How to make Tenryu's equipment (with templates) - Ship part Vol.2 bridge - YOGA Cosplay(GyakuYoga) [Tutorial of Cosplay weapon,aromor,prop]



ツイート

Kantai collection -Kan Kore-
Tenryu's equipment
How to make ship part (with templates)
Vol.2 bridge

Return to Vol.1(ship body part)

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

-If accedents happens, it's self-responsibility. Keep safety environment.

Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.

Thanks, everybody!

Nov,30,24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy Fate cosplay!

Aug,6,24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!

Jun,27.24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy Rena cosplay!

More history

Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan).

I finished making the Templates.

Building
Cut material into the Templates form.
Cut out 10mm thick EVA foam.
The symbols in photo are parts name of templates.

EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.

Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.

↑刃はついてないので→の替え刃とセットで買うこと

●10mm厚コスプレボードを楽天で買う

●10mm厚コスプレボードをAmazonで買う

●10mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)

Mark holes on the Templates.

I finished marking.

Cut out to make a hollow.

Shift the position. Glue with a Liquid super glue.

I finished glueing.

Make a hole with a Box cutter etc.

Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)

Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.

When you use 100ml, you can make a armorset or about two, three weapons.

Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.
Glue Cloth or Synthetic leather on points with burdens.

ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい！

Cut material into the Templates form.
Cut out 5mm thick EVA foam.

●5mm厚コスプレボードを楽天で買う

送料無料の5枚セット

●5mm厚コスプレボードをAmazonで買う

●5mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)

Glue with a Liquid super glue.

Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.
Glue Cloth or Synthetic leather on points with burdens.

Glue with a Liquid super glue.

Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)