MAIL
I have facebook.
I'm writting about new props in English.

Attack on titan(shingeki no kyojin)
How to make "3d maneuver gear"(Rittai kidou souti) (with templates)
Comic version
Vol.1 blade part



Materials
[Materials for making templates]
-Drawing paper 10sheets
-"Kousakuyousi"(one of hard paper in Japan) 10sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 30cm
→5mm thick 100cm X 80cm
→10mm thick 100cm X 100cm
-Synthetic leather 100cm X 10cm
-"Bond G17"(one of liqud glue in Japan) 100ml
-Liquid instant glue 12pieces
-Hot melt(glue gun) 30pieces (When you use a Air duster for cooling, it's convenient)
-Aluminum stick 2piece(diameter is about 5.0mm) or flat alminium stick 2piece(thickness is about 2mm)
-Velcro 120cm
-cord 5m
-Hook 1piece

[Painting materials]
1.When a undercoat is Gesso
-Gesso 300ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
→Case of lacquer painting
Bottle lacquer pain silver 1piece
Bottle lacquer pain the color like woods 1piece
Bottle lacquer pain the color like grain of wood 1piece
Lacquer Spray black 1piece
Lacquer Spray silver 1piece
-Masking tape 1piece

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 700ml
-lacquer thinner 700ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
8000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Paint tools, such as a paintbrush
-Pliers
-Punch and hammer

Convenient tools when you have
-Art knife PRO
-Circle cutter
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
←100ml ←180ml ←420ml

Work time
38hours

Spec


Template

PDF format(A4 size) JPG fomat
Blade 表示 表示
Seath 表示 表示
Tank 表示 表示
Anchor and frame 表示 表示
Belt 表示 表示

When you use templates, please subscribe my youtube channel.
Click this↓ And Click "subscribe".

-If you print on browser, it may not be full scale. You should save the file on your PC, then print the file.
-In case of PDF format, use Adobe Reader(free ware).
-In case of JPG format, When you print it by magnification 100%, it will be full scale.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Size:Free size
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Make Templates from "Kousakuyousi"(one of hard paper in Japan).
Pattern paper is here.
When you want to know detailed tutorial of making Templates, browse this page.



Make Templates from "Kousakuyousi"(one of hard paper in Japan).


Cut Templates every parts.


Make the blade.
There are 2 kinds of how to make the blade.

[Vol.1 Easy method]
Cut "Kousakuyousi"(one of hard paper in Japan) into a belt form.


Put "Kousakuyousi"(one of hard paper in Japan) side by side.


Glue the belt with a Hot melt(glue gun).



Copy the edges of Templates on a material with a pen.
Cut out "Kousakuyousi"(one of hard paper in Japan).


Use Aluminum stick as a core.
You can use a Wood stick, a plastic stick, a Gardening stick made by glass fiber instead of it.
(If you worry about strength, insert Gardening stick made by glass fiber the inside of Aluminum stick.Details are here.)
Cut it into appropriate length with a Pliers.


Use the two pieces of about 5mm in diameter.
Glue the Aluminum stick.
Glue with a Hot melt(glue gun).



Glue another blade.
Glue with a Hot melt(glue gun).
(If you want to more strong blade, use also Plastic sheets. Details are here.)


Glueing was completed.


Cut out 5mm thick EVA foam.


Paste to the back of blade.
Glue with a Liquid instant glue.


Paste edge of blade with "Bond G17"(one of liqud glue in Japan).
Paint it with a broken piece of "Kousakuyousi"(one of hard paper in Japan) as a brush.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



Reinforce the blade by painting Liquid instant glue on the edge.


Fill it up with a Hot melt(glue gun).


Fill it up with a Hot melt(glue gun).


Fill it up with a Hot melt(glue gun).


Cut it into appropriate length.


complete.


[Vol.2 The Method can bend the blade.]
Copy the edges of Templates on a material with a pen.
Cut out 2mm or 1.5mm thick EVA foam.


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【1.5mm厚COSボードを楽天で買う】


【1.5mm厚COSボードをネット通販で買う】


Use a flat aluminum stick.


Make a space for the flat aluminum stick.
Mark with a pen.


Cut out with a Box cutter.


Make holes on the patterns of the Templates. Mark them with a pen.


Mark pattern by penn.


Mark pattern by penn.


Marking was completed.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Cut Aluminum stick to length with a sufficient degree with stick files.


Cut out 2mm or 1.5mm thick EVA foam.
Glue with a Liquid instant glue.


Glueing was completed.


Make a position of 5mm from the edge with a pen.


Cut slant with Box cutter.


Cutting was completed.


Dig a ditch with a Box cutter.


Complete.


It can be bend.


Make the grip part.
Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Make a space for the blade.
Mark with a pen.


Cut out with a Box cutter.
Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

**********************************************************************


The blade can be put on and took off.
Insert the blade by way of experiment.


Shave the surface if you can't insert easy.
If it fall out easily, Heap with a Hot melt(glue gun).


Cut out 5mm thick EVA foam.
Cut out 10mm thick EVA foam.


【10mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【10mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【10mm厚COSボードを楽天で買う】


【10mm厚COSボードをネット通販で買う】


Glue with a Liquid instant glue.


Shave the corner with a Box cutter.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)

←ガス充填式ライターとガスボンベを使うとお得

Copy the edges of Templates on a material with a pen.
Cut out 2mm or 1.5mm thick EVA foam.


Mark pattern by penn.


Glue with a Liquid instant glue.


Dig marked pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)



Make the ring form parts.
Cutting with Box cutter is also good, but Using Prick punch is better.
Cut 2mm or 1.5mm thick EVA foam into a circle form with a Prick punch.
Make a ring by cutting it with a small Prick punch.

←手で押しこむだけでお手軽なタイプ←ハンマーで叩くタイプ

Glue with a Liquid instant glue.


Cut 2mm or 1.5mm thick EVA foam thin.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Make a difference in level.
Cut out with a Box cutter.


Cut 2mm or 1.5mm thick EVA foam thin.
Glue with a Liquid instant glue.


Dig a pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)


Copy the edges of Templates on a material with a pen.
Cut out 10mm thick EVA foam.


Glue with a Liquid instant glue.
Form by shaving with a Box cutter.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Glue with a Liquid instant glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Complete.


To be continued vol.2(sheath part)

Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
Click this↓ And Click "subscribe".


























Return to Top page