I have facebook.
I'm writting about new props in English.
Monster Hunter series
How to make armor set (with templates)
Materials for making all parts
[Materials for making templates]
-Drawing paper 10piece
-"Kousakuyousi"(one of hard paper in Japan) 5piece
-Tracing paper 10m
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece
→2mm or 1.5mm thick 100cm X 100cm
→5mm thick 100cm X 150cm
→10mm thick 100cm X 10cm
-Synthetic leather 100cm X 100cm
-Cloth 100cm X 200cm
-"Bond G17"(one of liqud glue in Japan) 300ml
-Liquid instant glue 10piece
-Polyester putty 100g
-Hot melt(glue gun) 30piece(When you use a Air duster for cooling, it's convenient))
-"Jiyujizai"(one of wire in Japan) 50cm
-"Mini Rock" 4piece
-Shape of ring metal parts 4piece
-Beads proper proper quantity*
1.When a undercoat is Gesso
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 100ml
-lacquer thinner 100ml
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece
*The paiting area is written in the package, refer it. Details are here.
Materials cost for making all parts
25000Yen (about 100Yen = 1dollar)
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Hot melt(glue gun)
-Soldering iron and soldering iron stand
-Paint tools, such as a paintbrush
-Pinvice or Prick punch etc
-Punch and hammer
-Tool set required for rivet
Convenient tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
←100ml ←180ml ←420ml
Work time for making all parts
Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.
-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.
-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.
-Don't use fire near the things which are easy to burn such as paint, thinner etc.
-When you finished using tools, pull an outlet.
-Read labels of materials and tools, and understand how to use.
How to make
Return to Top page