Attack on titan
How to make hanji's goggles (with templates)
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece
→1.5mm or 2mm thick 100cm X 10cm
-Synthetic leather 100cm X 20cm
-Clear color plastic sheets 100cm X 10cm
-"Bond G17"(one of sticky glue in Japan) 100ml
-Liquid super glue 1piece
-Elastic cord 1piece
1500Yen (about 100Yen = 1dollar)
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Pinvice or Prick punch etc
-Tool set required for rivet
Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator
PDF format(A4 size)
-How to print is here.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.
Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.
-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.
-Don't use fire near the things which are easy to burn such as paint, thinner etc.
-When you finished using tools, pull an outlet.
-Read labels of materials and tools, and understand how to use.
Please support me by donation
If my tutorials supports you, please support me.
You can donate to me with PayPal or credit cards.
I'm gonna use donation to make new props, thanks.
Click this ↓.
Thanks for donating! kidkat-san!
I'm so glad my tutorials helped you!
Thanks for donating! ray-san!
I'm so glad my Ttrunks's sword tutorial helped you!
Thanks for donating! Parker-san!
I'm so glad my Murakumogiri tutorial helped you!
Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan).
I finished making the Templates.
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
Use a sharp blade. For example, "Pro Blade".
This is so sharp.
I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.
Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.