My profile & Contact

Attack on titan(shingeki no kyojin)
How to make "3d maneuver gear"(Rittai kidou souti) (with templates)
Comic version
Vol.2 sheath part


Return to Vol.1 (blade part)

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.


-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make templates
Make Templates from "Kousakuyousi"(one of hard paper in Japan).
When you want to know detailed tutorial of making Templates, browse this page.
Pattern paper is here.



How to build
Make body part.
The numbers in photo is name of templates.
Cut material into the Templates form.
Cut out 10mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************

-------------------------------------------------------------------------------------------------------
【10mm厚COSボードをキャラヌノで買う】


【COSボードを楽天で買う】

-------------------------------------------------------------------------------------------------------
【10mm厚コスプレボードをAmazonで買う】


【コスプレボードを楽天で買う】

-------------------------------------------------------------------------------------------------------

**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************

Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About super glue
I use general liquid super glue.

**********************************************************************

Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Up side view.


Glue with a Liquid super glue.


Front view.


Make the cylinder.
Cut material into the Templates form.
Cut out 5mm thick EVA foam.


-------------------------------------------------------------------------------------------------------
【5mm厚COSボードをキャラヌノで買う】


【COSボードを楽天で買う】

-------------------------------------------------------------------------------------------------------
【5mm厚コスプレボードをAmazonで買う】


【コスプレボードを楽天で買う】

-------------------------------------------------------------------------------------------------------

You must use a tool for cutting out a fair circle. Details are here.



Glue with a Liquid super glue.


Paste circles.
Glue with a Liquid super glue.


Paste three places.
(Surrounded part by red circle)


Make the tip part.
Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Make the nozzle part.
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.


-------------------------------------------------------------------------------------------------------
【1.5mm厚COSボードをキャラヌノで買う】


【COSボードを楽天で買う】

-------------------------------------------------------------------------------------------------------
【1.5mm厚コスプレボードをAmazonで買う】


【コスプレボードを楽天で買う】

-------------------------------------------------------------------------------------------------------

Make cylinder form.
Glue with a Liquid super glue.


Fill up inside.
Fill it up with a Hot melt(glue gun).



Glue with a Hot melt(glue gun).


Glue with a Liquid super glue.


Glue with a Hot melt(glue gun).


Make fitting parts.
Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Make the front side.
Glue with a Liquid super glue.


Glue with a Liquid super glue.
F part is pasted together two peaces.


Glue with a Liquid super glue.
H part is pasted together two peaces.


Make rear side.
Glue with a Liquid super glue.


Cut the cord.
Tie a hook.


Glue with a Hot melt(glue gun).


Glue with a Hot melt(glue gun).


Glue with a Hot melt(glue gun).


Make rivets with a Hot melt(glue gun).


Cut the cord.


Cut out 1.5mm or 2mm thick EVA foam.


Glue with a Hot melt(glue gun).


Make a break with a Box cutter.


Put Velcro between the break.
Glue Velcro with "Bond G17"(one of liqud glue in Japan) or a Hot melt(glue gun).



Glue with a Hot melt(glue gun).


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)

←ガス充填式ライターとガスボンベを使うとお得

Make the fitting parts.
There are 2 kinds of how to fit.

[Vol.1 Easy method]
Cut the cord.
Tie a hook.


Glue with a Hot melt(glue gun).


Hang the hooks to belt.


I finished attaching.


[Vol.2 The method according to setting]
Make the hole the white part of wasit cloth.


Mark with a pen.


Make a hole with a Box cutter.


Insert Velcro to the depths.
Glue Velcro with "Bond G17"(one of liqud glue in Japan) or a Hot melt(glue gun).


Pass the Velcro through the white parts.
Paste together the Velcro.


Hang the hooks to belt.


I finished attaching.
This method can fit hardly more than easy method.
Moreover sheath can be horizontal.


Make fake blades.
Cut material into the Templates form.
Cut out 5mm thick EVA foam.
Put in these to except the gate putting in true blade.


To be continued vol.3(tank anchor part)

Please
I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.


























Return to Top page