MAIL
I have facebook.
I'm writting about new props in English.

Monster Hunter series
How to make How to make Dual Swords "Rekkusuraisa-"



Materials
[Materials for making pattern paper]
-Drawing paper 10piece
-"Kousakuyousi"(one of hard paper in Japan) 5piece
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-"Lion Board(Koyo Soft Board)"
→2mm thick(1.5mm is also OK) 100cm X 100cm
→5mm thick 100cm X 1000cm
-"Bond G17"(one of liqud glue in Japan) 100ml
-"Kousakuyousi"(one of hard paper in Japan) 10piece
-Liquid instant glue 15piece
-Hot melt(glue gun) 60piece
-PVC pipe(diameter 26.0mm) 1piece
-Paper clay 1piece

[Painting materials]
1.Case of Gesso painting
-Gesso 150ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

2.Case of "Bond G17" painting
-"Bond G17"(one of liqud glue in Japan) 300ml
-lacquer thinner 300ml
-Paintbrush(Disposable premise ) 1piece
-Paper cup,bowl etc.(Disposable premise ) 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*Paiting are is written in the package, refer it. Detail is here.

Materials cost
7000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Sizzer
-Box cutter(It's good to change "Pro blade". Moreover,It will become convenient if there is also "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Saw(Pipe cutter is also OK)
-Paint tools, such as a paintbrush

Convenience tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly.
It's so useful for glueing small part. Detail is here.
←100ml ←180ml ←420ml

Work time
45Hours

Spec
Weight 800g
Length 100cm

Pattern paper data
I threw away the Pattern paper, so It's can't upload.

Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

How to make
Make Pattern paper by "Kousakuyousi"(one of hard paper in Japan).



Cut and paste and brings close ideal form.


Pattern paper was completed.


Copy the edges of Pattern paper on a material with a pen.
Cut out 10mm thick "Lion Board(Koyo Soft Board)".
Make three same forms with "Kousakuyousi"(one of hard paper in Japan).


*******************************************************************************************

It's Japanese most famous material for cosplay props.
It's a soft board, and it can be bended.(Details are here.)
And "Lion Board(Koyo Soft Board)" is sold only in Japan.

Then, if you live in except japan, you must use other materials.
A EVA board is usable in substitution for "Lion Board(Koyo Soft Board)".
It's called EVA foam, EVAzote, too.
Many world cosplayers are using EVA board.
(I don't know well about EVA board, sorry. Plase study by Google)
Or, basicly soft and can bended board is substitutes.
Then find the materials in your country.

I don't know material information of except japan.
Then you must call for help to your country cosplayers, if you know more information of materials.
There are many world cosplayers in Worldcosplay.
Please find your contry cosplayer by this site. And ask them.
http://ja.worldcosplay.net/

Or, ask japanese material shops that the shop can send "Lion board" to your country.
Thease are shops selling "Lion board".
http://www.rakuten.ne.jp/gold/cosprop/ This site has Japanese page only.
http://www.tokyu-hands.co.jp/foreign.html This site has English page too.
*******************************************************************************************


【10mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私がライオンボードを使う場合はリアラボードという商品名の物を使用しています。
こちらは通常&特大サイズ。お買い得な複数枚セット商品も有り。


ハーフサイズ。お買い得な複数枚セット商品も有り。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【10mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買うなら】


【10mm厚COSボードをネット通販で買う】


【10mm厚COSボードを楽天市場で買う】


*******************************************************************************************

At first, use sharp blade. For example, "Pro Blade".
This is so sharp.
In addition, use big size Box cutter.
Big size can cut well more than small size.
←10枚入り ←50枚入りお得パック

When you cut, put "Lion Board(Koyo Soft Board)" on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

*******************************************************************************************


Paste with Hot melt(glue gun).


Cut out "Kousakuyousi"(one of hard paper in Japan).
Paste together with Hot melt(glue gun).



Paste edge of blade with "Bond G17"(one of liqud glue in Japan).
Using broken piece of "Kousakuyousi"(one of hard paper in Japan) as brush is convenience.
Don't use fire after painting until drying, because "Bond G17"burns easily. Don' use Lighter etc until drying.
If you worry blade is "Kousakuyousi"(one of hard paper in Japan), use Plastic sheets too. Details are here.



Paste "Lion Board(Koyo Soft Board)" and "Kousakuyousi"(one of hard paper in Japan) to opposite side with Hot melt(glue gun) similarly.


Paste Liquid instant glue to edge of blade.


Cut PVC pipe. PVC pipe can be cut by saw. But Pipe cutter is more bettr.Pipe cutter can cat quickly and beautifull.



