MAIL
I have facebook.
I'm writting about new props in English.

.hack//Link
Atori's weapon2
How to make Magic



Materials
[Materials for making templates]
-Drawing paper 10piece
-"Kousakuyousi"(one of hard paper in Japan) 5piece
-Scotch tape(Sellotape) 1piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→5mm thick 100cm X 50cm
-Plastic sheets 0.5mm thick 2piece
-Clear platic ball 2piece
-Liquid instant glue 5piece
-Hot melt(glue gun) 20piece(When you use a Air duster for cooling, it's convenient))
-"Jiyujizai"(one of wire in Japan)
→10mm 50cm
→3.2mm 50cm
-Aluminum stick 1piece
-PVC pipe(diameter 26.0mm) 1piece
-Stick for jointing PVC pipe 25cm

[Painting materials]
1.When a undercoat is Gesso
-Gesso 150ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 300ml
-lacquer thinner 300ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
4000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Saw or Pipe cutter
-Sand paper1piece
-Paint tools, such as a paintbrush
-Drill or Pinvice
-Pliers

Convenient tools when you have
-Art knife PRO
-Heat gun
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
←100ml ←180ml ←420ml

Work time
40Hours

Spec
Weight 600g
Length 160cm

Template
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Make a ball.
Use clear plastic ball.
Make hole with a Drill or a Pinvice.



Heap Polyester putty on the joint etc.

←120g ←1kg

Polish heaped points with about 120 ~ 400 grit sand paper.


Stick Masking tape on the whole.
Write eye pattern.



Make breaks to painted points and peel.


Paint green color with Lacquer Spray.


Stick Masking tape on point painted green.


Sticking was completed.


Paint white color with Lacquer Spray.


Peel Masking tape softly.


Paint one more ball.


Paint green color with Lacquer Spray.


Stick Masking tape to point painted green.
Paint ocher color with Lacquer Spray.


Peel Masking tape softly.


Make petals.
Make Templates from Drawing paper.



Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【5mm厚COSボードを楽天で買う】


【5mm厚COSボードをネット通販で買う】


**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Shave the corner with a Box cutter.


Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)

**********************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

**********************************************************************


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)

←ガス充填式ライターとガスボンベを使うとお得

Make wings.
Make ground plan from "Kousakuyousi"(one of hard paper in Japan).



Make Templates by enfleshing Drawing paper on the ground plan.


Repeat cutting and pasting.


When you make a ideal from, cut open it. Use it.
When you want to know detailed tutorial of making Templates, browse this page.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Bend by heating with a Lighter or a Heat gun.



Glue with a Liquid instant glue.


Paste "Jiyujizai"(one of wire in Japan) 10mm diameter. Glue with a Hot melt(glue gun).

←様々な太さ有り



Glue with a Liquid instant glue.


Glueing was completed.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Make a cylinder.
Cut out 5mm thick EVA foam.


Glue with a Liquid instant glue.


Use a PVC pipe(diameter 26.0mm).
Cut a PVC pipe.
PVC pipe can be cut with a saw.
But a Pipe cutter is more better.
It can cut quickly and neatly.



When you use this, joint with a stick.


Make a stick.
The best length is 25cm.
There are two methods.
-------------------------------------------------------------------------------------------
1.Iron gardening stick and EVA foam
It's take time, however jointing power is strong.

Cut Iron gardening stick. How to cut is here.
Cut out 2mm or 1.5mm thick EVA foam.
Glue with a Liquid instant glue.

-------------------------------------------------------------------------------------------
2.Wood stick
It's a easy method, but jointing power is weak than above method.

Cut a wood stick with a saw.
Shave it with Box cutter as necessary.

-------------------------------------------------------------------------------------------

Cut out 2mm or 1.5mm thick EVA foam.
Paste with "Bond G17"(one of liqud glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(You may glue with a Liquid instant glue. However "Bond G17"(one of liqud glue in Japan) is useful for the large area.)


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【1.5mm厚COSボードを楽天で買う】


【1.5mm厚COSボードをネット通販で買う】




Glueing was completed.


Dig a pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)
Cut out 5mm thick EVA foam.
Glue with a Liquid instant glue.



Paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan). (Moving parts in particular)
-It can't use for PVC pipe or plastic sheets.

【Recommendation】
-Weapons
-Armors without a moving part.

【Undercoat】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2.Thinned "Bond G17"(one of liqud glue in Japan)
This is difficult.

【Merit】
-It's sold in D.I.Y shops.
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-You must thin it.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Recommendation】
-All props
(Props with a moving part in particular)

【Tutorial video】


【Undercoat】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things

【Paint】
Lacquer Spray or Bottle lacquer paint

-------------------------------------------------------------------------------------------

I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial.
But I recommend Gesso for begginers.
*When you use Gesso, don't paint it on the PVC pipe. Beforehand do this process.
Or glue Synthetic leather with "Bond G17"(one of liqud glue in Japan).


Stand it with a wood struck big nails.


Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Dry it about 2 ~ 6 hours.


Paint white color as undercoat color with Lacquer Spray.


Paint with Lacquer Spray.


Paint with Lacquer Spray.


Stick Masking tape on the point you don't want to paint.


Paint with Lacquer Spray.


Actually, I used a Airbrush.
If you want to make light and shade, use it.
About Airbrush is here.

←初心者にもオススメのセット、私も愛用してます。

Glue with a Hot melt(glue gun).


Cut out 0.5mm thick Plastic sheets to ring form.
Paste 3.2mm diameter "Jiyujizai"(one of wire in Japan) Glue with a Hot melt(glue gun).



Make hole to cylinder and inner.
Make hole with a Drill or a Pinvice.
Make construture can be put on and take by inserting "Jiyujizai"(one of wire in Japan).


Make construture can be put on and take off wings.
Make holes. Bend 3.2mm diameter "Jiyujizai"(one of wire in Japan) to "U" form.
Glue with a Liquid instant glue.


There are pockets made by cloth in over the hole.


Cut out 0.5mm thick Plastic sheets to ring form.
Glue the Aluminum stick.
Glue with a Hot melt(glue gun).


Make hole to cylinder and inner.
Make hole with a Drill or a Pinvice.
Make construture can be put on and take by inserting "Jiyujizai"(one of wire in Japan).


Equipping state.



Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
Click this↓ And Click "subscribe".

















分割状態。


Return to Top page