VAMPIRE savior、Darkstalkers 3
Lilith,Morrigan
How to make wasit wing (with templates)


Materials
[Materials for making templates]
-Drawing paper 10sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→10mm thick 100cm X 60cm
-Synthetic leather 100cm X 10cm
-"Bond G17"(one of sticky glue in Japan) 50ml
-Liquid super glue 5pieces
-Hot melt(glue gun) 10pieces
-Safety pin 6piece
-Fishing line 2m
-Ring form metal parts 2pieces
-Materials set for making nails(Detail is here)

[Painting materials]
1.When undercoat is Gesso
-Gesso 50ml
-Paintbrush 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.When undercoat is Wood glue thinned with water
-Wood glue 50ml
-Water a little
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of sticky glue in Japan) 50ml
-lacquer thinner 50ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
5000Yen (about 130Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Soldering iron and soldering iron stand
-Sand paper(180grit)
-Paint tools (brush etc)
-Pinvice or Prick punch etc
-Pliers
-Tools set for making nails(Detail is here)

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator

Work time
20hours

Spec
Weight 400g

Template data
PDF format(A4 size)1/2 PDF format(A4 size)2/2

How to download & print
Read this.

About commercial use
Please follow this rule.

Additional explanation
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

1/2 Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".


2/2 Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

-If accedents happens, it's self-responsibility. Keep safety environment.

Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.


Thanks, everybody!

Nov,30,24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy Fate cosplay!


Aug,6,24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!


Jun,27.24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy Rena cosplay!


More history

Make the template
Make Templates from Drawing paper.
When you want to know how to make Templates, browse this page.



Building
Cut material into the Templates form.
Cut out 10mm thick EVA foam.





EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video




Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.



↑刃はついてないので→の替え刃とセットで買うこと





●10mm厚コスプレボードを楽天で買う


●10mm厚コスプレボードをAmazonで買う


●10mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)



Use a wire.
Cut it with Pliers or Nippers.
Bend with hands and Pliers.


Paint ink.


Mark.


I finished marking.


Cut out with a Box cutter etc.


I finished cutting.
Don't dump cut one, because cut one is used after.


Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)





Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.


When you use 100ml, you can make a armorset or about two, three weapons.



I finished glueing.


Put the wire.


Glue with a Liquid super glue.


Stick cut one.
Glue with a Liquid super glue.


I finished glueing.


Cut unnecessary points with Box cutter etc.


I finished cutting.


Stick together another one.
Glue with a Liquid super glue.


Cut material into the Templates form.
Cut out 10mm thick EVA foam.


Make a gap with a Box cutter etc.
Glue with a Liquid super glue.


Glue with a Liquid super glue.


I finished glueing.


Form by shaving with a Box cutter etc.


Form by shaving with a Box cutter etc.


Form by shaving with a Box cutter etc.


Form by shaving with a Box cutter etc.


Form by shaving with a Box cutter etc.


Form by shaving with a Box cutter etc.


Polish with a 180grit Sand paper.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)


Polish with a 180grit Sand paper.
Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)


Make a break with a Box cutter etc.


Cut out Synthetic leather.


Pust it to the depth.
Put Safety pin between Synthetic leather.


Glue with a Liquid super glue.


Cut out Synthetic leather.


Glue with a Liquid super glue.


Stick together red an blue Synthetic leather.


Glue Synthetic leather with "Bond G17"(one of sticky glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


チューブ入り(箱入り)の方が使い勝手はいいですが、缶入りの方がコスパは断然良いです。

Cut material into the Templates form.
Cut out Synthetic leather.
In this time, cut widely 3 mm than Templates.(Make it a tab for sticking)


Cut out Synthetic leather.
In this time, cut widely 3 mm than Templates.(Make it a tab for sticking)


I finished cutting.


Make a break with a Box cutter etc.


Make a break with a Box cutter etc.


Make a gap with a Box cutter etc.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


I finished glueing.


Stick Masking tape on the point you don't want to paint.


I finished sticking.



Please follow and donate
Please follow my twitter.


Please donate me.


Painting
Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.


1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities　page】
Gesso or Black Gesso
黒いジェッソと詰替えパック


白いジェッソと詰替えパック



2.Wood glue thinned with water
This is so easy.

【Merit】
-Someone can get
-Someone can use easy

【Demerit】
-Drying time is a little long.

【Commodities　page】


3."Bond G17"(one of liqud glue in Japan)
This is dangerous method, it's most likely happening fire.
I wrote about this method as a archive,
However I don't recommend this.
I don't use this method now, I use other method now.
If accedents happens, it's self-responsibility.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Commodities　page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner

チューブ入り(箱入り)の方が使い勝手はいいですが、缶入りの方がコスパは断然良いです。



-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.


・About mask
In spray painting or lacquer painting, use a mask for painting.
←フィルタ付きセット商品 ←替えフィルタ


I use "Zoukei be-su" as undercoat this time.
But it's sold only in Japan.
Substitute Gesso or Wood glue thinned with water.


Paint "Zoukei be-su" twice with a brush.
Dry it about 2 ~ 6 hours.


Paint gray color as undercoat color with Lacquer Spray.


Paint red color with Lacquer Spray.


Actually, I used a Airbrush too.
If you want to make light and shade, use it.
About Airbrush is here.





●初心者にオススメ
安価なUSB充電式エアブラシ。
これ一つでエアブラシ塗装が手軽に行えます。
エアブラシ塗装を手軽に始めるならまずはこれ。


●ギャクヨガが使っている物を使いたいなら
性能は高いですが本格的です。
左がエアブラシ本体、右が空気を送り出す装置で両方必要です。


Peel Masking tape softly.
Cut the point hard to peel with scissors.


After painting
Make hole with a Pinvice or Prick punch etc.



Attach nails.
Glue with a Liquid super glue.
How to make nails is here.


I finished glueing.


Make hole with a Pinvice or Prick punch etc.


Tie Fishing line.


Tie Ring form metal parts.


Complete
















How to fit.
Cut out Synthetic leather.


Fit with Safety pin.


Fit with Safety pin.
(You may Fitting it to cloth directly. But Fitting between Synthetic leather is easy more.)


Hang the ring with finger, when you strike pose.


Visitor's works
こもさん
リリス
ヴァンパイアセイヴァー
レオタードはプレデターラットの限定品(まだ売ってるよ)、翼はギャクヨガさんの型紙で製作。
先日大失敗したウィッグとマラボーとメイク見直しました。
去年まではグラマラスなキャラが多かったのですが、今年はこんな感じでさらに無理していきます。


しんげんもちさん
モリガンコス作りました?自撮りしかないです??スタジオ撮影したいです。
羽根型紙→ギャクヨガ様
レオタード型紙→うさこ様@yousaikoubou
を使わせていただきました！ありがとうございます


あきさん
こんばんは。となこすにて、ギャクヨガ様の型紙を使わせていただきました、リリスです。
会場で、とても評判が良かったです。ありがとうございました^_^


がちゃ丸さん
紅魔館あわせ本当楽しかったー！！
あげたい写真あり過ぎるから選びきれない！！ぱちぇこあ健全版よりw
羽はギャクヨガさんのサイトを参考にさせていただきました
お写真はtakeさん


Please follow Twitter


About using for business
When you use my contents for business, follow this rule.