MAIL
I have facebook.
I'm writting about new props in English.

Sengoku Basara
Matsunaga Hisahide's katana
How to duplicate of family crest



Materials
[Materials for making pattern paper]
-

[Main materials]
-Plastic sheets 0.5mm thick 1piece
-Polyester putty 50g
-Necessary tool to copy by silicon one side pettern

[Painting materials]
-Plastic Primer 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*Paiting are is written in the package, refer it. Detail is here.

Materials cost
1000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Sizzer
-Paint tools, such as a paintbrush
-Things required for processing plastic sheets(sandpaper etc)

Convenience tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly.
It's so useful for glueing small part. Detail is here.
100ml 180ml 420ml

Work time
4Hours

Spec
-

Pattern paper data
I threw away the Pattern paper, so It's can't upload.

Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

How to make
Mark family crest on Plastic sheets by penn.



Cut off by scissors.


Serve Polyester putty.

120g 1kg

Polish left points with Sand paper.


Mark pattern with a pencil, when it bacome somewhat flat


Dig ditchs along mark with stick files.
Served Polyester putty to hollows and flaws.


Polish Sand paper(around 400grit).


Duplicate by one side silicon mold.
Details of duplicating parts with a one side silicon mold are here.







Set frames.
Pour silicon.
Details of duplicating parts with a one side silicon mold are here.





Wait untile hardening.
Take off frames when silicon hardens.
Details of duplicating parts with a one side silicon mold are here.


Duplicate by casting resin.
Details of duplicating parts with a one side silicon mold are here.



Pour casting resin.
Details of duplicating parts with a one side silicon mold are here.


Take off from the mold when casting resin hadens.
Repeat 8 times and make 8 pieces.
Details of duplicating parts with a one side silicon mold are here.


Clean surface with "bure-kuri-n(one of Jpanese cleaning riquid for industrial use) ".
Details of duplicating parts with a one side silicon mold are here.



Paint.
Splay Surface Primer for casting resin.
Details of duplicating parts with a one side silicon mold are here.



Paint black color as undercoat color with Lacquer Spray.


Paint gold color of Bottle lacquer paint with paintbrush.


When paint Bottle lacquer paint, There should just be paintbrush,silicon cup(Use as paint plate. Easy to peel after dry.),
mixing colors stick,thinner.


Paste with Liquid instant glue.


Youtube video and completed photos
I uploaded video version of this tutorial.
Please watch this too.














Return to Top page