How to make Dark Souls II Faraam Set's waist cloth - YOGA Cosplay(GyakuYoga) [Tutorial of Cosplay weapon,aromor,prop]



ツイート

DARK SOULS II
Faraam Set
How to make waist cloth

Watch tutorial video at first

Materials
[Materials for making templates]
-Tracing paper 2m

[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 10cm
-Brown Synthetic leather 100cm X 50cm
-Green Cloth 100cm X 100cm
-Mesh Cloth 100cm X 100cm
-"Bond G17"(one of sticky glue in Japan) 100ml
-Hot melt(glue gun) 20pieces
-Velcro 40cm
-Rivet 10pieces

[Painting materials]
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
1000Yen (about 130Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Paint tools (brush etc)
-Punch and hammer
-Tool set required for rivet
-Sewing machine
-Sewing tools

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator

Work time
15hours

Spec
-

Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

-If accedents happens, it's self-responsibility. Keep safety environment.

Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.

Thanks, everybody!

Jun,17,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy your cosplay!

Jun,17,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy make your props!

More history

Make the template
Make Templates from Tracing paper.

Building
Cut out Synthetic leather.
Sew with a sewing machine.

I used Synthetic leather sold in "Kyaranuno".
I used "PUストレッチレザー - ブラウン711".

I finished sewing.

Cut out mesh.

Sew with a sewing machine.

Sew Velcro with a sewing machine.

I finished sewing.

Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.

EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.

Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.

↑刃はついてないので→の替え刃とセットで買うこと

●1.5mm厚コスプレボードを楽天で買う

送料無料の5枚セット

●1.5mm厚コスプレボードをAmazonで買う

●2mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)

Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.