MAIL
I have facebook.
I'm writting about new props in English.

Abount "Bond G17 painting"

-Paint undercoat, then improve quality
Paint.
When you paint "Lion Board(Koyo Soft Board)", You can improve quality as follows
by painting the undercoat beforehand.

-Color becomes well.
-Painting becomes hard to come off.
-Gloss comes out well.(If you don't need gloss, you use no gloss paint.
-You can save quantity of the paint.

If you don't use undercoat, you can paint.
If you hope more quality, you sholud use it.

-Paint "Bond G17"(one of liqud glue in Japan) as undercoarts
This method spread smel of thinner. Use this way if you don't spread smell of thinner.

One of necessary thing is "Bond G17"(one of liqud glue in Japan).



And lacquer thinner.



Mix "Bond G17"(one of liqud glue in Japan) and lacquer thinner in ratio of 3:2 or 3:1.
Ratio is good even rough ratio. It's standart to drip from tip of brush.
Use bowls or a paper cups as vessels. It's good to fit a faucet to a mouth of lacquer thinner.



Paint 3 or 4 times with brush.
When you paint once, desiccate for from 15 to 30minutes. Afterwards paint agein.
In passiton, It's necessary to disposable brush.
If you don't use brush painted "Bond G17"(one of liqud glue in Japan) number hours, put it in water.


Don't use fire after painting. Don' use Lighter. The parts became charred in seconds.


3. Desiccate for 4 or 5 hours.(It may become dry for 1 or 2 hours, but Desiccating for 4 or 5 hours is better.)

Paint Lacquer Spray and Bottle lacquer paint.


Complete.
Lacquer paint desiccated immediatel and you may touch it.
But disappering smell of lacquer need about 3days.
Then put on point ventilation is good.
*How to make this example is here.


Watch moive.


Other examples.

It's desiccating after painiting thined "Bond G17"(one of liqud glue in Japan).


After paiting.
*How to make this example is here.


It's desiccating after painiting thined "Bond G17"(one of liqud glue in Japan).


After painting.
*How to make this example is here.


Supplementation1
Use thined one in above process.
But use one not thined by your liking.
In the case of that, surface beacomes roughly.
Details are here.

Supplementation2
Creases apperd in movable points, when you wear in many times.
But you can look only cloth.Don't mind.
I find more better way everyday.


-Paints you should use
[Lacquer spray]
-Store:D.I.Y shop
-Price:200Yen (about 100Yen = 1dollar) ~ 800Yen (about 100Yen = 1dollar)



[Lacquer spray for hobby]
-Store:toy shops
-Price:500Yen (about 100Yen = 1dollar)



[Bottle lacquer paint]
-Store:toy syops
-Price:120Yen (about 100Yen = 1dollar)

These are popular paints for painting plastic models in Japan.
The commodity of this photo is Japanese commodity.
But, I think there must be similar things in outside of Japan.



-Tools used in painting
Details are here.

Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

Return to Top page

Profile

MAIL