MAIL
I have facebook.
I'm writting about new props in English.

.hack//Link
Atori's weapon1
How to make Magic



Materials
[Materials for making pattern paper]
-Drawing paper 10piece
-"Kousakuyousi"(one of hard paper in Japan) 5piece
-Scotch tape(Sellotape) 1piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→5mm thick 100cm X 50cm
-Liquid instant glue 5piece
-Clear platic ball 2piece
-Hot melt(glue gun) 10piece(It's convenient if there is also Air duster for cooling))
-PVC pipe(diameter 18.0mm) 1piece
-Stick for jointing PVC pipe 25cm

[Painting materials]
1.When a undercoat is Gesso
-Gesso 150ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 300ml
-lacquer thinner 300ml
-Paintbrush(Disposable premise ) 1piece
-Paper cup,bowl etc.(Disposable premise ) 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*Paiting are is written in the package, refer it. Detail is here.

Materials cost
3000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Sizzer
-Box cutter(It's good to change "Pro blade". Moreover,It will become convenient if there is also "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Saw(Pipe cutter is also OK)
-Sand paper1piece(about 120grid)
-Paint tools, such as a paintbrush

Convenience tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly.
It's so useful for glueing small part. Detail is here.
←100ml ←180ml ←420ml

Work time
30Hours

Spec
Weight 500g
Length 120cm

Templates
I threw away the Templates, so It's can't upload.

Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

How to make
Make a ball.
Use clear plastic ball.


Heap Polyester putty on the joint etc.

←120g ←1kg

Polish heaped points with about 120 ~ 400 grit sand paper.


Stick Masking tape on the point you don't want to paint.



Paint green color with Lacquer Spray.


Stick Masking tape to point painted green.
Paint ocher color with Lacquer Spray.


Peel Masking tape softly.


Make petals.
Make Templates from Drawing paper.



Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私がライオンボードを使う場合はリアラボードという商品名の物を使用しています。
こちらは通常&特大サイズ。お買い得な複数枚セット商品も有り。


ハーフサイズ。お買い得な複数枚セット商品も有り。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買うなら】


【5mm厚COSボードをネット通販で買う】


【5mm厚COSボードを楽天市場で買う】


**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Shave the corner with a Box cutter.


Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


*******************************************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

*******************************************************************************************


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)

←ガス充填式ライターとガスボンベを使うとお得

Make a cylinder.
Cut out 5mm thick EVA foam.


Glue with a Liquid instant glue.


Make a stick part.
Use a PVC pipe(diameter 26.0mm).
Cut a PVC pipe.
PVC pipe can be cut with a saw.
But a Pipe cutter is more better.
It can cut quickly and neatly.



When you use this, joint with a stick.


Make a stick.
The best length is 25cm.
There are two methods.
-------------------------------------------------------------------------------------------
1.Iron gardening stick and EVA foam
It's take time, however jointing power is strong.

Cut Iron gardening stick. How to cut is here.
Cut out 2mm or 1.5mm thick EVA foam.
Glue with a Liquid instant glue.

-------------------------------------------------------------------------------------------
2.Wood stick
It's a easy method, but jointing power is weak than above method.

Cut a wood stick with a saw.
Shave it with Box cutter as necessary.

-------------------------------------------------------------------------------------------

Cut out 2mm or 1.5mm thick EVA foam.
Paste with "Bond G17"(one of liqud glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(You may glue with a Liquid instant glue. However "Bond G17"(one of liqud glue in Japan) is useful for the large area.)


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私がライオンボードを使う場合はリアラボードという商品名の物を使用しています。
こちらは通常&特大サイズ。お買い得な複数枚セット商品も有り。


ハーフサイズ。お買い得な複数枚セット商品も有り。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買うなら】


【1.5mm厚COSボードをネット通販で買う】


【1.5mm厚COSボードを楽天市場で買う】




Glueing was completed.


Dig a pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)
Cut out 5mm thick EVA foam.
Glue with a Liquid instant glue.
Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)



Paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan). (Moving parts in particular)
-It can't use for PVC pipe or plastic sheets.

【Recommendation】
-Weapons
-Armors without a moving part.

【Undercoat】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2.Thinned "Bond G17"(one of liqud glue in Japan)
This is difficult.

【Merit】
-It's sold in D.I.Y shops.
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-You must thin it.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)

【Recommendation】
-All props
(Props with a moving part in particular)

【Undercoat】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things

【Paint】
Lacquer Spray or Bottle lacquer paint

-------------------------------------------------------------------------------------------

I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial.
But I recommend Gesso for begginers.
*When you use Gesso, don't paint it on the PVC pipe. Beforehand do this process.
Or glue Synthetic leather with "Bond G17"(one of liqud glue in Japan).


Stand it with a wood struck big nails.


Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Paint white color as undercoat color with Lacquer Spray.


Paint with Lacquer Spray.


Stick Masking tape on the point you don't want to paint.


Paint with Lacquer Spray.


Glue the parts.
Glue with a Hot melt(glue gun).



Glue with a Hot melt(glue gun).


Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
Click this↓ And Click "subscribe".













Return to Top page