My profile & Contact

How to make Big sword
Sengoku Musou 2(Samurai Warriors 2) - Sakon Shiima
How to make Big sword



Materials
[Materials for making templates]
-Drawing paper 10piece -"Kousakuyousi"(one of hard paper in Japan) 5piece
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→5mm thick 100cm X 60cm
-Black Synthetic leather 100cm X 10cm
-Golde Synthetic leather 100cm X 10cm
-Liquid super glue 3piece
-Hot melt(glue gun) 10piece
-PVC pipe(diameter 18.0mm) 2piece

[Painting materials]
1.When a undercoat is Gesso
-Gesso 150ml
-lacquer paint(Bottle lacquer paint,Lacquer Spray) or acrylic paint proper quantity

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 150ml
-lacquer thinner 150ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
3000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Saw or Pipe cutter
-Paint tools, such as a paintbrush

Convenient tools when you have
-Art knife PRO
-Circle cutter
-Super glue Accelerator

Work time
30Hours

Spec
-

Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.


-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make templates
Scan an illustration with a scanner and zoom it. Use it as Templates.
When you want to know how to make Templates of weapons, browse this page.


Make a core.
Use a PVC pipe(diameter 18.0mm).
Cut a PVC pipe.
PVC pipe can be cut with a saw.
But a Pipe cutter is more better.
It can cut quickly and neatly.



This is a video of cutting method of PVC pipe, bending method, jointing method.


Temporal tack two PVC pipe with Packaging tape etc.
Glue with a Hot melt(glue gun).



Cut out 10mm thick EVA foam.
Make it the size bigger than the blade.
Cut out 2 pieces.
Glue with "Bond G17"(one of liqud glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(You may glue with a Liquid super glue. However "Bond G17"(one of liqud glue in Japan) is useful for the large area.)
*After this 10mm thick EVA foam is painted gray.


**********************************************************************


コスプレ造形では主に柔らかくて曲げる事ができる板状素材を材料として使う。
様々な商品があるが、主な違いは「サイズ、厚み、カラー等の商品ラインナップ」や「表面のきめ細やかさ」等である。
加工の仕方はどの商品も概ね同じである。
コスプレイヤーがよく使う商品をいくつか紹介する。

1.COSボード
クラッセが販売する商品。
従来販売されていた他社製品ボードより、
表面がとてもきめ細やかで塗装の仕上がりがとても良い。
ギャクヨガが現在メインに使っているボードである
具体的な商品ラインナップについてはこちらをご覧ください。

主な取扱店は以下の通り。
クラッセ(ネット通販)
キャラヌノ(ネット通販)
ユザワヤ(楽天市場、及び一部店舗にて店頭販売)
・東急ハンズ(一部の店舗にて店頭販売)
・ACOS(一部の店舗にて店頭販売)
・アニメイト(一部の店舗にて店頭販売)
・らしんばん(一部の店舗にて店頭販売)
・まんだらけ(一部の店舗にて店頭販売)
・大塚屋車道本店
・ヴィレッジヴァンガードイオンモール(一部の店舗にて店頭販売)
COS-LOG(店頭販売)


こちらのページでCOSボードを使った作例や、更なる詳細を解説。
動画もご覧下さい。


2.コスプレボード
コスプレファクトリーが販売する商品。
従来販売されていた他社製品ボードより、
表面がとてもきめ細やかで塗装の仕上がりがとても良い。
具体的な商品ラインナップについてはコスプレ ファクトリーのサイトをご覧ください。

主な取扱店は以下の通り。
Amazon
コスプレ ファクトリー(楽天市場)
新宿オカダヤ(楽天市場、及び店頭販売)
仮装堂(店頭販売)


こちらのページでコスプレボードを使った作例や、更なる詳細を解説。
動画もご覧下さい。


3.ライオンボード(別名リアラボード、ソフトボード)
光洋産業が製造しているボード。
ライオンボードは通称であり、正式名称はリアラボード、ソフトボードである。

主な取扱店は以下の通り。
Amazon
東急ハンズ(店頭販売、及びネット通販)
・各種コスプレ関連インターネットショップ
・アニメイト、らしんばん等の一部のアニメ系ショップでの店頭販売
・一部のコスプレ関連ショップでの店頭販売
・一部の生地、手芸店(ユザワヤ等)での店頭販売
・一部の画材店での店頭販売
・一部の美術系大学の売店での店頭販売
・一部の大型ホームセンターでの店頭販売


