Jujutsu Kainsen
How to make Gojou's eyepatch (with templates)


Tutorial video
When you watch this video before reading this page, you can understand this page better.


Materials
-Drawing paper 10sheets

[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 10cm
-Synthetic leather 100cm X 20cm
-"Bond G17"(one of sticky glue in Japan) 100ml
-Hot melt(glue gun) 10pieces
-Velcro 20cm
-Screen of screen door 1piece

[Painting materials]
-

Materials cost
500Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)

Convenient tools when you have
-Standard art knife,Cushion grip art knife

Work time
1hours

Spec
Weight 30g

Template data
PDF format(A4 size)

-How to print is here.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

Completion drawing


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Make the template
Make Templates from Drawing paper.



Please support me by donating
If my tutorials supports you, please support me.
You can donate to me with PayPal.
I'm gonna use donation to make new props, thanks.
Click this ↓.


Thanks for donating from donation form! xxCatnip-san!
I'm so glad my Longinus tutorial helped you!


Thanks for donating from donation form! killercredo-san!
I'm so glad my Tengen utorial helped you!


Thanks for donating from donation form! Talengard-san!
I'm so glad my tutorials helped you!
Please enjoy cosplay of Jujutsu Kainsen(*^^*)


More history

Building
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.




EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.

Introduction video





コスプレ造形向けボードはネット通販で手軽に買えます。
ちなみに、COSボードとコスプレボードの違いは特にないと感じます、好みでどうぞ。

●1.5mm厚COSボードをAmazonで買う


●1.5mm厚COSボードを楽天で買う

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Sサイズ(450mm×600mm) 1.5mm厚 白
価格：359円（税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Mサイズ(600mm×900mm) 1.5mm厚 白
価格：672円（税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Lサイズ(900mm×1800mm) 1.5mm厚 白
価格：1681円（税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード Mサイズ(600mm×900mm) 1.5mm厚 黒
価格：672円（税込、送料別) (2019/10/23時点)

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

COSボード（シールタイプ）Mサイズ(600mm×900mm) 1.5mm厚 白
価格：1120円（税込、送料別) (2019/10/23時点)

●1.5mm厚コスプレボードをAmazonで買う


●1.5mm厚コスプレボードを楽天で買う

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

コスプレボード　白1.5mm×660mm×1000mm
価格：605円（税込、送料別) (2019/10/23時点)





Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.



Cut out Synthetic leather.





Glue with "Bond G17"(one of sticky glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



I finished glueing.


Make holes on the Templates.


Cut out with a Box cutter etc.


Cut screen of screen door.



Glue with a Hot melt(glue gun).


ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい！

I finished glueing.


Glue Velcro with "Bond G17"(one of sticky glue in Japan). Detailes are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



I finished glueing.

Complete


Please watch the tutorial video too.












About using for business
When you use my contents for business, follow this rule.