How to make Gloves with nails
[Materials for making templates]
-Drawing paper 5piece
-Scotch tape(Sellotape) 1piece
- EVA foam
→1.5mm or 2mm thick 100cm X 10cm - Liquid super glue 3piece
- Hot melt(glue gun) 10piece
-Thin Gloves 1set
1.When undercoat is Gesso
- Gesso 50ml
-lacquer paint( Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
2.When undercoat is Wood glue thinned with water
-Wood glue 50ml
-Water a little
-Paintbrush 1piece -Paper cup, bowl etc 1piece
-lacquer paint( Bottle lacquer paint, Lacquer Spray etc) proper quantity*
3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
- "Bond G17"(one of sticky glue in Japan) 50ml - lacquer thinner 50ml
-Paintbrush 1piece -Paper cup, bowl etc 1piece -lacquer paint( Bottle lacquer paint, Lacquer Spray etc) proper quantity*
*The paiting area is written in the package, refer it. Details are here.
1500Yen (about 100Yen = 1dollar)
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler) -Scissors - Box cutter etc(Use also a "Pro blade" and a "Blade breaker") - Cutting mat - Hot melt(glue gun) - Lighter
- Paint tools (brush etc)
Convenient tools when you have
- Standard art knife,Cushion grip art knife
- Super glue Accelerator
I threw away the Templates, so I can't upload.
Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.
-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.
-Don't use fire near the things which are easy to burn such as paint, thinner
-When you finished using tools, pull an outlet.
-Read labels of materials and tools, and understand how to use.
Cut out 1.5mm or 2mm thick EVA foam.
EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
Use a sharp blade. For example, "Pro Blade".
This is so sharp.
I always use "Running fire box cutter", "Blade breaker", Cutting mat.
"Blade breaker" can break the blade easily.
Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)
Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.
When you use 100ml, you can make a armorset or about two, three weapons.
Draw patterns with a Hot melt(glue gun).
Please support me by donating
If my tutorials supports you, please support me.
You can donate to me with PayPal.
I'm gonna use donation to make new props, thanks.
Click this ↓.
Thanks for donating from donation form! Serena-san!
I'm so glad my tutorials helped you!
Thanks for donating from donation form! ray-san!
I'm so glad my Nanami's hatchet tutorial helped you!
Thanks for donating from donation form! kinrah-san!
I'm so glad my Kimetsu templates helped you!
Please subscribe and follow
Please subscribe my channel!
Please follow my twitter!
At first, paint undercoat on EVA foam.
The effects are as follows.
-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.
This is easy.
-It's usable just to paint with a paint brush.
- Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).
Gesso or Black Gesso
Lacquer Spray or Bottle lacquer paint or acrylic paint
2.Wood glue thinned with water
This is so easy.
-Someone can get
-Someone can use easy
-Drying time is a little long.
3. "Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.
-"Bond G17" is japanese commodity. Then you can't get it
-It needs thinner, then you must work outdoors.
-It burns easily.
because "Bond G17" burns easily. Don' use a Don't use fire until drying, Lighter etc until drying.
The parts will be charred in seconds.
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner
I use following paint.
You can use acrylic paint, when you use Gesso.
I use Gesso in this tutorial.
Paint Gesso twice or three times with a brush. Dry it about 2 ~ 6 hours.
Paint Lacquer Spray and Bottle lacquer paint.
When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel
paints after dry.),
panint stick, thinner.
Glue them with Hot melt(glue gun) on gloves.
About using for business
When you use my contents for business, follow this rule.