5mm厚 白 価格：583円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 5mm厚 白 価格：1120円（税込、送料別) (2019/10/23時点)

COSボード Lサイズ(900mm×1800mm) 5mm厚 白 価格：3249円（税込、送料別) (2019/10/23時点)

COSボード Sサイズ(450mm×600mm) 5mm厚 黒 価格：650円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 5mm厚 黒 価格：1344円（税込、送料別) (2019/10/23時点)

●5mm厚コスプレボードをAmazonで買う


●5mm厚コスプレボードを楽天で買う

コスプレボード 白5mm×660mm×500mm 価格：517円（税込、送料別) (2019/10/23時点)

コスプレボード 白5mm×660mm×1000mm 価格：990円（税込、送料別) (2019/10/23時点)

コスプレボード　白5mm×1000mm×2000mm 価格：3564円（税込、送料別) (2019/10/23時点)

コスプレボード　黒5mm×660mm×1000mm 黒だから裏塗り処理を省略出来る 価格：1320円（税込、送料別) (2019/10/23時点)

コスプレボード　黒5mm×1000mm×2000mm 黒だから裏塗り処理を省略出来る 価格：4180円（税込、送料別) (2019/10/23時点)

●10mm厚COSボードをAmazonで買う


●10mm厚COSボードを楽天で買う

COSボード Sサイズ(450mm×600mm) 10mm厚 白 価格：986円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 10mm厚 白 価格：1849円（税込、送料別) (2019/10/23時点)

COSボード Lサイズ(900mm×1800mm) 10mm厚 白 価格：6274円（税込、送料別) (2019/10/23時点)

COSボード Sサイズ(450mm×600mm) 10mm厚 黒 価格：1232円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 10mm厚 黒 価格：2353円（税込、送料別) (2019/10/23時点)

●10mm厚コスプレボードをAmazonで買う


●10mm厚コスプレボードを楽天で買う

コスプレボード 白10mm×660mm×500mm 価格：880円（税込、送料別) (2019/10/23時点)

コスプレボード　白10mm×660mm×1000mm 価格：1540円（税込、送料別) (2019/10/23時点)

コスプレボード　黒10mm×660mm×1000mm 黒だから裏塗り処理を省略出来る 価格：2486円（税込、送料別) (2019/10/23時点)

Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)





Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.


When you use 100ml, you can make a armorset or about two, three weapons.
←100ml ←420ml


I finished glueing.


Make "V" form gap.
Cut out with a Box cutter etc.


I finished cutting.


Cut material into the Templates form.
Cut out 10mm thick EVA foam.
Glue with a Liquid super glue.


I finished glueing.


Mark a position of 3.5cm from the edge.


Round off the corners with a Box cutter etc.


I finished shaving.


Remove the corner by toasting with a Gas toach or a Lighter.(Don't breathe in the smoke, be careful about fire)
(When the area is large, using Gas toach is easier.)




↑ギャクヨガ愛用ライター、使いやすい！ ガスがなくなったらボンベで充填しましょう

Mark holes on the Templates.


I finished marking.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Mark holes on the Templates.


I finished marking.


Cut out with a Box cutter etc.


I finished cutting.


Cut the corner with scissors.


Cut the corner with scissors.


I finished cutting.


Glue with a Liquid super glue.


I finished glueing.


Remove the corner by toasting with a Gas toach or a Lighter.(Don't breathe in the smoke, be careful about fire)
(When the area is large, using Gas toach is easier.)


Carve scars with a Soldering iron.


ギャクヨガが使っているハンダゴテです、コテ台付き。

Cut material into the Templates form.
Cut out 3mm thick EVA foam.
Glue with a Liquid super glue.





●3mm厚COSボードをAmazonで買う


●3mm厚COSボードを楽天で買う

COSボード Sサイズ(450mm×600mm) 3mm厚 白 価格：471円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 3mm厚 白 価格：807円（税込、送料別) (2019/10/23時点)

COSボード Lサイズ(900mm×1800mm) 3mm厚 白 価格：2577円（税込、送料別) (2019/10/23時点)

COSボード Mサイズ(600mm×900mm) 3mm厚 黒 価格：986円（税込、送料別) (2019/10/23時点)

COSボード（シールタイプ） Mサイズ(600mm×900mm) 3mm厚 白 価格：1400円（税込、送料別) (2019/10/23時点)

●3mm厚コスプレボードをAmazonで買う


●3mm厚コスプレボードを楽天で買う

コスプレボード 白3mm×660mm×500mm 価格：418円（税込、送料別) (2019/10/23時点)

コスプレボード　白3mm×660mm×1000mm 価格：693円（税込、送料別) (2019/10/23時点)

コスプレボード　白3mm×1000mm×2000mm 価格：2464円（税込、送料別) (2019/10/23時点)

コスプレボード 黒3mm×660mm×1000mm 黒だから裏塗り処理を省略出来る 価格：990円（税込、送料別) (2019/10/23時点)

コスプレボードシール　白3mm×660mm×500mm 接着剤不要のシール接着、装飾等に 価格：726円（税込、送料別) (2019/10/23時点)

I finished glueing.


Cut 1.5mm or 2mm thick EVA foam thin.


Glue with a Liquid super glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke, be careful about fire)


Cut material into the Templates form.
Cut out 3mm thick EVA foam.
Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 3mm thick EVA foam.
Glue with a Liquid super glue.


Cut unnecessary parts with a Box cutter etc.


I finished cutting.


Cut 1.5mm or 2mm thick EVA foam thin.


Glue with a Liquid super glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke, be careful about fire)


Present state.


Please follow and subscribe
Please follow my Facebook & twitter!


Please subscribe my channel!


Painting
Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.


1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities　page】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or

2.Wood glue thinned with water
This is so easy.

【Merit】
-Someone can get
-Someone can use easy

【Demerit】
-Drying time is a little long.

【Commodities　page】


3."Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Commodities　page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner
&

-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.



I use "Zoukei be-su" as undercoat this time.
But it's sold only in Japan.
Substitute Gesso or Wood glue thinned with water.


Paint "Zoukei be-su" twice with a brush.
Dry it about 2 ~ 6 hours.


Paint black as undercoat color with Lacquer Spray.


Paint gray Bottle lacquer paint by Drybrush painting.


Drybrush painting is easy, you can do it with a paint brush.
Read here or watch this video.


When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.



Paint white with Lacquer Spray.


Paint pink Bottle lacquer paint with a Airbrush.





●初心者にオススメ
安価なUSB充電式エアブラシ。
これ一つでエアブラシ塗装が手軽に行えます、60分充電すれば45分稼働できます。
エアブラシ塗装を手軽に始めるならまずはこれ。


●本格的に始めるなら
Mr.カラーを作っているクレオスのエアブラシセットです。
エアブラシ塗装に必要なものが一式セットになった定番商品です。
ギャクヨガも昔使ってました。
電源はコンセント接続です。



●ギャクヨガが使っている物を使いたいなら
性能は高いですが高価です。
ホースは別途購入が必要です。



Paint purple Bottle lacquer paint with a Airbrush.


Paint gold Bottle lacquer paint by Drybrush painting.


Paint gold Bottle lacquer paint by Drybrush painting.


After painting
Cut out cloth.


Turn up the hem.


Sew with a sewing machine.


I finished sewing.


Tie it.


Complete


Please watch the tutorial video too.






















Please follow Twitter
Tweets by gyakuyoga

About using for business
When you use my contents for business, follow this rule.