Paste with Hot melt(glue gun).


Pasting was completed.


Make claws.
Make Pattern paper by Drawing paper.
When you want to know how to make fundamental Pattern paper,watch this page.



Cut and paste and brings close ideal form.


Cut and paste and brings close ideal form.


When you make ideal form, it's cut open.Let it be formal Pattern paper.


When you make ideal form, it's cut open.Let it be formal Pattern paper.


Copy the edges of Pattern paper on a material with a pen.
Cut out 5mm thick "Lion Board(Koyo Soft Board)".


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私がライオンボードを使う場合はリアラボードという商品名の物を使用しています。
こちらは通常&特大サイズ。お買い得な複数枚セット商品も有り。


ハーフサイズ。お買い得な複数枚セット商品も有り。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買うなら】


【5mm厚COSボードをネット通販で買う】


【5mm厚COSボードを楽天市場で買う】


Paste together with Liquid instant glue.
Use Instant glue Accelerator to make good progress.
(In use, steam may be generated. But don't don't breath. And don't meet the steam in eyes.)


*******************************************************************************************

Instant glue can plane surface easy.
But it can't narrow surface well.
Then you should use bellow spray.
I always use this.
Watch movie.

For example, use bellow surface.


Instant glue Accelerator
This can stick surface in several seconds.
100ml can stick one armorset or about three weapons..
←100ml ←180ml ←420ml

About instant glue
General liquid Instant glue is OK.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can stick too. It's can stick narrow surface too.
But it's take time more than Liquid instant glue and Instant glue Accelerator.
And "Bond G17"(one of liqud glue in Japan) may melt stuck surface if you use "Bond G17" painting.
(You should reinfore stuck surface with Liquid instant glue. Or use Gesso painting.)
After all Liquid instant glue and Instant glue Accelerator is the best.

*******************************************************************************************


Pasting was completed.


Make six claws.


Shave form with Box cutter.


Serve with Hot melt(glue gun).


Paste with Hot melt(glue gun).


Make skin.
Cut out 2mm(1.5mm is also OK) thick "Lion Board(Koyo Soft Board)".


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私がライオンボードを使う場合はリアラボードという商品名の物を使用しています。
こちらは通常&特大サイズ。お買い得な複数枚セット商品も有り。


ハーフサイズ。お買い得な複数枚セット商品も有り。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買うなら】


【1.5mm厚COSボードをネット通販で買う】


【1.5mm厚COSボードを楽天市場で買う】


Paste together with Liquid instant glue.


Serve Hot melt(glue gun) as reinforce to backside.


Paste with Hot melt(glue gun).


Cut Synthetic leather to belt form.
Paste with Hot melt(glue gun).


Pasting was completed.


Mark scales. Mark by penn.


Serve with Hot melt(glue gun).


Serving was completed.


Paint.
Use "Bond G17" painting. Details are here.


Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner at 3 or 4 times.
Don't use fire after painting until drying, because "Bond G17"burns easily. Don' use Lighter etc until drying.
The parts will be charred in seconds.
Desiccate for 4 or 5 hours.(It may become dry for 1 or 2 hours, but Desiccating for 4 or 5 hours is better.)


Reproduce characteristic skin.
Mix rices and "Bond G17"(one of liqud glue in Japan).


Paint mixed one.


Reproduce characteristic skin.
Mix a paper cray and "Bond G17"(one of liqud glue in Japan).



Paint mixed one.
Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner at 3 or 4 times.
Don't use fire after painting until drying, because "Bond G17"burns easily. Don' use Lighter etc until drying.
The parts will be charred in seconds.
Desiccate for 4 or 5 hours.(It may become dry for 1 or 2 hours, but Desiccating for 4 or 5 hours is better.)


Desiccate for 4 or 5 hours.(It may become dry for 1 or 2 hours, but Desiccating for 4 or 5 hours is better.)
Paint Bottle lacquer paint with Airbrush.

←初心者にもオススメのセット、管理人も使ってます。

Stick Masking tape so that paint may not adhere to unrelated place.
Maskig all with Masking tape is wasteful.So use newspaper too.


Paint with Lacquer Spray.


Paint Bottle lacquer paint with Airbrush.


Youtube video and completed photos
I uploaded video version of this tutorial.
Please watch this too.






Visitor's works
【コトノカナさん Twitter
モンスターハンタージンオウ装備&レックスライサー
どちらもギャクヨガさんを参考に作りましたヽ(・∀・)ノ
いつもお世話になっております…


Return to Top page