EVA foam is soft material.
You can process it easily.
Other names are EVA board, EVA zote, Craft foam etc.
Cosplayers all over the world use this.
It's sold in Amazon or AliExpress etc.

Introduction video




Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

I always use "Running fire box cutter","Blade breaker",Cutting mat.
"Blade breaker" can break the blade easily.


Use Standard art knife or Cushion grip art knife to cut small ornaments etc, too.
Standard art kinfe is for 1.5mm thickness and 3mm thickness.
Cushion grip art knife is for 5mm thickness and 10mm thickness.

●10mm厚コスプレボードを楽天で買う

コスプレボード 白10mm×660mm×500mm 価格：880円（税込、送料別) (2019/10/23時点)

コスプレボード　白10mm×660mm×1000mm 価格：1540円（税込、送料別) (2019/10/23時点)

コスプレボード　黒10mm×660mm×1000mm 黒だから裏塗り処理を省略出来る 価格：2486円（税込、送料別) (2019/10/23時点)

●10mm厚コスプレボードをAmazonで買う

COSボード匠 Sサイズ 10mm厚 白 価格：1,400円（税込、送料別) (2023/5/25時点)

COSボード匠 Mサイズ 10mm厚 白 価格：2,490円（税込、送料別) (2023/5/25時点)

COSボード匠 Sサイズ 10mm厚 黒 価格：1,400円（税込、送料別) (2023/5/25時点)

COSボード匠 Mサイズ 10mm厚 黒 価格：2,490円（税込、送料別) (2023/5/25時点)

Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)





Super glue accelerator makes hardening time short.
It's so useful.
Watch this video.


When you use 100ml, you can make a armorset or about two, three weapons.
←100ml ←420ml


Form by shaving with a Box cutter etc.


Glue with a Liquid super glue.


Make the edges smooth with a Soldering iron (Don't breathe in the smoke, be careful a burn).
Or, cut it by edged tools.
(Actually I used fire, but it's dangerous method. I recommend a Soldering iron
If accedents happens, it's self-responsibility)


Make hole with a Soldering iron.
(Don't breathe in the smoke and don't put in eyes. If accedents happens, it's self-responsibility.)


ギャクヨガが使っているハンダゴテです、コテ台付き。

Glue with a Liquid super glue.


Glue maglnets to fix a arrow.


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.

●1.5mm厚コスプレボードを楽天で買う

コスプレボード　白1.5mm×660mm×1000mm 価格：605円（税込、送料別) (2019/10/23時点)

コスプレボード　黒1.5mm×660mm×1000mm 黒だから裏塗り処理を省略出来る 価格：660円（税込、送料別) (2019/10/23時点)

コスプレボードシール　白1.5mm×660mm×500mm 接着剤不要のシール接着、装飾等に 価格：594円（税込、送料別) (2019/10/23時点)

コスプレボードシール　黒1.5mm×660mm×500mm 接着剤不要のシール接着、装飾等に 価格：682円（税込、送料別) (2019/10/23時点)

●1.5mm厚コスプレボードをAmazonで買う

COSボード匠 Sサイズ 2mm厚 白 価格：620円（税込、送料別) (2023/5/25時点)

COSボード匠 Mサイズ 2mm厚 白 価格：1,000円（税込、送料別) (2023/5/25時点)

COSボード匠 Lサイズ 2mm厚 白 価格：4,000円（税込、送料別) (2023/5/25時点)

COSボード匠 Sサイズ 2mm厚 黒 価格：620円（税込、送料別) (2023/5/25時点)

COSボード匠 Mサイズ 2mm厚 黒 価格：1,000円（税込、送料別) (2023/5/25時点)

Stick Masking tape on the point you don't want to paint.


ギャクヨガは細かいところは10mm幅(左の商品)、広い所は30mm幅(右の商品)を使ってます


Please follow and subscribe
Please follow my Facebook & twitter!


Please subscribe my channel!


Painting
Begin painting.
At first, paint undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.


1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities　page】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or

2.Wood glue thinned with water
This is so easy.

【Merit】
-Someone can get
-Someone can use easy

【Demerit】
-Drying time is a little long.

【Commodities　page】


3."Bond G17"(one of liqud glue in Japan)
This is dangerous method, it's most likely happening fire.
I wrote about this method as a archive,
However I don't recommend this.
I don't use this method now, I use other method now.
If accedents happens, it's self-responsibility.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity. Then you can't get it easily.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Commodities　page】
"Bond G17"(one of sticky glue in Japan) thined with lacquer thinner
&

-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.


・About mask
In spray painting or lacquer painting, use a mask for painting.
↑フィルタ付きセット商品 ←替えフィルタ


I use Gesso in this tutorial.


Paint Gesso twice or three times with a brush.
Dry it about 2 ~ 6 hours.


Paint black color as undercoat color with Lacquer Spray.


Paint silver Bottle lacquer paint with a paint brush.


When you paint Bottle lacquer paint, use a paintbrush, cups, panint sticks, thinner.



Paint Bottle lacquer paint with a paint brush.


Paint Bottle lacquer paint with a paint brush.


After painting
Glue with a Liquid super glue.


Paint Bottle lacquer paint with a paint brush.


Complete


Please watch the tutorial video too.








The arrow is attached with magnets.


Please follow Twitter
Tweets by gyakuyoga

About using for business
When you use my contents for business, follow this rule.