How to make winding horn (with templates) - YOGA Cosplay(GyakuYoga) [Tutorial of Cosplay weapon,aromor,prop]



ツイート

How to make winding horn (with templates)

Watch tutorial video at first

Materials
[Materials for making templates]
-Drawing paper 10sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→5mm thick 100cm X 30cm
-Liquid super glue 2pieces
-Hot melt(glue gun) 10pieces
-Hair band 1piece

[Painting materials]
1.When undercoat is Gesso
-Gesso 50ml
-Paintbrush 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

2.When undercoat is Wood glue thinned with water
-Wood glue 50ml
-Water a little
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of sticky glue in Japan) 50ml
-lacquer thinner 50ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
1500Yen (about 130Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Soldering iron and soldering iron stand
-Paint tools (brush etc)

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator

Work time
6hours

Spec
Weight 95g

Template data
PDF format(A4 size)

How to download & print
Read this.

About commercial use
Please follow this rule.

Additional explanation
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

-If accedents happens, it's self-responsibility. Keep safety environment.

Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.

Thanks, everybody!

Nov,30,24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy Fate cosplay!

Aug,6,24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!

Jun,27.24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy Rena cosplay!

More history

Make the template
Make Templates from Drawing paper.
When you want to know how to make Templates, browse this page.

Repeat cutting and pasting.

Cut open.

Copy to new Drawing paper and make a fair copy.

Assemble the fair copy.

Repeat cutting and pasting.

Cut open.

Copy to new Drawing paper and make a fair copy.

Assemble the fair copy.

When you make a ideal from, cut open it. Use it.

Building
Cut material into the Templates form.
Cut out 3mm thick EVA foam.

EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.

Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.

↑刃はついてないので→の替え刃とセットで買うこと

●3mm厚コスプレボードを楽天で買う

送料無料の5枚セット

●3mm厚コスプレボードをAmazonで買う

※COSボード匠は3mm厚の商品は存在しません

Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)

Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.

When you use 100ml, you can make a armorset or about two, three weapons.

Glue with a Liquid super glue.

Glue with a Liquid super glue.

Heat a swelling with a Heat gun or Steam iron, and press it by a finger.
The swelling becomes flat.
(Actually I used fire, but it's dangerous method. I recommend Heat gun or Steam iron.
If accedents happens, it's self-responsibility)

Swelling became flat.

Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)

Cut material into the Templates form.
Cut out 3mm thick EVA foam.

Glue with a Liquid super glue.

Draw patterns with a Hot melt(glue gun).

ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい！

Carve the pattern with a Soldering iron.
(Don't breathe in the smoke and don't put in eyes. If accedents happens, it's self-responsibility.)

ギャクヨガが使っているハンダゴテです、安全の為に台も買いましょう。

I finished carving.

Please follow and donate
Please follow my twitter.

Please donate me.

Painting
Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities　page】
Gesso or Black Gesso
黒いジェッソと詰替えパック

白いジェッソと詰替えパック

2.Wood glue thinned with water
This is so easy.

【Merit】
-Someone can get
-Someone can use easy

【Demerit】
-Drying time is a little long.

【Commodities　page】

3."Bond G17"(one of liqud glue in Japan)
This is dangerous method, it's most likely happening fire.
I wrote about this method as a archive,
However I don't recommend this.
I don't use this method now, I use other method now.
If accedents happens, it's self-responsibility.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Commodities　page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner

チューブ入り(箱入り)の方が使い勝手はいいですが、缶入りの方がコスパは断然良いです。

-About paint
I use following paint.

You can use acrylic paint, when you use Gesso.

・About mask
In spray painting or lacquer painting, use a mask for painting.

←フィルタ付きセット商品

←替えフィルタ

I use Gesso in this tutorial.

Paint Gesso twice or three times with a brush.
Dry it about 2 ~ 6 hours.

Paint black color as undercoat color with Lacquer Spray.

Drybrush paint ocher color Bottle lacquer paint with a paint brush.

Drybrush painting is easy, you can do it with a paint brush.
Read here or watch this video.

When you paint Bottle lacquer paint, use thinner, sticks for mixing, brushes, cups.