MAIL
I have facebook.
I'm writting about new props in English.

Write patterns and reinforce with Hot melt(glue gun)

Using Hot melt(glue gun) is most easy, when you write patterns to "Lion Board(Koyo Soft Board)".
Details of Hot melt(glue gun) are here.



-Example Kneearmor
Write patters with Hot melt(glue gun).


After painting.
*How to make this example is here.


-Example Plate
Make like a rivet with Hot melt(glue gun).


After painting.
*How to make this example is here.


-Example Sword with scales.
Serve with Hot melt(glue gun) like scales.


After painting.
*How to make this example is here.


-Example Grotesque scythe
Paint on the whole with Hot melt(glue gun).


After painting.


-Use for reinforce
Serve Hot melt(glue gun) as reinforce to backside of place pasting together "Lion Board(Koyo Soft Board)".


I made parts like a feather with 2mm(1.5mm is also OK) thick "Lion Board(Koyo Soft Board)".
But they may be broken if the same.
Then, Serve Hot melt(glue gun) as reinforce to backside.


Parts severd Hot melt(glue gun) is not shown from front side.


There is also usage of meling stick and pouring for reinforce.
Gas stove is good as a source of heat. Use Electric stove., if you don't want to ditry a kitchen.

-Store:electrical appliance store
-Price:2000Yen (about 100Yen = 1dollar)



Heat Hot melt(glue gun) with Electric stove and melt.


Pour melted Hot melt(glue gun) in inside of grip.


-Make cleare jewel parts.
Make form like jewel with cleare color Hot melt(glue gun).


Paint clear red color of Bottle lacquer paint with paintbrush.


A finish is like a the translucent jewel.
*How to make this example is here.


-About paint
You may worry about painting to points used Hot melt(glue gun).
Don't worry.
There are no problems, if you way of painting showed on my sites

Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

Return to Top page