こちらのページでライオンボードを使った作例等、更なる詳細を解説。
動画もご覧下さい。


4.EVAスポンジシート
100円ショップのダイソーで販売されている商品。
100円の為サイズが小さく商品バリエーションは少ないが、
全国各地のダイソーで手に入る為入手が容易なのが特徴。

こちらのページでより詳細に解説。
**********************************************************************


当作例はライオンボード(別名:リアラボード、ソフトボード)を使用した。

-------------------------------------------------------------------------------------------------------
【10mm厚COSボードをキャラヌノで買う】


【COSボードを楽天で買う】

-------------------------------------------------------------------------------------------------------
【10mm厚コスプレボードをAmazonで買う】


【コスプレボードを楽天で買う】

-------------------------------------------------------------------------------------------------------

**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************




Cut material into the Templates form.
Cut out 10mm thick EVA foam.


Cut out center. Cut out with a Box cutter.
Paste PVC pipe(diameter 18.0mm).
Glue with a Hot melt(glue gun).


Cut material into the Templates form.
Cut out 5mm thick EVA foam.
Paste with "Bond G17"(one of liqud glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(You may glue with a Liquid super glue. However "Bond G17"(one of liqud glue in Japan) is useful for the large area.)


-------------------------------------------------------------------------------------------------------
【5mm厚COSボードをキャラヌノで買う】


【COSボードを楽天で買う】

-------------------------------------------------------------------------------------------------------
【5mm厚コスプレボードをAmazonで買う】


【コスプレボードを楽天で買う】

-------------------------------------------------------------------------------------------------------

I finished glueing.


Cut the end with Box cutter.


I finished cutting.


Cut out 1.5mm or 2mm thick EVA foam.
Paste with "Bond G17"(one of liqud glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(You may glue with a Liquid super glue. However "Bond G17"(one of liqud glue in Japan) is useful for the large area.)
(for making flat surface.)


-------------------------------------------------------------------------------------------------------
【1.5mm厚COSボードをキャラヌノで買う】


【COSボードを楽天で買う】

-------------------------------------------------------------------------------------------------------
【1.5mm厚コスプレボードをAmazonで買う】


【コスプレボードを楽天で買う】

-------------------------------------------------------------------------------------------------------

Cut with a Box cutter.


Mark pattern by penn.


Dig marked pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)



I finished digging.


Make a guard.
Cut out 5mm thick EVA foam.
Glue with a Liquid super glue.
Draw patterns with a Hot melt(glue gun).


Make a grip end.
Cut out 5mm thick EVA foam.
Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About super glue
I use general liquid super glue.

**********************************************************************


Cut material into the Templates form.
Cut out 1.5mm or 2mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.
Glue with a Liquid super glue.



Glue with a Liquid super glue.


Make a grip.
Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

PUストレッチレザー 生地 無地 全52色 黄 オレンジ 赤 ピンク 青系 17色布幅130cm 50cm以上10cm単位販売
価格:176円(税込、送料別) (2019/1/23時点)


[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

ソフトエナメル 生地 無地 42色 モノトーン、ゴールド・シルバー系 全42色 布幅130cm 50cm以上10cm単位販売
価格:188円(税込、送料別) (2019/1/23時点)




Cut cloth. Cut with a Box cutter.


Glue with a Hot melt(glue gun).


Cut out 1.5mm or 2mm thick EVA foam.


Glue with a Liquid super glue.


How to paint
Begin painting.
At first, paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities page】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2."Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity.
 Then you can't get it easily.
 Please use others. For example, you can substitute wood glue for it.
-You must thin it with lacquer thinner.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Tutorial video】


【Commodities page】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things
-------------------------------------------------------------------------------------------
-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.

-------------------------------------------------------------------------------------------

I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial.
But I recommend Gesso for begginers.


Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Paint black color as undercoat color with Lacquer Spray.


Paint Bottle lacquer paint with a paint brush.
When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.


Please
I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.














Return to Top page