EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.



↑刃はついてないので→の替え刃とセットで買うこと





●5mm厚コスプレボードを楽天で買う


送料無料の5枚セット


●5mm厚コスプレボードをAmazonで買う


●5mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)



Glue with "Bond G17"(one of sticky glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(You may glue with a Liquid super glue. However "Bond G17"(one of sticky glue in Japan) is useful for the large area.)


チューブ入り(箱入り)の方が使い勝手はいいですが、缶入りの方がコスパは断然良いです。

Glue with a Liquid super glue.


Glue with a Liquid super glue.
Paste and repiet to point made fat.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


I finished glueing. Make sticked state by reeling cord and desiccate.


Form by shaving with a Box cutter etc.


I finished shaving.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)




Please follow X(Twitter)
Please follow my X(twitter).


Painting
Stand the cylinder form parts with a wood struck big nails.


Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.


1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities　page】
Gesso or Black Gesso
黒いジェッソと詰替えパック


白いジェッソと詰替えパック



2.Wood glue thinned with water
This is so easy.

【Merit】
-Someone can get
-Someone can use easy

【Demerit】
-Drying time is a little long.

【Commodities　page】


3."Bond G17"(one of liqud glue in Japan)
This is dangerous method, it's most likely happening fire.
I wrote about this method as a archive,
However I don't recommend this.
I don't use this method now, I use other method now.
If accedents happens, it's self-responsibility.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Commodities　page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner

チューブ入り(箱入り)の方が使い勝手はいいですが、缶入りの方がコスパは断然良いです。



-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.


・About mask
In spray painting or lacquer painting, use a mask for painting.
←フィルタ付きセット商品 ←替えフィルタ


I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial.
But this method is danger, then I don't recommend.
If accedents happens, it's self-responsibility.
I recommend Gesso or Wood glue thinned with water.


Stand it with a wood struck big nails.


Paint "Bond G17"(one of sticky glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Paint white color as undercoat color with Lacquer Spray.


Paint pink color with Lacquer Spray.


Actually, I used a Airbrush too.
If you want to make light and shade, use it.
About Airbrush is here.





●初心者にオススメ
安価なUSB充電式エアブラシ。
これ一つでエアブラシ塗装が手軽に行えます。
エアブラシ塗装を手軽に始めるならまずはこれ。


●ギャクヨガが使っている物を使いたいなら
性能は高いですが本格的です。
左がエアブラシ本体、右が空気を送り出す装置で両方必要です。



After painting
Use a plastic ball as ball part.


Make thing can be lighted up by putting in a light.


Cut out 10mm thick EVA foam.
Glue with a Hot melt(glue gun).
Paste the light. Glue with a Hot melt(glue gun).





●10mm厚コスプレボードを楽天で買う


●10mm厚コスプレボードをAmazonで買う


●10mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)




ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい！

state put a lid on.


Paint white color with Lacquer Spray.


Glue with a Hot melt(glue gun).


Complete
















Visitor's works
猫いちご椀さん
作業メモとかまとめ用に過去制作物のコス＆造形写真UPなのです。
♯FFXIVミコッテ　
杖ギャクヨガ様のHP参考にさせて頂きました。
↓初心者にも解りやすく素晴らしいHPです。


Please follow X(Twitter)
My X account is here.

About using for business
When you use my contents for business, follow this rule.