Puella Magi Madoka Magica
How to make Mami's rifle (with templates)



Watch tutorial video at first


Materials
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Scotch tape(Sellotape) 1pieces

[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 20cm
→5mm thick 100cm X 40cm
→10mm thick 100cm X 40cm
-Liquid super glue 5pieces
-Hot melt(glue gun) 10pieces
-Wire 20cm
-Aluminum stick 1piece
-PVC pipe(diameter 1.8cm) 1piece

[Painting materials]
1.When undercoat is Gesso
-Gesso 100ml
-Paintbrush 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.When undercoat is Wood glue thinned with water
-Wood glue 100ml
-Water a little
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of sticky glue in Japan) 100ml
-lacquer thinner 100ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
1500Yen (about 130Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Pipe cutter or Saw
-Sand paper(240grit)
-Paint tools (brush etc)
-Pinvice or Prick punch etc
-Pliers

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator

Work time
13hours

Spec
Weight 350g
Length 110cm

Template data
PDF format(A4 size)1/2 PDF format(A4 size)2/2

How to download & print
Read this.

About commercial use
Please follow this rule.

Additional explanation
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

1/2 Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".


2/2 Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

-If accedents happens, it's self-responsibility. Keep safety environment.

Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.


Thanks, everybody!

Nov,30,24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy Fate cosplay!


Aug,6,24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!


Jun,27.24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy Rena cosplay!


More history

Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan).
When you want to know how to make Templates of weapons, browse this page.



Building the frame


Make a stock.
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
Cut out 10mm thick EVA foam.
The symbols in photo are parts name of templates.





EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video




Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.



↑刃はついてないので→の替え刃とセットで買うこと





●1.5mm厚コスプレボードを楽天で買う


送料無料の5枚セット



●1.5mm厚コスプレボードをAmazonで買う


●2mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)






●10mm厚コスプレボードを楽天で買う


●10mm厚コスプレボードをAmazonで買う


●10mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)



Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)





Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.


When you use 100ml, you can make a armorset or about two, three weapons.



Glue with a Liquid super glue.


I finished glueing.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.
Glue with a Liquid super glue.





●5mm厚コスプレボードを楽天で買う


送料無料の5枚セット


●5mm厚コスプレボードをAmazonで買う


●5mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)



I finished glueing.


Round off the corners with a Box cutter etc.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)



Building the ornaments 1


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.


Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Round off the corners with a Box cutter etc.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)



Mark holes on the Templates.


I finished marking.


Glue with a Liquid super glue.


Draw patterns with a Hot melt(glue gun).


ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい!

Building the ornaments 2


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.


Mark holes on the Templates.


Glue with a Liquid super glue.


Cut 1.5mm or 2mm thick EVA foam thin.


Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.
Cut out 1.5mm or 2mm thick EVA foam.
Cut out 10mm thick EVA foam.


Glue with a Liquid super glue.


Round off the corners with a Box cutter etc.


Use a wire.
Cut it with Pliers or Nippers.


Make a break with a Box cutter etc.


Glue with a Liquid super glue.


Heap a Hot melt(glue gun) for reinforcement.


Glue with a Liquid super glue.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)



Mark holes on the Templates.


I finished marking.


Glue with a Liquid super glue.


Cut out 10mm thick EVA foam.


Form by shaving with a Box cutter etc.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)



Make hole with a Pinvice or Prick punch etc.



Use a wire.
Cut it with Pliers or Nippers.


Insert.
Glue with a Liquid super glue.


Make hole with a Pinvice or Prick punch etc.


Insert.
Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.


Cut 1.5mm or 2mm thick EVA foam thin.


Glue with a Liquid super glue.


Mark holes on the Templates.


Glue with a Liquid super glue.


Make rivets with a Hot melt(glue gun).


Mark the trigger positons.


Cut material into the Templates form.
Cut out 10mm thick EVA foam.


Make hole with a Pinvice or Prick punch etc.


Use a wire.
Cut it with Pliers or Nippers.


Insert.
Glue with a Liquid super glue.


Make hole with a Pinvice or Prick punch etc.


Glue with a Liquid super glue.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)



Building the ornaments 3


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.


Mark holes on the Templates.


Glue with a Liquid super glue.


Cut 1.5mm or 2mm thick EVA foam thin.


Glue with a Liquid super glue.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)



Glue with a Liquid super glue.


The stock was completed.


Building the barrel


Use a PVC pipe(diameter 1.8cm).
Cut a PVC pipe.
PVC pipe can be cut with a saw.
But a Pipe cutter is more better.
It can cut quickly and neatly.



This is a video of cutting method of PVC pipe, bending method, jointing method.


