MAIL
I have facebook.
I'm writting about new props in English.

FINAL FANTASY Type-0
Seven's weapon
How to make Whip sword



Materials
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5piece

[Main materials]
-EVA foam
→5mm thick 100cm X 30cm
-"Kousakuyousi"(one of hard paper in Japan) 1piece
-Synthetic leather 100cm X 10cm
-Liquid instant glue 8piece
-Hot melt(glue gun) 10piece(When you use a Air duster for cooling, it's convenient))
-"Jiyujizai"(one of wire in Japan)
→10mm 200cm
-PVC pipe(diameter 26.0mm) 1piece

[Painting materials]
1.When a undercoat is Gesso
-Gesso 150ml
-lacquer paint(Bottle lacquer paint,Lacquer Spray) or acrylic paint proper quantity

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 300ml
-lacquer thinner 300ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
3000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Saw or Pipe cutter
-Paint tools, such as a paintbrush
-Pliers

Convenient tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
←100ml ←180ml ←420ml

Work time
20Hours

Spec
Weight 700g
Length 220cm

Template
PDF format(A4 size) or JPG format

When you use templates, please subscribe my youtube channel.
Click this↓ And Click "subscribe".

-If you print on browser, it may not be full scale. You should save the file on your PC, then print the file.
-In case of PDF format, use Adobe Reader(free ware).
-In case of JPG format, When you print it by magnification 100%, it will be full scale.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Make Templates from "Kousakuyousi"(one of hard paper in Japan).



Make block parts.
Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【5mm厚COSボードを楽天で買う】


【5mm厚COSボードをネット通販で買う】


**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Make hole with a Punch.

←手で押しこむだけでお手軽なタイプ←ハンマーで叩くタイプ

Making holes was completed.


Cut it into slant with a Box cutter.


Cutting was completed.


Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

**********************************************************************


Heap a Hot melt(glue gun) for reinforcement.



Glue with a Liquid instant glue.


Make 8 pieces.


Mark pattern with a pen and the Templates.


Marking was completed.


Dig marked pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)



Digging was completed.


Make blade.
Copy the edges of Templates on a material with a pen.
Cut out 2mm or 1.5mm thick EVA foam.
Cut out "Kousakuyousi"(one of hard paper in Japan).


Reinforce 2mm or 1.5mm thick EVA foam.
Glue "Kousakuyousi"(one of hard paper in Japan) and EVA foam with "Bond G17"(one of liqud glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(If you want more strength, use plastic sheets instead of "Kousakuyousi"(one of hard paper in Japan). Details are here.)



Glueing was completed.
Make a break with a Box cutter.


Combine. Glue with a Hot melt(glue gun).


Make a cord part.
Use a "Jiyujizai"(one of wire in Japan) of diameter 10mm.


Make notches on the end of "Jiyujizai"(one of wire in Japan) to prevent falling out.
(Shown part by red line)
Glue with a Hot melt(glue gun).


Make grip.
Use a PVC pipe(diameter 26.0mm).
Cut PVC pipe. PVC pipe can be cut by saw. But Pipe cutter is more bettr.Pipe cutter can cat quickly and beautifull.



Paste together parts cut out from 2mm or 1.5mm thick EVA foam with a Liquid instant glue.


Glueing was completed.


Paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan). (Moving parts in particular)
-It can't use for PVC pipe or plastic sheets.

【Recommendation】
-Weapons
-Armors without a moving part.

【Undercoat】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2.Thinned "Bond G17"(one of liqud glue in Japan)
This is difficult.

【Merit】
-It's sold in D.I.Y shops.
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-You must thin it.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Recommendation】
-All props
(Props with a moving part in particular)

【Tutorial video】


【Undercoat】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things

【Paint】
Lacquer Spray or Bottle lacquer paint

-------------------------------------------------------------------------------------------

I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial.
But I recommend Gesso for begginers.


Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.
A stick lets pass in block.


Dry it about 2 ~ 6 hours.


Paint black color as undercoat color with Lacquer Spray.


Paint Bottle lacquer paint by Drybrush painting.
(Drybrush painting is easy, you can do it with a paint brush. Details are here.)


When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.


Glue with a Hot melt(glue gun).


Paint gold of Bottle lacquer paint with a paint brush.


Cut Synthetic leather into a belt form.
Glue with a Hot melt(glue gun).



Glueing was completed.


Make notches on the end of "Jiyujizai"(one of wire in Japan) to prevent falling out.
(Shown part by red line)
Glue with a Hot melt(glue gun).


Glueing was completed.



Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
Click this↓ And Click "subscribe".





This is can be bended favorite form.










Return to Top page