MAIL
I have facebook.
I'm writting about new props in English.

How to make Chain saw


Materials
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5piece
-Scotch tape(Sellotape) 1piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 30cm
→5mm thick 100cm X 30cm
→10mm thick 100cm X 50cm
-Liquid instant glue 5piece
-Hot melt(glue gun) 10piece(When you use a Air duster for cooling, it's convenient)
-"Jiyujizai"(one of wire in Japan)
→6mm 50cm

[Painting materials]
1.When a undercoat is Gesso
-Gesso 150ml
-lacquer paint(Bottle lacquer paint,Lacquer Spray) or acrylic paint proper quantity

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 300ml
-lacquer thinner 300ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
3000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Paint tools, such as a paintbrush
-Pliers

Convenient tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
←100ml ←180ml ←420ml

Work time
20Hours

Spec
-

Template
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Cut out 10mm thick EVA foam.
Glue with a Liquid instant glue.
*After this some pictures are slightly strange.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


【10mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【10mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【10mm厚COSボードを楽天で買う】


【10mm厚COSボードをネット通販で買う】


**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


**********************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

**********************************************************************


Make place inseted a blade.
Glue with a Liquid instant glue.


It's insertied state.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Make the handle.
Use a "Jiyujizai"(one of wire in Japan) of diameter 6mm.
Cut it with Pliers.
Bend with hands and Pliers.

←様々な太さ有り

Cut out 2mm or 1.5mm thick EVA foam.
Glue with a Liquid instant glue.


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【1.5mm厚COSボードを楽天で買う】


【1.5mm厚COSボードをネット通販で買う】


Glueing was completed.


Make a blade.
Cut out 5mm thick EVA foam.
Cut out 2mm or 1.5mm thick EVA foam.
Make size of 2mm or 1.5mm thick EVA foam a size smaller
( In order to paste some small blades, it's must be a size smaller.)


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【5mm厚COSボードを楽天で買う】


【5mm厚COSボードをネット通販で買う】


Use Aluminum stick as a core.
You can use a Wood stick, a plastic stick, a Gardening stick made by glass fiber instead of it.
(If you worry about strength, insert Gardening stick made by glass fiber the inside of Aluminum stick.Details are here.)
Cut it into appropriate length with a Pliers.


Cut out center.
Glue the Aluminum stick.
Glue with a Hot melt(glue gun).
(Paste position written red line.)



Make small blades.
Cut out 2mm or 1.5mm thick EVA foam.


Cutting was completed.


Glue with a Liquid instant glue.


Make things like a rivet.
Make rivets with a Hot melt(glue gun).
Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)

←ガス充填式ライターとガスボンベを使うとお得

Paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan). (Moving parts in particular)
-It can't use for PVC pipe or plastic sheets.

【Recommendation】
-Weapons
-Armors without a moving part.

【Undercoat】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2.Thinned "Bond G17"(one of liqud glue in Japan)
This is difficult.

【Merit】
-It's sold in D.I.Y shops.
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-You must thin it.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Recommendation】
-All props
(Props with a moving part in particular)

【Tutorial video】


【Undercoat】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things

【Paint】
Lacquer Spray or Bottle lacquer paint

-------------------------------------------------------------------------------------------

I use Gesso in this tutorial.


Paint Gesso twice or three times with a brush.
Dry it about 2 ~ 6 hours.


Paint black color as undercoat color with Lacquer Spray.
Paint Lacquer Spray and Bottle lacquer paint.

When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.


Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
Click this↓ And Click "subscribe".











Visitor's works
まりあさん
不出来ですが、ギャクヨガ様のサイトを参考に
消滅都市の☆5スミレのチェーンソーを作りました。
明確な公式画像がなかったため、デザイン・色共に私の想像入っております。




ツッキーさん
ギャクヨガさんのサイトを参考にチェーンソーを作製しました。
そして本日、幕張メッセでのVAMPSのHalloween Partyの仮装で、
バイオハザードのチェーンソー男のコスをしました!!
刃の造り方をはじめ、とても参考になりました、ありがとうございました(*・ω・)*_ _)


Return to Top page