MAIL
I have facebook.
I'm writting about new props in English.

Expressive style of "Lion Board"
It becomes more real, if you are carefull in sufaces, when you make aromors and weapons.
I comment about some expressive styles.

-Style of castings (Surface is very rough)


Paint "Bond G17"(one of liqud glue in Japan) with paintbrush.
Normaly it's thined with lacquer thinner. But don't thin.





Strike with paintbrush softly after painting. Then the surface becomes more roughu.
Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner at 3 or 4 times.
Don't use fire after painting. Don' use Lighter. The parts will be charred in seconds.
Desiccate for 4 or 5 hours.(It may become dry for 1 or 2 hours, but Desiccating for 4 or 5 hours is better.)


Paint Lacquer Spray and Bottle lacquer paint.
Complete.
*How to make this example is here.


-Style of castings (Surface is somewhat rough)


Paint "Bond G17"(one of liqud glue in Japan) thined with a little lacquer thinner.
(Normaly ratio is 1:1. but ratio is 3:1 or 4:1 in this time.)





Paint it about 2times.
Strike with paintbrush softly after painting. Then the surface becomes more roughu.
Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner at 3 or 4 times.
Don't use fire after painting. Don' use Lighter. The parts will be charred in seconds.
Desiccate for 4 or 5 hours.(It may become dry for 1 or 2 hours, but Desiccating for 4 or 5 hours is better.)


Paint Lacquer Spray and Bottle lacquer paint.
Complete.
*How to make this example is here.


-Style of crabs


Make surface like crabs.
Make Broke piece of "Lion Board(Koyo Soft Board)" scrap.
Mix scraps and "Bond G17"(one of liqud glue in Japan).



Paint mixed one twice with brush.
Don't use fire after painting. Don' use Lighter. The parts will be charred in seconds.
However don't paint to parts made by Plastic sheets.
Desiccate for 4 or 5 hours.(It may become dry for 1 or 2 hours, but Desiccating for 4 or 5 hours is better.)


Paint Lacquer Spray and Bottle lacquer paint.


Complete.
*How to make this example is here.


*How to make this example is here.


-Style of skin of monsters


Reproduce characteristic skin.
Mix a paper cray and "Bond G17"(one of liqud glue in Japan).



Paint mixed one.
Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner at 3 or 4 times.
Don't use fire after painting. Don' use Lighter. The parts will be charred in seconds.
Desiccate for 4 or 5 hours.(It may become dry for 1 or 2 hours, but Desiccating for 4 or 5 hours is better.)


Paint Lacquer Spray and Bottle lacquer paint.


Complete.
*How to make this example is here.


Process other parts simiraly.


Complete.
*How to make this example is here.


Process other parts simiraly.


Complete.
*How to make this example is here.


Process other parts simiraly.


Complete.
*How to make this example is here.


-Style of Blocks


Mix "Resin sand" and Gel medium in the ratio of 1:1.
"Resin sand" is a undercoat of acrylic paint. It can maek a rough surface.

-Store:Art supplies shop
-Price:400Yen (about 100Yen = 1dollar)`
It's sold all over the world.

It's hard to paint if you use only "Resin sand".
Then mix Gel medium.



Paint it.
Desiccate for 4 or 5 hours.(It may become dry for 1 or 2 hours, but Desiccating for 4 or 5 hours is better.)


Paint Lacquer Spray and Bottle lacquer paint.
Complete.
*How to make this example is here.


There are many undercoats for acrylic paint in except "Resin sand".
For example, "Ceramic stucco".
Mix it and Gel medium. And paint.



Finish is like castings.
*How to make this example is here.


There are some samples of undercoats in Art supplies shop.
Please go and watch.

-Grotesque


Paint Hot melt(glue gun) on the whole easily.
Painting is by your liking.



Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

Return to Top page