Additional explanation
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.
1/2 Completion image Caution Bellow photo is a image photo aftet completing. Caution Don't print bellow photo. Caution Read "How to print".
2/2 Completion image Caution Bellow photo is a image photo aftet completing. Caution Don't print bellow photo. Caution Read "How to print".
Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.
-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.
-Don't use fire near the things which are easy to burn such as paint, thinner
etc.
-When you finished using tools, pull an outlet.
-Read labels of materials and tools, and understand how to use.
Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.
EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.
Introduction video
Use a sharp blade. For example, "Pro Blade".
This is so sharp. ←10枚入り ←50枚入りお得パック
Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
●1.5mm厚コスプレボードを楽天で買う
送料無料の5枚セット
●1.5mm厚コスプレボードをAmazonで買う
●2mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)
Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)
Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.
When you use 100ml, you can make a armorset or about two, three weapons.
I finished glueing.
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
Make rivets with a Hot melt(glue gun).
ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい！
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
Cut material into the Templates form.
Cut out 5mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
Use a Iron gardening stick(diameter 0.8cm).
Use it as a core.
Cut it wit nippers, Freeway coping saw, etc.
This stick is just a iron stick.
You can substitute various metalic sticks. 園芸用の棒はホームセンターや100均で買った方が安い。
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)
I finished making it smooth.
Present state.
Please follow and donate
Please follow my twitter.
Please donate me.
Painting Glue a broken piece of material. Hold it in painting.
(Cut it off after painting.)
Glue a broken piece of material. Hold it in painting.
(Cut it off after painting.)
Use clips.
Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.
-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.
【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.
【Commodities page】
3."Bond G17"(one of liqud glue in Japan)
This is dangerous method, it's most likely happening fire.
I wrote about this method as a archive,
However I don't recommend this.
I don't use this method now, I use other method now.
If accedents happens, it's self-responsibility.
【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.
【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it
easily.
-It needs thinner, then you must work outdoors.
-It burns easily. Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.