I finished cutting.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.


Glue with a Liquid super glue.


I finished glueing.


Make a gap with a Box cutter etc.


Cut material into the Templates form.
Cut out 5mm thick EVA foam.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)



Draw patterns with a Hot melt(glue gun).


Glue with a Liquid super glue.


Paste the barrel to the stock.
Glue with a Hot melt(glue gun).


I finished glueing.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.


Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.


Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.


Glue with a Liquid super glue.


Make hole with a Pinvice or Prick punch etc.


Use a Aluminum stick.
You can substitute various metalic sticks.
Cut it into appropriate length with Nippers.


Cut out 1.5mm or 2mm thick EVA foam.


Glue with a Liquid super glue.


Insert.
Glue with a Liquid super glue.


I finished glueing.



Please follow and donate
Please follow my twitter.


Please donate me.


Painting
Stick Masking tape on the point you don't want to paint.


細か所は9mm幅(左)、広い所は30mm幅(右)を使ってます

Stick Masking tape on the point you don't want to paint.


Stand the cylinder form parts with a wood struck big nails.


Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.


1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities page】
Gesso or Black Gesso
黒いジェッソと詰替えパック


白いジェッソと詰替えパック



2.Wood glue thinned with water
This is so easy.

【Merit】
-Someone can get
-Someone can use easy

【Demerit】
-Drying time is a little long.

【Commodities page】


3."Bond G17"(one of liqud glue in Japan)
This is dangerous method, it's most likely happening fire.
I wrote about this method as a archive,
However I don't recommend this.
I don't use this method now, I use other method now.
If accedents happens, it's self-responsibility.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Commodities page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner

チューブ入り(箱入り)の方が使い勝手はいいですが、缶入りの方がコスパは断然良いです。



-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.


・About mask
In spray painting or lacquer painting, use a mask for painting.
←フィルタ付きセット商品 ←替えフィルタ


I use "Zoukei be-su" as undercoat this time.
But it's sold only in Japan.
Substitute Gesso or Wood glue thinned with water.


Paint "Zoukei be-su" twice with a brush.
Dry it about 2 ~ 6 hours.


Paint gray color as undercoat color with Lacquer Spray.


Paint white color with Lacquer Spray.


Stick Masking tape on the point you don't want to paint.


Paint silver with Lacquer Spray.


Paint silver with Lacquer Spray.


Paint black Bottle lacquer paint with a paint brush.


When you paint Bottle lacquer paint, use thinner, sticks for mixing, brushes, cups.





Paint black Bottle lacquer paint with a paint brush.


Actually, I used a Airbrush too.
If you want to make light and shade, use it.
About Airbrush is here.





●初心者にオススメ
安価なUSB充電式エアブラシ。
これ一つでエアブラシ塗装が手軽に行えます。
エアブラシ塗装を手軽に始めるならまずはこれ。


●ギャクヨガが使っている物を使いたいなら
性能は高いですが本格的です。
左がエアブラシ本体、右が空気を送り出す装置で両方必要です。



After painting
Make a jewel from a cleare color Hot melt(glue gun).


Fix the form with scissors.


Paint clear orange color of Bottle lacquer paint with a paint brush.


Complete


Please watch the tutorial video too.












Visitor's works
くみのすけさん
初めて衣装以外のものを作ったのは大変だったけど楽しかった!!
ギャクヨガ様の型紙に感謝
1枚目お写真⇒撮り貴族様(@torikichH0828 )からいただきました、
ありがとうございます!!




美宇梨さん
初めてのコスプレ造形がこんなに楽しかったのは、素晴らしい型紙と丁寧な説明があったからです。本当に有り難うございました。
Photo: @shirasu_coss


もなかさん
*苫小牧コスプレフェスタ*
キャラクター◎巴マミ
ロケ場所◎日本貴金属、ウトナイ湖
photo◎旦那
マスケット銃◎ギョクヨガ様のサイトを参考に製作させて頂きました。ありがとうございます!




しゅぞさん
マスケット銃は、以前進撃のブレードでもお世話になったギャクヨガさんのサイトを参考に製作しました
5日間の短期集中で2丁作れました…ありがとうございました!
これからも更新楽しみにしております


みあまさん
もうゴールしていいよね…?
ギャクヨガさんの型紙をお借りして作りました!
初めての造形にしてはがんばった…よ……!!


ここのさん
ギャクヨガさんのサイトを参考にさせていただきました\( 'ω')/
水道パイプとスプレー以外は100均で揃えた材料とゴミになる予定だった段ボールじゃよ……


Please follow Twitter


About using for business
When you use my contents for business, follow this rule.