MAIL
I have facebook.
I'm writting about new props in English.

Dig patterns to "Lion Board(Koyo Soft Board)"

-Dig lines with soldering iron
When you dig patterns to "Lion Board(Koyo Soft Board)", use Soldering iron.
This is Soldering iron. A tipget heats when a power cord is connected.
A original use is soldering.
There are various wattage. Size of tips are different between wattage.
30wat is most generic.At first you must buy a 30wat commodity.


Use together a stand basicly when you use Soldering iron.
A sponge is for cooling. Before using Soldering iron, wet the sponge.


Body
-Store:D.I.Y shop
-Price:1000Yen (about 100Yen = 1dollar)

Stand
-Store:D.I.Y shop
-Price:700Yen (about 100Yen = 1dollar)


Watch movie.


Gasses come out when "Lion Board(Koyo Soft Board)" is melted.
You must wear a mask and You make ventilation good in the time of using.

-Example
Dig scales with Soldering iron.
(Don't breathe smoke,don't let smoke meets eyes)


After painting.
*How to make this example is here.


These lines are digged with Soldering iron.
*How to make this example is here.


Soldering iron having a thin tip.
This is a commodity of 23wat.
The tip is considerably thin.



It's good to dig small letters.


After painting.


If you don't have a soldering iron.
It's also good diggin with Box cutter.
But, You should be carefull about cutting too much.


Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

Return to Top page

Profile

MAIL