How to make Back protector - Monster Hunter series "Yukumono Soubi" - YOGA Cosplay(GyakuYoga) [Tutorial of Cosplay weapon,aromor,prop]

Monster Hunter series
"Yukumono Soubi"
How to make Back protector

Materials
[Materials for making templates]
-Drawing paper 10piece
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 60cm
-Synthetic leather 100cm X 60cm
-"Bond G17"(one of sticky glue in Japan) 100ml
-Liquid super glue 5pieces
-Hot melt(glue gun) 10piece
-Rivet 2piece
-Hook 2piece
-Metal fittings 4piece
-Prastic rings 2piece

[Painting materials]
-Lacquer Spray proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
1000Yen (about 130Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Paint tools (brush etc)
-Tool set required for rivet

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator

Work time
8Hours

Spec
-

Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

-If accedents happens, it's self-responsibility. Keep safety environment.

Please support me
If my tutorials supported you, please support me.

-Support method 1

Please join my YouTube channel's membership.
Just ＄0.99 per month.
These are membership benefits.
-Early access of new videos
-Prioritize replying to comments
-Videos for only members
etc

-Support method 2
Please suppor me by YouTube's SUPER THNAKS.
It's the supporting function for Youtube videos.
It look like SUPER CHAT.
Click this banner.

Thanks, everybody!

Aug,16,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my tutorials helped you!

AnyaKimochi-san's channel

Jun,17,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy your cosplay!

Jun,17,25
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy make your props!

More history

Make the template
Make Templates from Drawing paper.

Building
Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.

EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.

Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.

↑刃はついてないので→の替え刃とセットで買うこと

●1.5mm厚コスプレボードを楽天で買う

送料無料の5枚セット

●1.5mm厚コスプレボードをAmazonで買う

●2mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)

Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.