Real Oni Gokko
How to make Oni's mask (with templates)



Watch tutorial video at first


Materials
[Materials for making templates]
-Drawing paper 10sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→3mm thick 100cm X 10cm
→5mm thick 100cm X 30cm
→10mm thick 100cm X 20cm
-Clear red color plastic sheets 100cm X 10cm
-Liquid super glue 3pieces
-Hot melt(glue gun) 10pieces
-Elastic cord 1piece
-LED valve for cars 2pieces
-12V Battery 1piece
-Lead wire, Switch, Battery case etc

[Painting materials]
1.When undercoat is Gesso
-Gesso 50ml
-Paintbrush 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

2.When undercoat is Wood glue thinned with water
-Wood glue 50ml
-Water a little
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

3.When undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of sticky glue in Japan) 50ml
-lacquer thinner 50ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
3000Yen (about 130Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Soldering iron and soldering iron stand
-Paint tools (brush etc)

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator

Work time
6hours

Spec
Weight 130g

Template data
PDF format(A4 size)

How to download & print
Read this.

About commercial use
Please follow this rule.

Additional explanation
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Size:Free size
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

Completion image
Caution Bellow photo is a image photo aftet completing.
Caution Don't print bellow photo.
Caution Read "How to print".


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

-If accedents happens, it's self-responsibility. Keep safety environment.

Please support me by donation
If my tutorials supported you, please support me.
You can donate me with credit cards or PayPal etc.
I'm gonna use donation to make new props.
The donation method is displayed by clickking this banner.


Thanks, everybody!

Nov,30,24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy Fate cosplay!


Aug,6,24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!


Jun,27.24
Thanks for donation by YouTube's SUPER THANKS!
I'm so happy my video helped you!
Please enjoy Rena cosplay!


More history

Make the template
Make Templates from Drawing paper.
When you want to know how to make Templates, browse this page.



When you make a ideal from, cut open it. Use it.


Building
Cut material into the Templates form.
Cut out 5mm thick EVA foam.





EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video




Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.



↑刃はついてないので→の替え刃とセットで買うこと





●5mm厚コスプレボードを楽天で買う


送料無料の5枚セット


●5mm厚コスプレボードをAmazonで買う


●5mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)



Cut it into slant with a Box cutter etc.


Mark holes on the Templates.


I finished marking.


Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)





Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.


When you use 100ml, you can make a armorset or about two, three weapons.



I finished glueing.


Cut material into the Templates form.
Cut out 10mm thick EVA foam.
Glue with a Liquid super glue.





●10mm厚コスプレボードを楽天で買う


●10mm厚コスプレボードをAmazonで買う


●10mm厚COSボード匠を楽天で買う(COSボード匠はAmazonでは売ってません)



I finished glueing.


Cut 3mm thick EVA foam thin.





●3mm厚コスプレボードを楽天で買う




送料無料の5枚セット


●3mm厚コスプレボードをAmazonで買う


※COSボード匠は3mm厚の商品は存在しません


Glue with a Liquid super glue.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)



Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.


ギャクヨガが愛用しているグルーガンです、口が広くてとても使いやすい!

Glue a broken piece of material. Hold it in painting.
(Cut it off after painting.)



Please follow and donate
Please follow my twitter.


Please donate me.


Painting
Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.


1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities page】
Gesso or Black Gesso
黒いジェッソと詰替えパック


白いジェッソと詰替えパック



2.Wood glue thinned with water
This is so easy.

【Merit】
-Someone can get
-Someone can use easy

【Demerit】
-Drying time is a little long.

【Commodities page】


3."Bond G17"(one of liqud glue in Japan)
This is dangerous method, it's most likely happening fire.
I wrote about this method as a archive,
However I don't recommend this.
I don't use this method now, I use other method now.
If accedents happens, it's self-responsibility.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Commodities page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner

チューブ入り(箱入り)の方が使い勝手はいいですが、缶入りの方がコスパは断然良いです。



-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.


・About mask
In spray painting or lacquer painting, use a mask for painting.
←フィルタ付きセット商品 ←替えフィルタ


I use Gesso in this tutorial.


Paint Gesso twice or three times with a brush.
Dry it about 2 ~ 6 hours.


Paint black with Lacquer Spray.


Paint silver Bottle lacquer paint with a paint brush.


When you paint Bottle lacquer paint, use thinner, sticks for mixing, brushes, cups.





After painting
Make lighting eyes.
Use a LED valve for cars.
It lights, when it's connected a 12V Battery. Detailes are here.
I used this page's one.



Cut out Clear color plastic sheets.
Glue with a Liquid super glue.



I finished glueing.


Cut out Clear red color plastic sheets.


Glue with a Liquid super glue.


Cut out Clear red color plastic sheets.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


I finished glueing.


Glue with a Liquid super glue.


Solder left and right eyes.
*Don't share Soldering iron for EVA foam and Soldering iron for soldering.
Soldering iron becomes unusable.




ギャクヨガが使っているハンダゴテです、安全の為に台も買いましょう。

Solder left and right eyes.


Solder Lead wire, a Switch, a Battery case.
The Battery case is a 12V case or N size case.



Solder them.


Solder them.


I finished soldering.


Glue with a Hot melt(glue gun).


Cut Elastic cord.



Glue with a Hot melt(glue gun).


Set a 12V Battery.
You can change the battery anytime.


Complete


Please watch the tutorial video too.












Please follow Twitter


About using for business
When you use my contents for business, follow this rule.