Monster Hunter series
Red scissor
How to make Big sword


Materials
[Materials for making templates]
-Drawing paper 20piece
-Scotch tape(Sellotape) 5piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→5mm thick 100cm X 200cm
→10mm thick 100cm X 10cm
-Liquid super glue 10piece
-Hot melt(glue gun) 20piece
-PVC pipe(diameter 2.6cm) 1piece
-Wood stick 1piece

[Painting materials]
-"Bond G17"(one of sticky glue in Japan) 500ml
-lacquer thinner 500ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
5000Yen (about 130Yen = 1dollar)

Work time
37Hours

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Soldering iron and soldering iron stand
-Pipe cutter or Saw
-Paint tools (brush etc)

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator

Spec
Weight 3kg
Length 230cm

Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

-If accedents happens, it's self-responsibility. Keep safety environment.

Please support me
If my tutorials supported you, please support me.

-Support method 1

Please join my YouTube channel's membership.
Just ＄0.99 per month.
These are membership benefits.
-Early access of new videos
-Prioritize replying to comments
-Videos for only members
etc

-Support method 2
Please suppor me by YouTube's SUPER THNAKS.
It's the supporting function for Youtube videos.
It look like SUPER CHAT.
Click this banner.


Thanks, everybody!

Aug,16,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my tutorials helped you!

AnyaKimochi-san's channel


Jun,17,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy your cosplay!


Jun,17,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy make your props!


More history

Make the template
Make ground plan from "Kousakuyousi"(one of hard paper in Japan).
When you want to know how to make Templates of weapons, browse this page.



I finished making the ground plan.


Make Templates by enfleshing Drawing paper on the ground plan.


Repeat cutting and pasting.


Repeat cutting and pasting.


Repeat cutting and pasting.


Repeat cutting and pasting.


Cut open.
Copy to new Drawing paper and make a fair copy.


Cut open.
Copy to new Drawing paper and make a fair copy.


Assemble the fair copy.


When you make a ideal from, cut open it. Use it.
When you want to know how to make Templates, browse this page.


Building the body
Cut material into the Templates form.
Cut out 5mm thick EVA foam.





EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video





Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.



↑刃はついてないので→の替え刃とセットで買うこと





●5mm厚コスプレボードを楽天で買う


送料無料の5枚セット


●5mm厚コスプレボードをAmazonで買う


●5mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)



Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)





Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.

When you use 100ml, you can make a armorset or about two, three weapons.



Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Insert a wood stick.
Glue with a Hot melt(glue gun).


I finished glueing.


Building the tip part
Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Glue with a Liquid super glue.


I finished glueing.
The tip parts can put on and take off.


Mark.


Shave with a Box cutter etc.


Building the hilt
Use a PVC pipe(diameter 2.6cm).
Cut a PVC pipe.
PVC pipe can be cut with a saw.
But a Pipe cutter is more better.
It can cut quickly and neatly.



This is a video of cutting method of PVC pipe, bending method, jointing method.


Cut one side slant.


Glue with a Hot melt(glue gun).


Cut out 10mm thick EVA foam.
Glue with a Hot melt(glue gun).





●10mm厚コスプレボードを楽天で買う


●10mm厚コスプレボードをAmazonで買う


●10mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)



Cut out 10mm thick EVA foam.
Glue with a Hot melt(glue gun).


Cut out 10mm thick EVA foam.


Glue with a Hot melt(glue gun).


Make prickles.
Cut out 5mm thick EVA foam.
Glue with a Liquid super glue.


Glue with a Hot melt(glue gun).
Draw patterns with a Hot melt(glue gun).


Make surface like crabs.
Make Broke piece of EVA foam scrap.
Mix scraps and "Bond G17"(one of sticky glue in Japan).


チューブ入り(箱入り)の方が使い勝手はいいですが、缶入りの方がコスパは断然良いです。

Paint mixed one twice with brush.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
However don't paint to parts made by Plastic sheets.
Dry it about 2 ~ 6 hours.



Please follow X(Twitter)
Please follow my X(twitter).


Painting
Paint red part roughly with Lacquer Spray


Paint red part roughly with Lacquer Spray.


Paint white part roughly with Lacquer Spray


Paint boader of color with a Airbrush politely.





●初心者にオススメ
安価なUSB充電式エアブラシ。
これ一つでエアブラシ塗装が手軽に行えます。
エアブラシ塗装を手軽に始めるならまずはこれ。


●ギャクヨガが使っている物を使いたいなら
性能は高いですが本格的です。
左がエアブラシ本体、右が空気を送り出す装置で両方必要です。



I finished painting.


Complete


















Please follow X(Twitter)
My X account is here.

About using for business
When you use my contents for business, follow this rule.