Nov.7
My Youtube channel moved this URL.
New Youtube Channel
Please subscribe again.
I'll upload videos this channell after this.
My profile

Monster Hunter series
Red scissor
How to make Big sword



Materials
[Materials for making templates]
-Drawing paper 20piece
-Scotch tape(Sellotape) 5piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→5mm thick 100cm X 200cm
→10mm thick 100cm X 10cm
-Liquid instant glue 10piece
-Hot melt(glue gun) 20piece
-PVC pipe(diameter 26.0mm) 1piece
-Wood stick 1piece

[Painting materials]
-"Bond G17"(one of liqud glue in Japan) 1000ml
-lacquer thinner 1000ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
10000Yen (about 100Yen = 1dollar)

Work time
37Hours

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Saw or Pipe cutter
-Paint tools, such as a paintbrush

Convenient tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
←100ml ←180ml ←420ml

Spec
Weight 3kg
Length 230cm

Template
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Make ground plan from "Kousakuyousi"(one of hard paper in Japan).



Ground plan was completed.


Make Templates by enfleshing Drawing paper on the ground plan.


Repeat cutting and pasting.


Repeat cutting and pasting.


Repeat cutting and pasting.


Repeat cutting and pasting.


Cut open.
Copy to new Drawing paper and make a fair copy.


Cut open.
Copy to new Drawing paper and make a fair copy.


Assemble the fair copy.


When you make a ideal from, cut open it. Use it.
When you want to know detailed tutorial of making Templates, browse this page.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


【5mm厚ライオンボード(別名:リアラボード)】
リアラボードという商品名ですがこれが俗に言うライオンボードです。


楽天なら


【5mm厚COSボード】


**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

**********************************************************************


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Insert a wood stick.
Glue with a Hot melt(glue gun).


Glueing was completed.


Make a tip parts
Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Glue with a Liquid instant glue.


Glueing was completed.
The tip parts can put on and take off.


Mark with a pen.


Shave with a Box cutter.


Make a grip.
Use a PVC pipe(diameter 26.0mm).
Cut a PVC pipe.
PVC pipe can be cut with a saw.
But a Pipe cutter is more better.
It can cut quickly and neatly.



This is a video of cutting method of PVC pipe, bending method, jointing method.


Cut one side slant.


Glue with a Hot melt(glue gun).


Cut out 10mm thick EVA foam.
Glue with a Hot melt(glue gun).


【10mm厚ライオンボード(別名:リアラボード)】
リアラボードという商品名ですがこれが俗に言うライオンボードです。


楽天なら


【10mm厚COSボード】


Cut out 10mm thick EVA foam.
Glue with a Hot melt(glue gun).


Cut out 10mm thick EVA foam.


Glue with a Hot melt(glue gun).


Make prickles.
Cut out 5mm thick EVA foam.
Glue with a Liquid instant glue.


Glue with a Hot melt(glue gun).
Draw patterns with a Hot melt(glue gun).


Make surface like crabs.
Make Broke piece of EVA foam scrap.
Mix scraps and "Bond G17"(one of liqud glue in Japan).



Paint mixed one twice with brush.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
However don't paint to parts made by Plastic sheets.
Dry it about 2 ~ 6 hours.


Paint red part roughly with Lacquer Spray


Paint red part roughly with Lacquer Spray.


Paint white part roughly with Lacquer Spray


Paint boader of color with a Airbrush politely.

←初心者にもオススメのセット、私も愛用してます。

Painting was completed.


Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
These are new videos.
























Return to Top page