Bend EVA foam and keep the form by heat

-How to do
Heat EVA foam and bend.
Cool it as it is , then it keep a form in the time of bending.

Use 5mm thick EVA foam for example. Heat with a Heat gun or a Steam iron etc and bend.


Cool it as it is , then it keep a form in the time of bending.



-Heating tools

[Heat gun]
Heat gun is a drier for industrial use.
The heat is strong more than general driers.
If you don't wanna use fire, use this.
-Store:D.I.Y shop
-Price:2500Yen~ (about 130Yen = 1dollar)



[Steam iron]
Normaly steam iron can heat too.
-Store:D.I.Y shop, Electrical appliance store
-Price:2500Yen~ (about 130Yen = 1dollar)


*You can use fire too.
I wrote about except Heat gun for reference.
However it's dangerous. I recommend Heat gun
If accedents happens, it's self-responsibility.

[Lighter]
Small things are heated with Lighter mainly.
Lighter with nozzle is convenience.

↑ギャクヨガ愛用ライター、使いやすい！ ガスがなくなったらボンベで充填しましょう

[Gas toach]
Big things like armors can be also bended with Lighter.But it takes taime.
Then, using Gas toach is good.

Gas toach is a machine come out fire hardly.
A commodity with a trigger is so useful.



If gas disappers, you can buy only gas bombe.



-Cooling tools
If you don't wait untile cooling, you may cool it by tools.
Use such as below things.
-Water
-Wet towels

Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.


Thanks, everybody!

Jun,17,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy your cosplay!


Jun,17,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy make your props!


More history

Please follow and donate
Please follow my twitter.


Please donate me.


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

-If accedents happens, it's self-responsibility. Keep safety environment.

Please follow Twitter


About using for business
When you use my contents for business, follow this rule.