MAIL
I have facebook.
I'm writting about new props in English.

How to strike Snap

-About Snap
Snap is metal fitting. It's fitted bags and wallets.

-Store:leatherwork shops
-Price:200Yen (about 100Yen = 1dollar)



Special tools are needed for striking Snap.
The first is stands.
-Store:leatherwork shops
-Price:1000Yen (about 100Yen = 1dollar)


The 2nd is stick for striking
-Store:leatherwork shops
-Price:500Yen (about 100Yen = 1dollar)


Snap is composed of 4parts.
"A" and "B" is a set. "C" and "D" is a set.




-How to strike
Make hole with Punch.
←手で押しこむだけでお手軽なタイプ←ハンマーで叩くタイプ

Let A thing paired with "A" and "B", A thing paired with "C" and "D", pass to the hole.
Strike points shown by red cursol with stick.


In the case of "A+B", use backside of the stand.


In the case of "C+D", use backside of the stand.


Strike stick with a hammer


Attaching was completed.


supplementation
Fitting Snap to EVA foam as it is is bad.


It will be broken.


Paste Synthetic leather to backside for prevention bareaking.
Paste Synthetic leather with "Bond G17"(one of liqud glue in Japan).






-Example
A holster.
*How to make this example is here.


it's fitted Snap on the beltloop.


A belt and a pouch.
*How to make this example is here.


They can put on and take off with Snap.


Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

Return to Top page