Nov.7
My Youtube channel moved this URL.
New Youtube Channel
Please subscribe again.
I'll upload videos this channell after this.
My profile

Fit parts made of EVA foam with Velcro

-Fit parts to clothes
There are two ways fitting parts to cloths.
They are using Safety pins and using Velcro.

Fitting with Velcro is easy to fit.

-Velcro you should use
There are two kinds of Velcro.
-Velcro for sewing, it has nothing at backside
-Seal type Velcro, it has pastes at backside

UseVelcro for sewing.


-How to paste to "Lion Board(Koyo Soft Board)"
Paste Hot melt(glue gun) evenly to backside.



Make flat by stroking with the tip of Hot melt(glue gun).


Toast with Lighter.


Toast until appering a little bubbles in this way.


Push with fingers evenly and paste.


Paint Hot melt(glue gun) to gaps of four sides.


Complete.


-Attach Velcro witout sewing clothes
If you can't sew Velcro to clothes, sew Safety pins on Velcro.
Attach this on clothes.
Or attach directly on clothes with Safety pins.


-How to paste to Synthetic leather
It's hard to paste on slippy things with Hot melt(glue gun)
In case of that, make pasting well by roughing to surface with Box cutter.

For example, this Synthetic leather.


Roughen to surface with Box cutter.


Paste Velcro like above precess.


-Examples
Paste Velcro with Hot melt(glue gun).


Sew Velcro with a sewing machine.


Ftting state.
*How to make this example is here.


This is othere example.
White Velcro is pasted.
(Surrounded part by red circle)


Clothes side.
White Velcro is sewed.
(Surrounded part by red circle)


Fitting state.
*How to make this example is here.


Bodyaromor.
*How to make this example is here.




Gauntlet
*How to make this example is here.




Shin armor.
*How to make this example is here.




Shoulder armor.
Hang down from shouldar part in body, and fit there.
*How to make this example is here.




Shoulder armor.


*How to make this example is here.


Shoulder armor.


*How to make this example is here.


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Return to Top page